• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2003.04a
• /
• pp.45-52
• /
• 2003

A finite element procedure to estimate ultimate strength of space frames considering spread of plasticity is presented. The improved displacement field is introduced based on inclusion of second order terms of finite rotations. All the nonlinear terms due to bending and torsional moment as well as axial force are precisely considered. The concept of plastic hinge is introduced and the incremental load/displacement method is applied for the elasto-plastic analysis. The initial yield surface is defined based on the residual stress and the full plastification surface is considered under the combined action of axial force, bending and torsional moments. The elasto-plastic stiffness matrices are derived using the flow rule and the normality condition of the limit function. Finite element solutions for ultimate strength of space frames are compared with available solutions and experimental results.

• International Journal of Railway
• /
• v.5 no.1
• /
• pp.22-28
• /
• 2012

This report is devoted to the problems of Mongolian Railway Transportation Safety such as high length of wagon service life, defects due to the more factors of exploitation, idle time, increase of faults, poor condition of repairing shops and more hand and mechanical operations and these conditions are quite difficult to meet the safety and reliability of increasing transportation from day to day. The paper discusses that the most optimum solution is diagnosing before occurring wear, breakdown, and defects on the basis of studying characteristics of structural material breakdown, residual methods of voltage, effects of material hardness and linear defects of a crystal net and the reform of machines is very important to implement it. It focuses the structures, characteristics of the material transportation and tests and analyses of the wagon cart which has to meet the traffic safety of wagons and slow and soft movement. The study is done on the wagon chassis which has to meet the traffic safety of luggage wagons.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.4
• /
• pp.406-416
• /
• 1994

In this study the reactor design procedure and method of solid-solid-gas chemical heat pump system using STELF technology were investigated. For manufacturing IMPEX block which is the kernel of reactor, proper salt pair should be selected, and equilibrium temperature drop and COP should be examined for selected salt pair. Moreover, apparent density, residual porosity, and graphite ratio should be calculated to give minimum block volume and mass, and maximum energy density without causing heat and mass transfer problems. Since heat exchange area can be changed with operating condition, reactor diameter, length, and stainless steel thickness should be decided for desired specifications. These procedure and method were applied to the case study of 6kW cold production and 8 hours storage capacity reactor.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.7
• /
• pp.756-763
• /
• 2008

This paper presents an inchworm with three piezoelectric actuators. The dynamic stiffness of the inchworm is generally low compared to its driving condition, so mechanical vibration may degenerate the motion accuracy of the inchworm. The dynamic model of inchworm is identified by curve fitting technique based on the experimental frequency response function. For the precision motion control and low residual vibration of inchworm, driving input signal is designed by using cycloid step input and LQG control technique. Experimental result shows that proposed input shaping method is applicable effectively to the inchworm.

• Journal of Environmental Science International
• /
• v.19 no.3
• /
• pp.261-267
• /
• 2010

The variation of assimilable organic carbon(AOC) concentration at each condition of ozonation was investigated using a model water and drinking water resource. AOC concentration of model raw water and drinking water resource tended to increase at low ozone dose. The maximum AOC concentration was detected when the residual ozone begin to be measured. Also, the AOC concentration increase at pH 8 compared to both pH 6 and 7 while that for pH 9 decreased rapidly. The removal characteristics of trihalomethane formation potential(THMFP) by ozonation was also investigated. Unlike the trend of AOC, the THMFP concentration never increased by ozonation but decreased even at low ozone dosage. From these results, the ozone dosage would be effective to simultaneously decrease both AOC and THMFP.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.149-150
• /
• 2008

본 연구는 GIS 변전소 내 Dead Bus의 잔류전압 평가에 관한 것이다. 차단기 개방시 발생된 잔류전압이 철공진 현상에 의한 것임을 증명하고 원활한 CB의 재투입을 위해 사선모선의 전압조건 설정시 공진 과전압을 고려하여 재설정 하였다. 철공진 현상을 모의하기 위해 PSCAD/EMTDC를 이용하여 적절한 PT 모델링 방안을 제시하였고 이를 PT 철공진 측정시험결과와 비교 검증하였다. 또한, 제안된 PT 모델과 다양한 GIS 모선 운영에 따른 계통회로를 구성하여 사선모선의 잔류전압을 계산하였다.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.3
• /
• pp.575-581
• /
• 1996

Hemophilia is a hereditary condition in which one of the normal blood clotting factors is absent. This sex-linked, recessive disease, transmitted by the female and expressed in some of her male offspring, is characterized by significantly delayed coagulation times and by the tendency to hemorrhage. On the dental treatment especially, surgical procedure, appropriate methods of hemorrhage control are required. These methods are replacement therapy, antifibrinolytic agents, and local hemostatic methods. In this case, we successfully extract residual roots of hemophiliac patient without eccessive post operative bleeding using replacement therapy and surgical splint.

• 한국전산유체공학회:학술대회논문집
• /
• 1999.11a
• /
• pp.17-22
• /
• 1999

Convergence characteristics and efficiency of three implicit approximate factorization schemes(ADI, DDADI and MAF) are examined using 2-Dimensional compressible upwind Navier-Stokes code. Second-order CSCM(Conservative Supra Characteristic Method) upwind flux difference splitting method with Fromm scheme is used for the right-hand side residual evaluation, while generally first-order upwind differencing is used for the implicit operator on the left-hand side. Convergence studies are performed using an example of the flow past a NACA0012 airfoil at steady transonic flow condition, i. e. Mach number 0.8 at $1.25^{\circ}$ angle of attack. The results were compared with other computational results in order to validate the current numerical analysis. The results from the implicit AF algorithms were compared well in low surface with the other computational results; however, not well in upper surface. It might be due to lack of the grid around the shock position. Because the algorithm minimizes the errors of the approximate decomposition, the improved convergence rate with MAF were observed.

• Journal of Korean Neurosurgical Society
• /
• v.51 no.4
• /
• pp.233-236
• /
• 2012

Osteochondroma is a rare condition in the spine that may be indolent due to its slow growth. The authors present a case of 32-year-old man with subclinical osteochondroma in the cervical spine presenting as Brown-Sequard syndrome after trivial neck trauma. After resection of the tumor through hemilaminectomy, his symptoms were improved with mild residual sequelae.

• Communications of the Korean Mathematical Society
• /
• v.24 no.1
• /
• pp.127-144
• /
• 2009

Let f be a diffeomorphism of a compact $C^{\infty}$ manifold, and let p be a hyperbolic periodic point of f. In this paper we introduce the notion of $C^1$-stable inverse shadowing for a closed f-invariant set, and prove that (i) the chain recurrent set $\cal{R}(f)$ of f has $C^1$-stable inverse shadowing property if and only if f satisfies both Axiom A and no-cycle condition, (ii) $C^1$-generically, the chain component $C_f(p)$ of f associated to p is hyperbolic if and only if $C_f(p)$ has the $C^1$-stable inverse shadowing property.