• Proceedings of the KSEEG Conference
• /
• 2003.04a
• /
• pp.157-160
• /
• 2003

해마다 늘고 있는 토사유출희 인한 피해는 자연재해의 측면에서 매우 중요한 과제로 다루어지고 있으며, 토사유출에 의한 환경피해를 최소화하기 위해 토양유실량의 산정에 많은 연구가 진행되고 있다. 그러나 사면에서의 토양유실량 산정방법 및 산정된 결과에 대한 검증 역시 현실적으로 매우 어렵기 때문에 일반적으로 국내에서는 토양유실량산정을 위해 범용토양유실공식(Universal soil loss equation)을 사용하고 있다. 범용토양유실공식(USEL)은 실험적 근거가 미비한 국내실정에서 일반적으로 활용되고 있기 때문에 공식의 적용에 대한 다양한 실험적 연구가 필요하였다. 따라서 본 연구는 남한강 유역 여주-이포 구간을 대상으로 2002년 6월부터 2002년 10월까지 수행된 자연 상태에서의 토양침식실험과 실험지역의 USLE의 적용을 검토하였다. 토양침식실험을 통하여 산정된 침식율과 범용토양유실공식의 결과를 비교하였으며 USLE의 인자에 따른 토양유실량 산정 결과의 변화를 검토하고자 하였다. 남한강 유역에서의 토양침식 실험결과 자연 상태에서 연간토양유실량은 평균 12.54ton/acre/year이었으며, 최소 0.1ton/acre/year, 최대 34.06ton/acre/year로 나타났다. USLE에 의해 계산된 연간토양유실량은 17.15ton/acre/year로서 실험결과와는 많은 차이가 있었다. 이러한 차이는 토양유실량 산정에 필요한 다양한 조건을 정량화하는 과정에서 발생하는 것으로, USLE식에 활용되는 인자의 적용방법에 따라 커다란 차이를 보였다. 따라서 USLE에 의해 산정된 결과를 사용하기 위해서는 다양한 조건에 대한 검토가 이루어져야하며 USLE 산정에 관한 지속적인 실험적 연구가 이루어져야 하겠다. 증가할 것이다. 또한 부분육을 이용한 완전제품, 적색육제품, 유기농이나 별미식 제품과 같은 형태의 다양한 포장육 제품이 도입 될 것으로 생각되어진다.e in vitro SPF test method will be able to be used as an alternative method for in vivo SPF in case of lotion and cream. replica. A statistically significant improvement of Star Fruit Leaf Extract BG30-treated site was seen in decreased wrinkles. Star Fruit Leaf Extract BG30 results in clinically visible improvement in wrinkling when used topically for 5 weeks. 또한 관계마케팅, CRM 등의 이론적 배경이 되고 있는 신뢰와 결속의 중요성이 재확인하는 결과도 의의라고 할 수 있다. 그리고 신뢰는 양사 간의 상호관계에서 조성될 수 있는 특성을 가진 반면, 결속은 계약관계 초기단계에서 성문화하고 규정화 할 수 있는 변수의 성격이 강하다고 할 수가 있다. 본 연구는 복잡한 기업간 관계를 지나치게 협력적 측면에서만 규명했기 때문에 많은 측면을 간과할 가능성이 있다. 또한 방법론적으로 일방향의 시각만을 고려했고, 횡단적 조사를 통하고 국내의 한 서비스제공업체와 관련이 있는 컨텐츠 공급파트너만의 시각을 검증했기 때문에 해석에서 유의할 필요가 있다. 또한 타당성확보 노력을 기하였지만 측정도구 면에서 엄격한 개발과정을 준수하지는 못했다. 향후에는 모바일 컨텐츠 파트너의 기업의 특성을 조사하여 관계성 변수와의

• Journal of Technologic Dentistry
• /
• v.41 no.1
• /
• pp.21-27
• /
• 2019

Purpose: To evaluate 2D and 3D of occulsal, mesial-occlusal and mesial-occlusal-distal cavity of composite resin inlay. Methods: Abutment tooth 16, 36 of FDI system was selected for the study. Inlay prostheses classified as occlusal cavity (OC group), mesial-occlusal (MOC) and mesial-occlusal-distal cavity (MODC) were prepared using composite resin. Composite resin was injected with composite resin in prepared tooth cavity and then photopolymerized with UV light. Additional thermal polymerization was performed. Marginal gap of composite resin inlays were measured by digital microscope(x160) with silicone replica technique. The data was analyzed from statistical software for Kruskal-Wallis test (${\alpha}=0.05$). 3-dimensional analysis was analyzed through superimposition method. Results: The smallest 2D marginal fit measure of the three groups was $47.0{\pm}21.6{\mu}m$ in the MOC group. The largest 2D marginal was $69.1{\pm}33.8{\mu}m$ in the MODC group. In the trueness of the three groups, the most accurate figure was $14.4{\pm}2.3{\mu}m$ for the MODC group. In Precision, the most accurate figure was $14.5{\pm}4.3{\mu}m$ for the MODC group. Conclusion : In this study, 2D marginal fit of OC, MOC, and MODC cavities fabricated with composite resin was applicable to all clinical applications. In the 3D inner surface accuracy evaluation, the MODC group showed the accuracy results.

• Conservation Science in Museum
• /
• v.25
• /
• pp.1-8
• /
• 2021

This study investigated White Porcelain Water Dropper with Openwork Lotus Scroll Design and Eight Trigram Design in Cobalt-blue Underglaze (hereinafter, the "water dropper") in the collection of the National Museum of Korea using computed tomography (CT). A replica was produced to examine both the structure and its original production method. The CT scanning identified no joint lines or pores in the clay, which suggests that the body (the lower part of the water dropper) was shaped in a single piece using a mold and was then matched with a mold-formed lid (the upper part of the water dropper). The inner container of the body portion was roughly trimmed with a bamboo knife so that its upper surface could be securely attached to the bottom of the lid and prevent any leakage in the joined surface. It appears that the inner container for storing water was made first in a cylindrical shape that met the unit of quantity used at the time and could be easily formed by molding. It was transformed into a trapezoid shape during the process of combining it with the lid. A cylindrical inner container was reproduced using silicon 3D printing to compare its capacity with that of the original inner container. The comparison revealed that the reproduced container had a capacity of 152.5㎖, whereas the original container holds approximately 168.6㎖, a figure similar to three hop (around 174㎖) in Joseon-period units of quantity. Since the capacity of the cylindrical inner container corresponds to a known measure from the late Joseon dynasty, it is likely that the water dropper was originally produced to contain a cylindrical inner container.

• The Journal of Engineering Geology
• /
• v.31 no.4
• /
• pp.561-577
• /
• 2021

The ten standard roughness profiles suggested by Barton and Choubey (1977) were extended to make three-dimensional (3D) joint models whose profiles were identical at any cross section. Replicas of joint models were produced using plaster of Paris, and direct shear tests were performed to verify the joint roughness coefficients (JRC) of the standard roughness profiles. Joint shear strengths measured by direct shear tests were compared with those predicted by the shear failure criterion suggested by Barton (1973) based on JRC, joint compressive strength (JCS), and joint basic friction angle (𝜙_b). Shear strengths measured from joints of the first and fourth standard roughness profiles were close to predicted values; however, shear strengths measured from the other joint models were lower than predicted, the differences increasing as the roughness of joints increased. Back calculated values for JRC, JCS, and from the results of the direct shear tests show measured shear strengths were lower than predicted shear strengths because of the JRC values. New JRC were back calculated from the measured shear strength and named JRC_m. Values of JRC_m were lower than the JRC for the standard roughness profiles but show a strong linear relationship to JRC. Corrected JRC_m values for the standard roughness profiles are provided and revised relationships between JRC_m and JRC, and new shear strength criterion are suggested.

• Science of Emotion and Sensibility
• /
• v.24 no.4
• /
• pp.17-28
• /
• 2021

The purpose of the research was to examine the effect of field of view on egocentric distance perception in the real and virtual environment. The replica that mimicked the real environment condition was used to create the virtual environment condition. We manipulated field of view levels equally in both viewing conditions using glasses that limit the field of view in real-world conditions and limiting the field of view in virtual-world conditions in a manner equivalent to real-world conditions via HMD. Eighteen participants observed the target with a limited field of view in a real and virtual environment without head movement. Then, we measured perceived distance using the timed imagined walking method, which measures the time taken by each participant to mentally walk to the target. The target was shown three times at three different distances from the participants: 3, 4, and 5 m. For the analysis, we converted time estimates into distance estimates. Consequently, the estimated distance in the virtual environment condition was less than the estimated distance in the real environment condition. And as the field of view shrank, the estimated distance also decreased. The estimated distance did not vary with field of view levels in real-world conditions. In the virtual environment, the estimated distance decreased as the field of view decreased, whereas in the real environment, the estimated distance increased. The implications of the results and some future research directions are discussed below.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.1210-1210
• /
• 2001

On farm analysis of protein, moisture and oil in cereals and oil seeds is quickly being adopted by Australian farmers. The benefits of being able to measure protein and oil in grains and oil seeds are several : $\square$ Optimize crop payments $\square$ Monitor effects of fertilization $\square$ Blend on farm to meet market requirements $\square$ Off farm marketing - sell crop with load by load analysis However farmers are not NIR spectroscopists and the process of calibrating instruments has to the duty of the supplier. With the potential number of On Farm analyser being in the thousands, then the task of calibrating each instrument would be impossible, let alone the problems encountered with updating calibrations from season to season. As such, NIR technology Australia has developed a mechanism for \ulcorner\ulcorner\ulcorner their range of Cropscan 2000G NIR analysers so that a single calibration can be transferred from the master instrument to every slave instrument. Whole grain analysis has been developed over the last 10 years using Near Infrared Transmission through a sample of grain with a pathlength varying from 5-30mm. A continuous spectrum from 800-1100nm is the optimal wavelength coverage fro these applications and a grating based spectrophotometer has proven to provide the best means of producing this spectrum. The most important aspect of standardizing NIB instruments is to duplicate the spectral information. The task is to align spectrum from the slave instruments to the master instrument in terms of wavelength positioning and then to adjust the spectral response at each wavelength in order that the slave instruments mimic the master instrument. The Cropscan 2000G and 2000B Whole Grain Analyser use flat field spectrographs to produce a spectrum from 720-1100nm and a silicon photodiode array detector to collect the spectrum at approximately 10nm intervals. The concave holographic gratings used in the flat field spectrographs are produced by a process of photo lithography. As such each grating is an exact replica of the original. To align wavelengths in these instruments, NIR wheat sample scanned on the master and the slave instruments provides three check points in the spectrum to make a more exact alignment. Once the wavelengths are matched then many samples of wheat, approximately 10, exhibiting absorbances from 2 to 4.5 Abu, are scanned on the master and then on each slave. Using a simple linear regression technique, a slope and bias adjustment is made for each pixel of the detector. This process corrects the spectral response at each wavelength so that the slave instruments produce the same spectra as the master instrument. It is important to use as broad a range of absorbances in the samples so that a good slope and bias estimate can be calculated. These Slope and Bias (S'||'&'||'B) factors are then downloaded into the slave instruments. Calibrations developed on the master instrument can then be downloaded onto the slave instruments and perform similarly to the master instrument. The data shown in this paper illustrates the process of calculating these S'||'&'||'B factors and the transfer of calibrations for wheat, barley and sorghum between several instruments.

• Journal of Internet of Things and Convergence
• /
• v.9 no.3
• /
• pp.69-74
• /
• 2023

Smart museums based on the growth of online exhibition can be seen as in line with the movement of the 4th Industrial Revolution. By combining art and technologies, they enable viewers to experience culture and art. This study examined the cases of the Dunhuang Museum, the Palace Museum, and the China Arts and Crafts Master Museum to assess or identify how China is leading by accepting the technology of the fourth industry and applying the technology. In common, Chinese smart museums are widely used for collecting enviromental data, establishing integrated digital applications, and preserving collections, services, management, and exhibitions through VR, and AR. Through the case of the Chinese Smart Museum, this study identified the online exhibition as a space that exists in another dimension rather than an image replica with excellent operational utility. Therefore, online exhibitions are the best medium to expand the space, and viewers can explorethe museum's exhibition room and engage with all the contents of the museum without visiting the museum in person. Through the online exhibition of smart museums, visitors and viewers can be transformed into more active cultural consumers and develop collective capabilities.

• The Journal of Advanced Prosthodontics
• /
• v.15 no.3
• /
• pp.155-170
• /
• 2023

PURPOSE. This study aims to clinically compare the fitness and trueness of zirconia crowns fabricated by different combinations of open CAD-CAM systems. MATERIALS AND METHODS. Total of 40 patients were enrolled in this study, and 9 different zirconia crowns were prepared per patient. Each crown was made through the cross-application of 3 different design software (EZIS VR, 3Shape Dental System, Exocad) with 3 different processing devices (Aegis HM, Trione Z, Motion 2). The marginal gap, absolute marginal discrepancy, internal gap(axial, line angle, occlusal) by a silicone replica technique were measured to compare the fit of the crown. The scanned inner and outer surfaces of the crowns were compared to CAD data using 3D metrology software to evaluate trueness. RESULTS. There were significant differences in the marginal gap, absolute marginal discrepancy, axial and line angle internal gap among the groups (P < .05) in the comparison of fit. There was no statistically significant difference among the groups in terms of occlusal internal gap. The trueness ranged from 36.19 to 43.78 ㎛ but there was no statistically significant difference within the groups (P > .05). CONCLUSION. All 9 groups showed clinically acceptable level of marginal gaps ranging from 74.26 to 112.20 ㎛ in terms of fit comparison. In the comparison of trueness, no significant difference within each group was spotted. Within the limitation of this study, open CAD-CAM systems used in this study can be assembled properly to fabricate zirconia crown.

• Journal of Korean Society of Forest Science
• /
• v.66 no.1
• /
• pp.82-94
• /
• 1984

The variation of stomatal density and stomatal length of four species of oaks was studied for the purpose of examining the differences among populations and among individual trees within population. Nine populations of Quercus mongolica, four populations of Q. serrata and Q. variabilis respectively, and three populations of Q. acutissima were selected in the natural stands of oaks distributed through the whole country. Twelve leaves were sampled from each of 20 trees from each population. The length of 20 stomata and ten replications of stomatal density were measured from collodion replicas of each leaf under a microscope. Average stomatal densities and lengths ranged through $600-1000/mm^2$ and $19-26{\mu}m$ respectively in all of the species studied. The stomatal densities and lengths presented significant differences statistically at the level of 1 or 5% among populations and among individual trees within population in all the species. Quercus mongolica, especially, showed large variation among populations, while Q. variabilis did very narrow variation compared to the other species. The coefficients of variation of stomatal densities and lengths among individual trees within population exhibited small values of 3.7-12.0% and 1.4-5.3% respectively in all the populations of the species. The average stomatal densities of Q. mongolica showed statistically significant correlation of multiple correlation coefficient of $R_{df{\cdot}2.6}=0.868^*$ and multiple regression equation of $Y=0.041X_1(G.M.T.S.)+0.489X_2(G.M.H.S.)+22.37$ with the sum of growing season mean daily temperature and the sum of growing season mean daily humidity of the stand studied. However the average stomatal lengths showed no relation with the same meteological variables. The figures of frequency distribution of the measurements of leaves or the mean values of individual trees did not show normal distribution curves in some populations. The curves, as well as the results of ANOVA, exhibited the differences among populations.

• Journal of Nutrition and Health
• /
• v.42 no.6
• /
• pp.516-522
• /
• 2009

In this study, the effects of a mixture consisting of vitamin E, vitamin C, pycnogenol and evening primrose oil (mixture LGNC-5) on ultraviolet light (UV) induced pigmentation and wrinkle reductions of normal healthy volunteers were studied. In a double-blind placebo-controlled study, each of 54 subjects took daily either 4 capsules of the mixture LGNC-5 (Group ABC; 282.5 mg/capsule) or placebo (Group Ganada). We irradiated 2.5 MED UV on the upper arms and measured the whitening effect by colorimeter-based L value. The level of wrinkle reduction was determined by image analysis using skin replica around the crow' feet, and the level of serum vitamin E was determined at baseline and 12 weeks. After 12-week oral administration, the treated group showed a significant reduction in skin pigmentation and wrinkles compared with the placebo group (p = 0.011 and p = 0.000005, respectively). Also, the level of serum vitamin E was significantly increased in the treated group after 12-week oral adminstration of the mixture compared with that in the placebo group (p = 0.0001). In conclusion, 12-week oral administration of LGNC-5 as a dietary supplement could be effective to reduce both UV induced pigmentation and skin wrinkle without side effects.