• Journal of IKEEE
• /
• v.3 no.2 s.5
• /
• pp.268-275
• /
• 1999

In this paper, a new type of linearization technique proposed, in which the predistortor was added to the feedforward linearizer. As the input power level is applied to HPA, the gain and phase characteristics of the amplifier are also varied. By using of the predistorter the amplitude imbalance and phase imbalance is kept constant. Experimental results are present for Korea PCS frequency band. The center frequency of the feedforward amplifier is 1.843.75 MHz with 1.23 MHz bandwidth. The 2-tone intermodulation distortion at 37dBm output power is about -50dBc, and spurious emission are -46dBc at $fc{\pm}\;885KHz\;and\;-52dBc\;at\;fc\;{\pm}1.98MHz$, respectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.291-296
• /
• 2012

In this Paper, we propose a multi-hop transmission in cognitive underlay network. In Secondary network, We assume that a secondary source S attempts to transmit D its signal to a secondary destination via N+1 hops with help of N relays $R_1$, $R_2$, ${\ldots}$, $R_N$. At hop k between relay $R_k$ and relay $R_{k+1}$. we assume that there is a primary user $PU_k$. In this paper, we assume that these channels are Rayleigh fading channels. In underlay network, the secondary transmitter has to adapt its power so that the interference caused at the primary user is less than a maximum interference threshold. considering the hop transmission between the transmitter and the repeater, we find transmit power and signal-to-noise ratio(SNR). Between the transmitter from the receiver depending on the number of relay in the underlay network, we compared to find the transmit power and signal-to-noise ratio(SNR). Finally we find optimal number of relay and optimal threshold value.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.3 s.333
• /
• pp.1-8
• /
• 2005

In this paper, design and implement 60W Doherty power amplifiers for 3GPP repeater and base station transceiver system. Efficiency improvement and high power property of Doherty power amplifier is distinguishable; however implementation of assistance amplifer is difficult, though. To solve the problem, therefore, GCHD (Gate Control Hybrid Doherty) power amplifier is embodied to gate bias adjusament circuit of assistance amplifier to General Doherty power amplifier. Experiment result shows that $2.11\~2.17GHz$, 3GPP operating frequency band, with 62.55 dB gain, PEP output is 50,76 dBm, W-CDMA average power is 47.81 dBm, and -40.05 dBc ACLR characteristic in 5MHz offset frequency band. Each of the parameter satisfied amplifier specification which we want to design. Especially, GCHD power amplifier shows proper efficiency performance improvement in uniformity ACLR than general power amplifier.

• Journal of the Microelectronics and Packaging Society
• /
• v.12 no.4 s.37
• /
• pp.323-330
• /
• 2005

We fabricate PIN PD (Positive Intrinsic Negative Photo-Diode) for CWDM optical repeater and optical transmission system, and analyze theoretically the characteristics to verify the capability of device fabricated. Furthermore, we integrate CWDM filter into PD package to enhance the cost and the performance when compared to the conventional system, in which CWDM filter and PD package are linked by optical fusion splicing. The integrated CWDM PD is fabricated by three steps as follows: CWDM filter design, PD packaging, and product assembly and test. The results of measurement for PD fabricated reveal 0.5 dB bandwidth of 17 nm, isolation over 60 dB at transmission port and over 20 dB at reflection port. Also, the IMD3 for wireless communication is over 63 dBc, and the responsivity of PD presents over 0.9 A/W for 20 samples of the total 23 PD. The total insertion loss reduces about 0.4${\~}$0.7 dB due to the integrated assembly of CWDM and PD.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.121-127
• /
• 2016

Satellite communication is a communication method using a satellite as a repeater communication on the air and have a communication range is wide and is possible to transmit high-speed data, so Satellite communication has been highlighted as the next generation communication. However, because the distance between the ground and the satellite is far away, there is a disadvantage that propagation delay time is very long and packet is damaged. Therefore, this study was applied to Link Relay H-ARQ system in order to complement the damage to the packet. Furthermore, we propose the Modified Link Relay H-ARQ scheme is a new scheme to supplementation the delay time. By applying the Markov channel for implementing a channel of satellite communications, the results of analyzing the performance, when applying the Link Relay HARQ scheme, BER and PER performance was improved, when applying the Modified Link Relay H-ARQ scheme, Throughput performance was confirmed improvement.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.11
• /
• pp.1095-1103
• /
• 2014

WBAN has received great attention recently due to its versatile applicability. In this paper, antennas suitable for WBAN communication depending on the locations of mobile devices and the manufacturing of a human equivalent phantom are introduced. The effect of the body on the communication performance is largely dependent on the locations of devices. Specifically, the radiation and return loss characteristics of the antenna are greatly influenced by the characteristics of a medium existing in the near-field of an antenna. Thus, the proper WBAN antenna design is important in establishing a successful communication link between the transceivers. To consider the effect of the body on the antenna performance, the human equivalent phantom is also important factor in the WBAN antenna design and measurement. In introduction, categorization of the WBAN communication channel is introduced and antenna characteristics required for each communication channel are described. In the main subject section, several WBAN antenna design examples along with the implementation of the human equivalent phantom are discussed. In conclusion, the factors, which have to be considered in the design process, and future research are mentioned.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.5
• /
• pp.552-559
• /
• 2011

In this paper, the frequency reconfigurable antenna is proposed and designed. The proposed antenna is designed using the vertically stacked dipole structures and have the operating band for Cellular, PCS/WCDMA/Wibro/WiFi and WiMAX. The operating frequency band is selected by three pair of PIN diodes using the voltage difference between each dipole antenna and feeding transmission lines. The proposed antenna meets the required operating bandwidth and the maximum gain for each frequency band are measured as 6.3 dBi, 5.4 dBi and 5.8 dBi, respectively. The proposed antenna in this paper can be applied for the future mobile small base station or repeater antenna because this antenna can provide the small size and high gain features.

• Journal of Broadcast Engineering
• /
• v.13 no.3
• /
• pp.350-364
• /
• 2008

Single frequency network (SFN) design based on the Advanced Television Systems Committee (ATSC) specification, a terrestrial digital television (DTV) system, normally causes a interference problem, among signals from multiple transmitters or repeaters. To solve this, the ATSC recommended practice (RP) introduces a transmitter identification (TxID) signal embedded in a signal from each transmitter or repeater. A TxID signal analyzer is then used to detect the TxID signal, and following the analysis results, a SFN design can be adjusted. This paper discusses the generation and usages of Kasami sequence, is used the TxID signal. The configuration of the TxID signal analyzer to efficiently detect TxID signal is proposed and the results of theoretical performance analysis are provided. Moreover, computer simulation and laboratory test results are provided to evaluate the performance of TxID signal analyzer and the theoretical performance analysis.

• Tunnel and Underground Space
• /
• v.29 no.6
• /
• pp.367-378
• /
• 2019

As the development of IT technology, the way to manage the underground construction site in real time using wireless network communication is being considered. Underground space is limited area compared to the ground site due to the enclosed communication environment and spatial characteristics. BMN (Bluetooth Mesh Networking) technology is a recently introduced wireless communication technology that bluetooth device acts as a repeater to form a networking mesh and monitor individual devices. This article examines the areas to be considered for analyzing the applicability of BMN technology to underground spaces, and the cases studies of wireless communication monitoring systems currently being developed. And the BMN technology which is being developed for the underground application is also introduced.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.6
• /
• pp.920-928
• /
• 2000

In this paper, using newly proposed size reduction technique, the aperture coupled microstrip patch antenna for a repeater system in a mobile communication cellular band (824~849 MHz) is developed with a wide bandwidth, small size, light weight, and low cost. The resonant frequency of microstrip antennas is related to the electric field distribution of the radiating patch. The field strength of $TM_{01}$ mode of a rectangular patch antenna is strongest at each of the extremities of the radiating patch, but negligible at center. Therefore, the size of a patch antenna can be effectively minimized by inserting the narrow rectangular dielectric into just under the edges of the resonant Patch. This Paper also proposes the bandwidth improvement technique by using under-coupling technique with a tuning stub. The VSWR is less than 1.5 : 1 for the whole cellular band. The simulation tool was HFSS, Agilent Technologies, Inc.