A Study on the Design of Power Amplifier for the Repeater using Code Division Multiple Access

CDMA방식 중계기용 전력증폭기의 설계에 관한 연구

  • 김한석 (건국대학교 전자공학과) ;
  • 김훈용 (건국대학교 전자공학과) ;
  • 김대중 (건국대학교 전자공학과) ;
  • 이종악 (건국대학교 전자공학과)
  • Published : 1999.12.01

Abstract

In this paper, a new type of linearization technique proposed, in which the predistortor was added to the feedforward linearizer. As the input power level is applied to HPA, the gain and phase characteristics of the amplifier are also varied. By using of the predistorter the amplitude imbalance and phase imbalance is kept constant. Experimental results are present for Korea PCS frequency band. The center frequency of the feedforward amplifier is 1.843.75 MHz with 1.23 MHz bandwidth. The 2-tone intermodulation distortion at 37dBm output power is about -50dBc, and spurious emission are -46dBc at $fc{\pm}\;885KHz\;and\;-52dBc\;at\;fc\;{\pm}1.98MHz$, respectively.

본 논문에서는 CDMA 방식 중계기용 전력증폭기의 선형특성을 향상시키기 위해 기존의 전치왜곡 방식과 전방귀환 방식을 혼합한 전력증폭기를 설계 제작하였다. CDMA방식의 이동통신 시스템은 기존의 아날로그 셀룰라 방식과는 사용 스펙트럼 대역폭이 훨씬 크며 증폭기의 비선형성에 의한 채널사이의 혼변조 왜곡을 충분히 제거하여야만 통신이 가능하기에 선형성이 우수한 전력증특기가 필수적으로 요구된다. 본 논문에서 제작한 전력증폭기는 37dBm, 2-tone 인가시의 IMD 특성이 -50dBc로써 나타났으며, 불요방사 특성도 IS-95 기준을 만족하는 $fc{\pm}\;885kHz$에서 약 -46dBc, $fc{\pm}\;1.98MHz $ 에서는 약 -52dBc로 나타났다.

Keywords

References

  1. Feedforward linear power amplifier Pothecary, N.
  2. IEEE Comunication magazine no.Sept. UMTS/IMT-2000 Based on Wideband CDMA Dahlman, E.(et al.)
  3. IEEE Trans. Microwave Theory Tech. v.MTT-27 no.May Third-order Intermodulation Distortion and Gain Compression in GaAs FET Tucker, R.S.
  4. ICC'80 Conf. Rec. v.2 no.June Predistortion nonlinear compensator formicrowave SSB-AM system Nojima, T.;Okamoto, Y.
  5. IEEE Trans. on Vehi. Tech. v.43 no.2 Adaptive Linearization Using Predistortion-Experimental Results Faulkner, M.;Johanson, M.
  6. 24th european microwave conference 94 High efficiency feedforward linearizers Mickson, M.T.
  7. Bell Syst. Tech. J. v.50 A Microwave feedforward experiment Seidel, H.
  8. Microwave Solid State Circuit Design Bahl, Inder;Bhartla, Prakash