• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.47-48
• /
• 2023

Reinforced concrete structures are an integrated structure in which reinforcing bars are placed on the tensile side of the beam to compensate for concrete that is strong in compression but weak in tension, so that the concrete receives compressive force and the reinforcing bars receive tensile force. It is durable, fire-resistant, economical, and adapts to the shape and dimensions of the structure. It has been widely used for a long time because it can be made freely without restrictions. However, reinforced concrete structures have the disadvantage that cracks occur easily, so they are repaired using a cross-sectional construction method. During this process, problems such as the repair part falling off occurred, so in order to solve the problem, stress changes due to changes in the size of the repair part were examined. As a result, based on the elastic modulus ratio of 1.0, the stress tended to increase as the size of the repair part decreased when it was less than 1.0, and the opposite tendency was seen when it was more than 1.0. This is believed to be due to an increase in the area of the part with a large elastic modulus.

• Journal of Chest Surgery
• /
• v.24 no.9
• /
• pp.913-917
• /
• 1991

Ventricular septal defect complicating myocardial infarction is rare but fatal condition which requires early surgical intervention before end-organ failure ensues from cardiogenic shock. Since the first successful repair by Cooley et al in 1956, surgical skills and strategies were developed and modified to a great extent, and we adopted the new repair technique in our case which stresses that minimal or no part of the infarcted septum and left ventricular wall be resected. This technique obviates the need to resect the infarcted part of the septum and prevents recurrence of an even larger VSD, and provides adequate size and shape of the left ventricle after of transinfarction left ventriculotomy.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1417-1424
• /
• 2010

To provide more safe road and better travelling service for Expressway customer, we minimize settlement of bridge backfill and properly repair the occurred settlement. So, we devide this study to two parts one is construction part and the other is management part, in construction part we remove settlement occuring elements and in management part we grasp proper repair time, and then we produce general settlement management program. In construction part, for the purpose of developing construction method of reducing settlement, we developed construction method models and they are composed of abutment back section alteration and backfill material alteration by literature reviews and site investigation of backfill settlement. And then, we carried out laboratory model test and full size field test of some developed models.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.1 no.1
• /
• pp.107-112
• /
• 1997

A series of reinforced concrete beams was tested to evaluate the flexural performance of the repaired RC beams. The key parameters for this study were the size and location of the patch, and the repair materials, including polymer, polymer-cementitious and cementitious materials. The repaired specimens failed by a typical flexural mode with minor interfacial bond failure. Beams repaired with polymer, polymer-cementitious and cementitious materials recover 100%, 91%, and 97% of the flexural strength respectively, while beams with cement mortar lose approximately 30% of the strength. Compared with the pressure injection techniques the specimens repaired with patching techniques show low flexural strength, with significant interfacial bond failure. Location and size of the repaired part do not affect the recovering performance. Interfacial behavior between repair and strengthening materials is the major influencing factor for the composite structures.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.104-107
• /
• 2002

Direct Metal Manufacturing (DMM) is a new additive process that aims to take die making and metalworking in an entirely new direction. It is the blending of five common technologies : lasers, computer-aided design (CAD), computer-aided manufacturing (CAM), sensors and powder metallurgy. The resulting process creates parts by focusing an industrial laser beam onto a tool-steel work piece or platform to create a molten pool of metal. A small stream of powdered tool-steel metal is then injected into the melt pool to increase the size of the molten pool. By moving the laser beam back and forth, under CNC control, and tracing out a pattern determined by a computerized CAD design, the solid metal part is built line-by-line, one layer at a time. DMM produces improved material properties in less time and at a lower cast than is possible with traditional fabrication.

• Clinics in Shoulder and Elbow
• /
• v.11 no.2
• /
• pp.96-103
• /
• 2008

Purpose: This study investigated the rate of retear and related factors after arthroscopic repair of rotator cuff tears involving more than one tendon. Materials & Methods: Arthroscopic repair of 22 rotator cuff tears (average size 3.2cm: average age 58 years old) involving the supraspinatus and part or all of the infraspinatus were investigated using MRI on average 10 months after repair. The status of the repaired cuff was investigated using Sugaya's classification, and the change in muscle was evaluated with Goutallier's classification. Results: Retear (Sugaya grade IV, V) was found in 7cases(32%). Tears larger than 3cm had a higher retear rate(67%) than smaller tears(8%). Retear cases had Goutallier grade II or higher muscle changes preoperatively and showed aggravation of muscle atrophy postoperatively. Even without retear, reversal of muscle change was not seen Conclusion: Rotator cuff tears not confined to the supraspinatus had a 32% retear rate after arthroscopic repair. The size of the tear was the most crucial factor influencing retear. Retear was frequent in tear over 3cm. Atrophy of the cuff muscle worsened when the repair failed but did not improve even without retear.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.5
• /
• pp.1999-2002
• /
• 2012

Background: DNA polymerase is a single-copy gene that is considered to be part of the DNA repair machinery in mammalian cells. The encoded enzyme is a key to the base excision repair (BER) pathway. It is evident that pol beta has mutations in various cancer samples, but little is known about ovarian cancer. Aim: Identification of any variant form of $pol{\beta}$ cDNA in ovarian carcinoma and determination of association between the polymorphism and ovarian cancer risk in Indian patients. We used 152 samples to isolate and perform RT-PCR and sequencing. Results: A variant of polymerase beta (deletion of exon 4-6 and 11-13, comprising of amino acid 63-123, and 208-304) is detected in heterozygous condition. The product size of this variant is 532 bp while wild type pol beta is 1 kb. Our study of association between the variant and the endometrioid type shows that it is a statistically significant factor for ovarian cancer [OR=31.9 (4.12-246.25) with p<0.001]. The association between variant and stage IV patients further indicated risk (${\chi}^2$ value of 29.7, and OR value 6.77 with 95% CI values 3.3-13.86). The correlation study also confirms the association data (Pearson correlation values for variant/stage IV and variant/endometrioid of 0.44 and 0.39). Conclusion: Individuals from this part of India with this type of variant may be at risk of stage IV, endometrioid type ovarian carcinoma.

• Fashion & Textile Research Journal
• /
• v.15 no.1
• /
• pp.116-129
• /
• 2013

This research analyzes the status of clothes purchase and the size fit of the clothes for kindergarten children in the Daegu city area. The total of 344 questionnaires were analyzed. The summary and the conclusion are as follows: First, the frequency of accompanying children when purchasing appeared mostly 'sometimes accompany'. Second, the parents appeared 'sometimes reflect children's opinions'. Third, the main information source was 'store display'. The main place of purchase was large discount stores, internet home-shopping, and department stores (respectively) with significant differences in the age of the parent(p<.05) and monthly incomes(p<.001). In the clothes size selection, 72.1% of the parents selected 'one size larger' at time purchase and showed asignificant difference by monthly income. Repair-experience after purchase appeared in 31.4% of the samples because of the inadequate length and width of the clothes. The unfit clothes parts were in the order of pant length, sleeve length, waist part, jacket length, pant width, hip part, and crotch, which showed a significant difference in children based on gender. The salient purchasing point for child clothing was in the order of 'size fit', 'color and pattern', 'design' and 'convenience in action'. It is important to consider that kindergarten children need adequate size for growing and convenient pattern designs (that include materials at stretching parts) for positive acting because they are in a period of frequent activity and growth.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.14-15
• /
• 2021

Recently, the size of tiles used for bathroom walls in apartment houses is gradually increasing in size. The problem is that when these large-sized tiles are attached by the sticking method, due to the nature of the method, there is a concern about the stability of the attachment to the part (pupil) where the tile and the adhesive are not attached. The problem is serious as it leads to lawsuits in the outbreak court. In addition, it is urgent to verify the adhesion stability of the sticking method because secondary damage occurs due to a safety accident caused by the falling of the tile. Ministry of Land, Infrastructure and Transport [Investigation of defects in apartment houses, calculation of repair cost and defect determination criteria] ① The tile adhesion strength is 0.39N/mm² or more and ② It is specified to fill 80% or more of the base area of the tile backside, but this is currently trendy. It is considered that large-sized tiles need to be verified from multiple angles, and as part of that, we intend to verify the adhesion stability according to the area to be attached to large-sized tiles.

• Anatomy and Cell Biology
• /
• v.56 no.3
• /
• pp.382-393
• /
• 2023

Cell clusters are a histological hallmark feature of intervertebral disc degeneration. Clusters arise from cell proliferation, are associated with replicative senescence, and remain metabolically, but their precise role in various stages of disc degeneration remain obscure. The aim of this study was therefore to investigate small, medium, and large size cell-clusters. For this purpose, human disc samples were collected from 55 subjects, aged 37-72 years, 21 patients had disc herniation, 10 had degenerated non-herniated discs, and 9 had degenerative scoliosis with spinal curvature <45°. 15 non-degenerated control discs were from cadavers. Clusters and matrix changes were investigated with histology, immunohistochemistry, and Sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE). Data obtained were analyzed with spearman rank correlation and ANOVA. Results revealed, small and medium-sized clusters were positive for cell proliferation markers Ki-67 and proliferating cell nuclear antigen (PCNA) in control and slightly degenerated human discs, while large cell clusters were typically more abundant in severely degenerated and herniated discs. Large clusters associated with matrix fissures, proteoglycan loss, matrix metalloproteinase-1 (MMP-1), and Caspase-3. Spatial association findings were reconfirmed with SDS-PAGE that showed presence to these target markers based on its molecular weight. Controls, slightly degenerated discs showed smaller clusters, less proteoglycan loss, MMP-1, and Caspase-3. In conclusion, cell clusters in the early stages of degeneration could be indicative of repair, however sustained loading increases large cell clusters especially around microscopic fissures that accelerates inflammatory catabolism and alters cellular metabolism, thus attempted repair process initiated by cell clusters fails and is aborted at least in part via apoptosis.