• 제목/요약/키워드: removal ability

검색결과 500건 처리시간 0.03초

Mixed matrix membranes for dye removal

  • Evrim Celik-Madenli;Dilara Kesiktas
    • Membrane and Water Treatment
    • /
    • 제14권4호
    • /
    • pp.175-180
    • /
    • 2023
  • Mixed matrix membranes (MMMs) can be a promising alternative for the solution of dye removal from coloured effluents. Polymeric membranes are widely used due to their good film-forming ability, flexibility, separation properties, and cost. However, they have low mechanical, chemical, and thermal resistances. Moreover, the fouling of polymeric membranes is high because of their hydrophobic nature. Hence, there is an increasing interest in organic-inorganic hybrid membranes as a new-generation membrane material. It has been shown that carbon nanotubes have the potential to increase the material properties of polymers with their low density, high strength, hardness, and exceptional aspect ratio. In this work, carbon nanotubes blended MMMs were prepared and methyl orange removal efficiency of them was investigated. Compared to the bare membranes, MMMs showed not only increased hydrophilicity, water content, and pure water flux but also increased methyl orange rejection and flux recovery

목질 및 수피탄화물에 의한 기상 유해가스 흡착제거 (Removal of Harmful Gas with Wood or Bark Charcoal)

  • 조태수
    • Journal of the Korean Wood Science and Technology
    • /
    • 제36권6호
    • /
    • pp.69-76
    • /
    • 2008
  • 탄화온도별로 제조한 신갈나무(Quercus mongolica Fischer)목탄과 낙엽송(Larix leptoepis)수피탄에 의한 유해가스 흡착성능 평가를 하여 본 결과, 탄화온도가 증가하면 비표면적과 탄소함량이 증가하는 경향이 있으나, $600^{\circ}C$이상의 온도에서는 상승폭이 둔화하였다. 또한 신갈나무탄과 낙엽송수피탄에 의한 유해가스 제거율 차이는 뚜렷하지는 않았으나, 탄화온도는 가스흡착성능에 큰 영향을 주는 것으로 나타났다. 즉, $300^{\circ}C$에서 탄화한 저온 목질탄화물은 목탄 또는 수피탄의 종류에 관계없이 50% 이하의 매우 낮은 악취가스 및 VOC 물질 제거율을 나타낸 반면, $600^{\circ}C$이상의 고온 탄화물은 목질의 종류에 관계없이 악취물질인 트리메틸아민, 메틸메르캅탄, 황화수소의 제거율과 VOC물질인 벤젠, 톨루엔, 자일렌 제거율이 거의 100%를 나타낼 정도로 높았으며, 흡착 10분 이내에 흡착평형에 이를 정도로 빠른 흡착성을 나타내었다. 한편 아세틸렌이나 $SO_2$, $NO_2$ 가스 제거율은 고온탄화물이라도 흡착 4시간 후인 흡착평형이 이루어지더라도 40% 이하로 매우 낮아 가스 종류에 따라서 흡착거동에 차이가 있었다. 이와 같이 탄화온도와 가스 종류에 따라 흡착성능이 달라지는 것은 비표면적과 같은 물리적인 요인뿐만 아니라 목탄의 관능기 종류 및 양에 의한 화학적 변화가 영향을 미치는 것으로 판단되며, 화학적 요인에 대한 구명이 필요할 것으로 생각된다.

광촉매도료의 NOx제거 특성에 대한 실험 연구 (An Experimental Study on the NOx Removal Properties of photocatalystic paint)

  • 박준영;김현우;정봉원;최영준;김용현;김화중
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2001년도 가을 학술발표회 논문집
    • /
    • pp.1123-1128
    • /
    • 2001
  • In this study, As a plan of essential solution for out-door air pollution, a basic study was carried out to develop a paint with photocatalystic $TiO_{2}$ which can eliminate the $NO_{X}$ from atmosphere. A series of Experiment were carried out according to kind of binder, photocatalyst, light source. Through Experiment of out-door exposure test, the endurance ability and NOx removal efficiency of the specimen were evaluated.

  • PDF

Assessment of Bacteria Removal Using Silver Ion Absorbed Ceramic Filter

  • Kim, Woo-Hang;Smith, James
    • 한국환경과학회지
    • /
    • 제21권8호
    • /
    • pp.901-907
    • /
    • 2012
  • The objective of this study was to evaluate bacteria removal ability of the metallic silver which was baked silver ion impregnated ceramic filter at heating condition. Silver leaking from baked ceramic filter was tested to sustain bacteria removal for a long time. Silver impregnated ceramic filter could remove E. coli completely at $10^{12}$ MPN/100ml to $10^{13}$ MPN/100ml of influent. However, ceramic filter without silver did not remove E. coli completely under the same condition. After baking, the silver impregnated ceramic filter almost didn't leak out the silver ion from filter. Photo of TEM (Transmission Electron Microscopy) showed that absorbed silver ions remained in ceramic filter after baking process and most of silver were less than 10 nm. According to the increase in the amount of silver in the ceramic filter, removal efficiencies of E. coli were increased but turbidity removal was decreased. It can be accounted that increased removal efficiency of E. coli was from disinfection of silver that is in the ceramic filter. Simulated concentrations of bacteria agree well with the observed experimental effluent concentration data. Moreover, first-order decay coefficients increased to 0.0034/min after silver was added in the ceramic filter. Increase of first-order decay coefficient proves that silver-added ceramic filter can remove bacteria easily.

정수처리에서 제올라이트 여과를 이용한 암모니아성질소의 제거와 재생 (Ammonium Ion Removal and Regeneration for Zeolite Filtration in Drinking Water Treatment)

  • 김우향;이승희
    • 한국환경과학회지
    • /
    • 제13권7호
    • /
    • pp.661-665
    • /
    • 2004
  • As the concentration of ammonium nitrogen could be reached 2~3 mg/L in the winter in the river. It was clear that the excessive concentration of chlorinated organics could be produced with the increase of chlorine addition to remove ammonium nitrogen. In the innovative ammonium nitrogen removal process, zeolite adsorption is very efficient as substitute for rapid sand filtration without other adverse quality change in the water. This study is conducted to evaluate the feasibility of ammonium nitrogen removal and regeneration by zeolite adsorption in drinking water treatment. Also, the reuse possibility of zeolite is evaluated to change the removal efficiency of ammonium nitrogen through several times of regeneration. The ammonium nitrogen was not removed in sand filter, but it was almost removed in zeolite filter during 7 days. The sand and zeolite filters have a similar result of turbidity removal. Therefore, zeolite filtration was confirmed the removal of turbidity and ammonium nitrogen as a media. When compared KCl with NaCl as a chemical for zeolite regeneration, it is demonstrated that KCl was more efficient than NaCl in the ability of zeolite regeneration. The adsorption rate of ammonium nitrogen was almost not decreased in the results of several times of regeneration. It is indicated that both zeolite and regeneration solution were possible to reuse without variation of regeneration rate through this study.

효과적인 수중의 인제거를 위해 강자성력을 가진 카보닐 철을 활용한 복합제 제조 (Preparation of Composites using Carbonyl Iron with Ferromagnetic Properties for Effective Phosphorus Removal in Water)

  • 김종규
    • 한국수처리학회지
    • /
    • 제26권6호
    • /
    • pp.117-124
    • /
    • 2018
  • For the effective removal of phosphorus in water, a novel type of composite was prepared by combining Poly Alumiun Chloride, widely used in sewage/wastewater treatment plants, and Humic Acid particles, which are known to have phosphorus removal ability, with CI. The surface of the ferromagnetic CI particles was oxidized and activated, and then PAC and HA were synthesized to finally produce CIPAC and CIHA. CIPAC and CIHA prepared by this study showed similar results to the phosphorus removal efficiencies of PAC and HA coagulants. The novel composite has a larger weight than the conventional coagulant, and the coagulated sludge precipitates rapidly. The sludge could be easily separated in a short time if the external magnetic field was given by the ferromagnetic force of CIPAC and CIHA prepared with CI as support. Therefore, it can be concluded that if phosphorus removal is carried out using CIPAC and CIHA prepared through this study with external magnetic field, the sedimentation rate will be much faster than that of conventional coagulant. Thus it is possible to obtain a high economic benefit in the sludge recovery part.

호기성 고율 안정조에서 빛의 조사 기간과 pH가 조류의 영양물질 제거에 미치는 영향 (Effect on Nutrients Removal of Algae in Aerobic High Rate Pond by Irradiance Period and pH)

  • 공석기;안승구
    • 한국환경과학회지
    • /
    • 제6권2호
    • /
    • pp.141-152
    • /
    • 1997
  • The pilot plant had been made so as to be an association system from the various items managed to have degrees of efficiency and It have been done to consider the experimental result with irradiance period and pH influence of all major things to treatment function of Waste Stabilization Pond. The results are as following. The attained results for continuous & cyclic irradiance 1. 24L.-reactor was prior to 12L.-12D.-reactor on oxygen generation & algal production ability. 2. 24L.-reactor was prior to 12L.-12D.-reactor on nutrients removal efficiency. 3. In 24L.-reactor it maintained 5mg/L∼6mg/L, DO concent enough to a fish's survival. The attained results for pH condition 1. Oxygen generation ^ algal production in pH 4-reactor were higher than those in pH 10-reactor. 2. The acidic condition at pH 4 and alkalic condition at pH 10 did not so much affect an algal growth and nutrients removal. The attained results for whole 1. In view of the results appeared as [(NH3-N)+(NO3-N)] removal efficiency, 89.1%∼93.9% and PO4-P removal efficiency, 34.3%∼83.7% & COD removal efficiency, 88.5%∼93.9%. It is possible to treat the wastewater with starch and pH which have been known as thedifficult problem. 2. At the point of non using methanol to nitrificate NO3-N, the nutrients removal method by using an algal growth is the most economical method in the whole nutrients removal methods. 3. The nutrients removal method by using an algal growth contributes to natural ecosystem. 4. The nutrients removal method by using an algal growth is excellant in the prevention against the eutrophication.

  • PDF

BFT 시스템 사육 수에서 분리한 Bosea sp.의 아질산 제거 특성과 활용 (Nitrite Removal Characteristics and Application of Bosea sp. Isolated from BFT System Culture Water)

  • 이혜진;김효원;김명희;김대중;김광현;배선혜;이규태;한창희
    • 한국수산과학회지
    • /
    • 제50권4호
    • /
    • pp.378-387
    • /
    • 2017
  • This study was performed to isolate bacteria that could control the nitrite levels in a biofloc technology (BFT) culture tank. Nitrite-eliminating bacteria were isolated from a BFT culture tank rearing goldfish, and the isolated bacterium exhibiting the most potent nitrite eliminating ability was labeled as the "NOBSB1" strain. Sequencing the 16S rRNA revealed that NOBSB1 is a species in the genera Bosea. NOBSB1 had the following characteristics with regard to nitrite removal: (1) it removed nitrite by functioning heterotrophically in the presence of a carbon source (sugars); (2) it eliminated nitrite most effectively within a temperature range of $20-30^{\circ}C$, but its activity decreased at temperatures above $35^{\circ}C$ and below $20^{\circ}C$; (3) it had optimum nitrite removal ability within a pH range of 6.0-8.0; (4) it removed nitrite more effectively under hypoxic than aerobic conditions. NOBSB1 inoculation did not decrease ammonia or nitrate levels, but eliminated nitrite in a BFT culture tank rearing common carp (Cyprinus carpio). After inoculating the NOBSB1 strain in a BFT culture tank, NOBSB1 controlled and sufficiently reduced the nitrite concentration in the tank.

Pain and quality of life related to suture removal after 3 or 7 days at the extraction sites of impacted lower third molars

  • Rodanant, Pirasut;Wattanajitseree, Kannika;Shrestha, Binit;Wongsirichat, Natthamet
    • Journal of Dental Anesthesia and Pain Medicine
    • /
    • 제16권2호
    • /
    • pp.131-136
    • /
    • 2016
  • Background: This study aimed to evaluate the patient's pain and quality of life after suture removal at either 3 or 7 days following the bilateral surgical extraction of impacted lower third molars. Methods: This study was a prospective, randomized controlled clinical trial carried out in 30 patients, who acted as their own control. Each patient required the bilaterally impacted mandibular third molars to be extracted. The impacted teeth were removed and the wound margins were approximated and sutured with black braided silk. The suture material was removed on day 3 on one side and on day 7 on the other. Each participant was asked to complete a questionnaire after the removal of the suture material on each designated day. Results: Regarding overall clinical symptoms, the mean VAS scores of male and female participants on day 3 were not significantly different from those on day 7. A significant difference was found in female participants, in that overall daily activity was better on day 7. There were significant differences in the ability to smile and laugh in both sexes and the ability to chew in the male participants was better on day 7. Conclusions: There were no significant differences in the patient's pain and quality of life between suture removal on day 3 or on day 7 following surgery to remove impacted lower third molars.

Cavitation에 의한 슬러지 가용화와 PGA를 이용한 하수고도처리에 관한 연구 (Advanced Wastewater Treatment using Sludge Solubilization by the Cavitation and PGA addition)

  • 김동하
    • 상하수도학회지
    • /
    • 제22권4호
    • /
    • pp.449-454
    • /
    • 2008
  • Some pretreatment methods have been proposed to enhance the biodegradability and to shorten the hydrolysis reaction time. By means of efficient pretreatment the suspended solids (SS) can be made of better accessible for the anaerobic bacteria. There are several ways how this can be accomplished, which include biological, mechanical, thermal, and chemical methods. For the sludge solubilization using the cavitation phenomenon, we have tried to develop a pretreatment process consisted of a reactor and pumps. The objectives of this study were to develop a advanced wastewater treatment consisted of IABR and the cavitation with PGA. The most effective removal for organic matter and nutrients were occured when both cavitation pretreatment and ${\gamma}$-PGA were applied at the IABR process. Only small portion of ${\gamma}$-PGA at a rate of 1.38mg/L, was enough to improve sedimentation ability, SS removal efficiencies, and sludge volume reduction. After the sludge solubilization by the cavitation, SCOD increased to 193% and SS decreased to 36%. The removal ratio of BOD was 94.5%, T-N removal ratio was 85.5% and T-P removal ratio was 84.9%. The combination process of the IABR with the cavitation and PGA addition seems to be very effective alternative wastewater treatment process.