• 한국군사과학기술학회지
• /
• 제13권6호
• /
• pp.982-989
• /
• 2010

This paper shows accuracy comparison results of reliability estimation methods for one-shot systems such as ammunitions. Quantal-response data, following a binomial distribution at each sampling time, characterizes lifetimes of one-shot systems. Various quantal-response data of different sample sizes are simulated using lifetime data randomly sampled from assumed weibull distributions with different shape parameters but the identical scale parameter in this paper. Then, reliability estimation methods in open literature are applied to the simulated quantal-response data to estimate true reliability over time. Rankings in estimation accuracy for different sample sizes are determined using t-test of SSE. Furthermore, MSE at each time, including both bias and variance of estimated reliability metrics for each method are analyzed to investigate how much both bias and variance contribute the SSE. From the MSE analysis, MSE provides reliability estimation trend for each method. Parametric estimation method provides more accurate reliability estimation results than the other methods for most of sample sizes.

• 전산구조공학
• /
• 제7권1호
• /
• pp.109-116
• /
• 1994

구조물의 신뢰도를 평가하는 방법을 살표보고 각각의 장.단점을 비교한다. 각 방법의 정확성을 평가하는 기준으로는 Crude Monte Carlo(CMC)방법을 택하여 Importance Sampling(IS)방법, 그리고 Directional Simulation(DS) 방법을 살펴보고 1차 근사방법은 현재 많이 사용되고 있는 Rackwitz-Fiessler(RF)방법, Chen과 Lind가 제안한 3-parameter방법(CL), Hohenbichler가 제안한 Rosenblatt 변환방법(RT)을 그리고 2차 근사방법은 Breitung이 제안한 곡률적합 포물선 (Curvature Fitted Paraboloid, CFP) 공식과 Kiureghian이 제안한 점적합 포물선(Point Fitted Paraboloid, PFP)공식, 그리고 Log-Likelihood Function을 이용하여 원변수공간에서 파괴확률을 구하는 2차 근사공식(LLF)을 비교한다. 그리고 한계상태식이 불명확할 때 효율적으로 사용할 수 있는 반응응답법(Response sufrace method, RSM)을 살펴본다. 각 방법의 효율성 특히 적용 가능성을 예제를 통해 해석한 결과 추출법의 경우는 DS방법이, 그리고 근사방법에서는 RSM방법이 효율적임을 알 수 있다.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제14권1호
• /
• pp.53-57
• /
• 2014

In the fields of reliability application, the most commonly used test methods for reliability demonstration are zero-failure acceptance tests since they require fewer test samples and less test time compared to other test methods that guarantee the same reliability with a given confidence level. For products with lognormal lifetime distribution, the value of scale parameter is usually assumed to be known in designing reliability demonstration tests. It is important to select correct values of scale parameters to guarantee the specified reliability with given confidence level exactly. The effect of using wrong values of scale parameters in designing reliability demonstration test for products with lognormal lifetime distribution is examined and selecting proper values of scale parameters for conservative reliability demonstration is discussed.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제11권3호
• /
• pp.225-234
• /
• 2011

In the fields of reliability application, the most commonly used test methods for reliability qualification are zero-failure acceptance tests since they require fewer test samples and less test time compared to other test methods that guarantee the same reliability with a given confidence level. Usually values of shape parameters are assumed to be known in designing reliability qualification tests for Weibull lifetime distribution. It is important to select correct values of shape parameters to guarantee the specified reliability with given confidence level exactly. The effect of using wrong values of shape parameters in designing reliability qualification test for products with Weibull lifetime distribution is examined and selecting proper values of shape parameters for conservative reliability qualification is discussed.

• International Journal of Reliability and Applications
• /
• 제17권2호
• /
• pp.121-135
• /
• 2016

In this paper, we study a system of five components. One of them is a bridge network component. Each of these components is identical and has a failure rate as a function of time. The system components have non-constant failure rates. The given system is improved by using the reduction, hot duplication, and cold duplication methods. We derive the equivalence factors of the bridge structure system to be as another system improved according to these different methods. The ${\beta}-fractiles$ are obtained to compare the original system with these improved systems. Finally, we present numerical results to show the difference between these methods.

• Structural Engineering and Mechanics
• /
• 제83권2호
• /
• pp.167-178
• /
• 2022

Surrogate models aim to approximate the performance function with an active-learning design of experiments (DoE) to obtain a sufficiently accurate prediction of the performance function's sign for an inexpensive computational demand in reliability analysis. Nevertheless, many existing active-learning methods are limited to the Kriging model, while the uncertainties of the Kriging itself affect the reliability analysis results. Moreover, the existing general active-learning methods may not achieve a fully satisfactory balance between accuracy and efficiency. Therefore, a novel active-learning method GLM-CM is constructed to yield the issues, which conciliates several merits of existing methods. To demonstrate the performance of the proposed method, four examples, concerning both mathematical and engineering problems, were selected. By benchmarking obtained results with literature findings, various surrogate models combined with the proposed method not only provide an accurate reliability evaluation while highly alleviating the computational burden, but also provides a satisfactory balance between accuracy and efficiency compared to the other reliability methods.

• International Journal of Reliability and Applications
• /
• 제8권2호
• /
• pp.153-173
• /
• 2007

Wood-plastic composites (WPC) are gaining market share in the building industry because of durability/maintenance advantages of WPC over traditional wood products and because of the removal of chromated copper arsenate (CCA) pressure-treated wood from the market. In order to ensure continued market share growth, WPC manufacturers need greater focus on reliability, quality, and cost. The reliability methods outlined in this paper can be used to improve the quality of WPC and lower manufacturing costs by reducing raw material inputs and minimizing WPC waste. Statistical methods are described for analyzing stiffness (tangent modulus of elasticity: MOE) and flexural strength (modulus of rupture: MOR) test results on sampled WPC panels. Descriptive statistics, graphs, and reliability plots from these test data are presented and interpreted. Sources of variability in the MOE and MOR of WPC are suggested. The methods outlined may directly benefit WPC manufacturers through a better understanding of strength and stiffness measures, which can lead to process improvements and, ultimately, a superior WPC product with improved reliability, thereby creating greater customer satisfaction.

• 산업진흥연구
• /
• 제7권4호
• /
• pp.1-8
• /
• 2022

우리 주위를 살펴보면 한 번 사용하고 버리는 일회용품이 많다. 폭죽이나 탄약과 같은 일회용품이 대표적인데 이들 일회용품은 제조 후 한 동안 저장되어 있다가 필요한 때 사용하고 나면 폐기처분하게 된다. 하지만 이런 일회용품은 일반 운영장비와 달리 신뢰성평가가 제대로 이루어지지 못했다. 이에 본 연구에서는 일회용품 중에서 탄약에 대한 저장탄약신뢰성프로그램을 통해 탄약의 경우 신뢰성 확보를 위해 정부에서 어떤 일을 하는지 먼저 살펴본다. 이어서 통계분석적인 측면에서 탄약과 같은 일회용품에 대한 신뢰성분석 방안으로 어떤 것이 있는지 알아본다. 구체적으로 통계학에서 로트의 품질수준을 파악하는 샘플링검사를 활용하여 일정한 시기에 생산된 탄약에 대한 신뢰성의 수준을 파악할 수 있다. 본 연구에서는 KS Q0001인 계수규준형 1회 샘플링검사표를 이용할 수 있음으로 보여준다. 다음으로 탄약의 저장신뢰도를 파악할 수 있는 방법으로 비모수적인 방법과 모수적인 방법을 소개한다. 비모수적인 방법중에서 특히 Kaplan-Meier 방법은 중도중단데이터가 포함된 경우에도 활용될 수 있다. 마지막으로 모수적인 방법 중에는 신뢰성분석에 많이 활용되는 와이블분포가 탄약의 저장신뢰도를 파악하는 데에도 활용될 수 있다.

• 한국산학기술학회논문지
• /
• 제12권2호
• /
• pp.581-587
• /
• 2011

계수형 데이터를 이용하여 신뢰도를 추정하는 방법은 원자력 설비, 의약품, 우주발사체 등과 같은 다양한 시스템의 신뢰도 평가에 사용되고 있다. 본 논문은 모수 추정법을 포함하여 문헌에 공개된 신뢰도 추정방법에 대한 샘플 수 및 샘플링 시점 수 변화에 대한 정확성의 민감도를 분석하고 비교한 결과를 제시한다. 또한 민감도 분석 결과를 이용하여 각 추정 방법의 정확성을 향상시키기 위한 방안을 제시하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 추계 학술대회논문집
• /
• pp.187-191
• /
• 2004

The conventional reliability based design optimization(RBDO) methods require high computational cost compared with the deterministic design optimization(DO) methods. To overcome the computational inefficiency of RBDO, single loop methods have been proposed. These need less function calls than that of RBDO but much more than that of DO. In this study, the approximate reliability method is proposed that the computational requirement is nearly the same as DO and the reliability accuracy is good compared with that of RBDO. Using this method, the 3-D viscous aerodynamic shape design optimization with uncertainty is performed very efficiently.