• JSTS:Journal of Semiconductor Technology and Science
• /
• v.14 no.4
• /
• pp.365-375
• /
• 2014

This paper proposes an abnormal V-shaped-error-free non-blind deconvolution technique featuring an adaptively segmented forward-problem based iterative deconvolution (ASDCN) process. Unlike the algebraic based inverse operations, this eliminates any operations of differential and division by zero to successfully circumvent the issue on the abnormal V-shaped error. This effectiveness has been demonstrated for the first time with applying to a real analysis for the effects of the Random Telegraph Noise (RTN) and/or Random Dopant Fluctuation (RDF) on the overall SRAM margin variations. It has been shown that the proposed ASDCN technique can reduce its relative errors of RTN deconvolution by $10^{13}$ to $10^{15}$ fold, which are good enough for avoiding the abnormal ringing errors in the RTN deconvolution process. This enables to suppress the cdf error of the convolution of the RTN with the RDF (i.e., fail-bit-count error) to $1/10^{10}$ error for the conventional algorithm.

• IEIE Transactions on Smart Processing and Computing
• /
• v.2 no.4
• /
• pp.216-225
• /
• 2013

This paper discusses the issues regarding an abnormal V-shaped error confronting algebraic-based deconvolution process. Deconvolution was applied to an analysis of the effects of the Random Telegraph Noise (RTN) and Random Dopant Fluctuation (RDF) on the overall SRAM margin variations. This paper proposes a technique to suppress the problematic phenomena in the algebraic-based RDF/RTN deconvolution process. The proposed technique can reduce its relative errors by $10^{10}$ to $10^{16}$ fold, which is a sufficient reduction for avoiding the abnormal ringing errors in the RTN deconvolution process. The proposed algebraic-based analyses allowed the following: (1) detection of the truncating point of the TD-MV distributions by the screening test, and (2) predicting the MV-shift-amount by the assisted circuit schemes needed to avoid the out of specs after shipment.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.4 no.1
• /
• pp.31-40
• /
• 1998

Through the combination of existing tidal prediction model and numerical tidal model, the efficient tidal prediction system was formulated and applied to the neighboring area of Pusan port. Because all tidal constituents for tidal prediction (69 tidal constituents are normally used) couldn't be considered due to the physical limits on computing process, some errors between the observed and predicted values were inevitably occurred. But it was confirmed that the computed values with maximum 10% of relative errors can be obtained if four major tidal constituents(M2, S2, K1, O1) are used. Thus, if other constituents than four major tidal constituents are additionally used, more accurate values will be obtained. Furthermore, if the database for harmonic constants in coastal waters is made in advance, using the numerical tidal model, prompt tidal prediction can be achieved at any time when it is required.

• Research in Mathematical Education
• /
• v.18 no.2
• /
• pp.149-170
• /
• 2014

The Vietnamese language has a specific property related to the zero in the name-number system. This study was conducted to examine the impact of linguistic differences and of the zero's position in a number on a transcoding task (verbal number into Arabic number). Vietnamese children and French-speaking Belgian children, from grades 3 to 6, participated in the study. The success rate and the type of errors they made varied, depending on their grade and language. At Grade 4, Vietnamese children showed performances equivalent to Grade 6 Belgian children. Our results confirmed the support provided by language to the understanding and performances in a transcoding task. Results also showed that a syntactic zero is easier to manipulate than a lexical zero for Vietnamese children. The relative influence of language and the source of errors are discussed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 1997.10a
• /
• pp.111-124
• /
• 1997

With the combination of existing tidal predictio model and numerical tidal model, the efficient tidal prediction system was formulated and applied to the neighboring area of Pusan port. Because all tidal constituents for prediction (normally 69 constituents are used) can't be considered due to difficulties on computing efforts, some errors between the observed and predicted values were inevitably occurred. But it was confirmed that the practical results with about 10% of relative errors were obtained if four major tidal constituents(M$_2$, S$_2$. $K_1$, $O_1$) are used at least. Thus, if other constituents than four major tidal constituents are additornaly used, more accurate results will be obtained . Furthermore, if the databases of harmonic constants in coastal waters is made in advance using the numberical tidal model, prompt tidal prediction could be achieved whenever required.

• Proceedings of the KSPS conference
• /
• 2003.05a
• /
• pp.163-167
• /
• 2003

Intonation as suprasegmental phonetic features conveys meanings on the postlexical or utterance level in a linguistically structured way. It includes three aspects: tunes, relative prominence, and intonational phrasing. In this article, I will treat how prosodic phrasing is functionally related to the listening comprehension of English by analysing the students' errors of listening comprehension. When utterance meaning is conveyed, it is realized to be divided into intonational phrases. The small intonational phrase is regarded as an intermediate phrase which has a primary accent and a phrase tone or audible break. Most students' errors of listening occurred with linking pronunciation in the intermediate phrases of the fast speech. Thus through the smallest unit with tune we can help students improve their pronunciation and listening ability of English.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.4
• /
• pp.457-467
• /
• 2022

Electron bombardment to silicate glass during electron probe microanalysis (EPMA) causes outward migration of Na from the excitation volume and subsequent decrease in the measured X-ray count rates of Na. To acquire precise Na₂O content of silicate glass, one should use proper analytical technique to avoid or minimize Na migration effect or should correct for decreases in the measured Na X-ray counts. In this study, we analyzed 8 silicate glass standard samples using automated Time Dependent Intensity (TDI) correction method of Probe for EPMA software that can calculate zero-time intercept by extrapolating X-ray count changes over analysis time. We evaluated an accuracy of TDI correction for Na measurements of silicate glasses with EPMA at 15 kV acceleration voltage and 20 nA probe current electron beam, which is commonly utilized analytical condition for geological samples. Results show that Na loss can be avoided with 20 ㎛-sized large beam (<0.1 nA/㎛²), thus silicate glasses can be analyzed without TDI correction. When the beam size is smaller than 10 ㎛, Na loss results in large relative errors up to -55% of Na₂O values without correction. By applying TDI corrections, we can acquire Na₂O values close to the reference values with relative errors of ~ ±10%. Use of weighted linear-fit can reduce relative errors down to ±6%. Thus, quantitative analysis of silicate glasses with EPMA is required for TDI correction for alkali elements such as Na and K.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2270-2273
• /
• 2003

Fuzzy logic control has been widely implemented in air conditioning and ventilation systems which has uncertainty or high robust system. Since the dynamic behaviors of the systems contain complexity and uncertainty in its parameters , several fuzzy logic controllers had been implemented to control room temperature in the field of air conditioning system. In this paper, the fuzzy logic control has been developed to control room temperature and humidity in the precision air conditioning systems. The nonlinear mathematical model was formulated using energy and continuity equations. MATLAB was used to simulate the fuzzy logic control of the multi-variable air conditioning systems. The simulation results show that fuzzy logic controller can reduce the steady-state errors of the room temperature and relative humidity in multivariable air conditioning systems. The offset are less than 0.5 degree Celsius and 3 percent in relative humidity respectively under random step disturbance in heating load and moisture load respectively

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.2 no.2
• /
• pp.97-109
• /
• 1998

A comparison of the two dimensional heat loss, computed using the analytical method and the finite difference method in two models(i.e. one is a parabolic fin whose parabolic curves meet at the fin center line and the other is a transformed parabolic fin whose tip cuts vertically), is made assuming the analytical method is correct. For these methods, the root temperature and surrounding convection coefficients of these fins are assumed as constants. The results show that the relative errors of the heat loss between the two methods for the parabolic fin whose tip cuts vertically are smaller than those for the one whose tip does not cut. In case of Bi=0.01, the values of the heat loss obtained using a finite difference method are close to those values obtained using the analytical method for both models. The values of the heat loss from both models calculated by using the analytical method are almost the same for given range of non-dimensional fin length in case of Bi = 0.01 and 0.1.

• Journal of Korean Society for Quality Management
• /
• v.17 no.2
• /
• pp.121-141
• /
• 1989

This paper is concerned with a development and evaluation of heuristics for the multi-stage sequence dependent flowshop sequencing. Eighteen heuristics, CAM1, CAM2, and etc., are proposed. The performance measure is a makespan which is to be minimized. The experiment for each algorithm is designed for a 4*3*3 factorial design with 360 observations. The experimental factors are PS(ratio of processing times to setup times), M(number of machines), N(number of jobs). The makespan of the proposed heuristics is compared with the optimal makespan obtained by the complete enumeration of schedules. This yardstick of comparison is called a relative error. The mean relative errors of the eighteen heuristics are from 2.048% to 8.717%. The computational results are analysed using SPSS. The experimental results show that the three factors are statistically significant at 5% level. The simulation for the large size problems is conducted to show having the similar computational results like the small size problems.