• The korean journal of orthodontics
• /
• v.24 no.2
• /
• pp.319-329
• /
• 1994

This study was carried out to research the adaptation patterns of head posture after activator therapy in functional class III malocclusion patients. For this purpose, 29 functional class III malocclusion patients, from the ages of 8 to 13 years old, were used. 1, Increse in capacity of oral cavity capacity were found in all the samples, but craniocervical angulation were varied into incresed group and decreased group after activator therapy. 2. Head posture exhibited the compensatory adaptation in the relative growth increments of the vertical dimension, ALFH and PLFH. 1) A group with more PLFH and less sagittal angle showed relatively small growth increment in PLFH during the treatment period, thus craniocervical angulation was increased. 2) A group with less PLFH and more sagittal angle showed relatively great growth incrmenet in PLFH during the treatment period, thus craniocervical angulation was decreased.

• 한국전산유체공학회:학술대회논문집
• /
• 2002.05a
• /
• pp.88-93
• /
• 2002

In the present research, a parametric study of aerodynamic characteristics for multi-element airfoils is performed. The major geometric parameters of interest are the gap distance between airfoils and relative deflection angle of slat/flap. The present results are mainly obtained by using inviscid flow calculation, and the aerodynamic characteristics are focused on the surface pressure distribution and the lifts. The results of the present research may be used as not only qualitative data but also quantitative data for small angle of attack flows, where the viscous effect does not play major role in terms of surface pressure distribution and lifts. A further research in this subject including viscous calculation and more geometric parameters is to be performed in the future.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.33 no.8
• /
• pp.635-642
• /
• 2009

The three-dimensional turbulent wingtip vortex flows have been examined in the present study by using the commercial code FLUENT. The standard ${\kappa}-{\varepsilon}$ model is used as a closure relationship. The wing is constructed by using an elliptic body whose aspect ratio is 3.8 and the NACA 16-020 airfoil section. The simulations for various angle attack (${\alpha}=0^{\circ}$, $5^{\circ}$, and $10^{\circ}$) are carried out. The effect of Reynolds number is also investigated in this study. As the angle attack increases, the wingtip vortex becomes stronger. However, the relative vortex strength to inlet velocity decreases as Reynolds number increases.

• Journal of the Optical Society of Korea
• /
• v.16 no.3
• /
• pp.299-304
• /
• 2012

A high angular tolerance spectral filter was realized incorporating an etalon, which consists of a $TiO_2$ cavity sandwiched between a pair of Ag/Ge mirrors. The effective angle was substantially extended thanks to the cavity's high refractive index. The device was created by embedding a 313-nm thick $TiO_2$ film in 16-nm thick Ag/Ge films through sputtering, with the Ge layer alleviating the roughness and adhesion of the Ag layer. For normal incidence, the observed center wavelength and transmission were ~900 nm and ~60%, respectively; throughout the range of $50^{\circ}$, the relative wavelength shift and transmission variation amounted to only ~0.06 and ~4%, respectively.

• International Journal of Fluid Machinery and Systems
• /
• v.9 no.4
• /
• pp.354-361
• /
• 2016

This study aims to identify aerodynamic characteristics of the ramp tab, a mechanical deflector, by conducting a non-combustive experiment using compressed air and supersonic flow test equipment. With the ramp tabs installed symmetrically and asymmetrically on the outlet of the supersonic nozzle, the structure of the flow field, the thrust spoilage, the thrust deviation angle, and the lift/drag coefficients were derived and analyzed. The results show that the asymmetrically-installed ramp tabs are advantageous relative to the symmetrically-installed tabs in terms of the performance of thrust vector control, thrust deviation angle, and lift coefficient.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.19 no.8
• /
• pp.1-7
• /
• 2005

We introduced the method to obtain four speckle patterns with relative phase shift of ${\pi}/2$ by the polarizing elements, and calculate the phase at each point of the speckle pattern in shearography using Wollaston prism and polarizing elements. Ant we analyzed the phase error caused by the azimuth angles of wave plates used in the proposed method by Jones matrix.

• Proceedings of the KIEE Conference
• /
• 2002.11a
• /
• pp.197-199
• /
• 2002

This paper describes the effects of chip arrangement configurations and the dimension of a reflecting cup upon the light output characteristics of a white lamp composed of RGB LED chips. As a result of simulation, the shorter distance between adjacent chips leads to a relative decrease in the light output efficiency due to inter-chip absorption of quanta, but rather uniform color mixing is expected. Among the factors of designing a reflecting cup it is the tilt angle of the cup wall that plays a determining role upon the variation of the light distribution. The light distribution shows a sudden change of pattern from Lambertian to Batwing at about $35^{\circ}{\sim}40^{\circ}$ of tilt angle in case of a silver-coated wall cup.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.3
• /
• pp.144-145
• /
• 1987

The relative stability as function of geometry in the rigid tricyclopropylcarbinyl cations with varied bond angle (${\alpha}$) between the plane of cyclopropane ring and the bond connecting cyclopropane ring to cationic carbon was examined by $^{19}F$ nmr spectroscopy. 7-p-Fluorophenyltricyclo[2.2.2.$0^{2,6}$]octan-7-yl(4) and 8-p-fluorophenyltricyclo[3.2.2.$0^{2,7}$]nonan-8-yl cation (8) were generated from corresponding tertiary alcohols under stable ion conditions, and their $^{19}F$ chemical shifts were compared with those of model compounds such as 7-nortricyclyl cation (3) and tricyclo[3.3.1.$0^{2,7}$]octan-8-yl cation (7). Consequently, it is concluded that the varied orientation of bond angle (${\alpha}$) within in the bisected conformation does not affect degree of the charge delocalization into cyclopropane ring.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.1
• /
• pp.57-64
• /
• 1984

Forward extrusion of sintered porous metal through conical converging die is analyzed using slab method on the basis of plasticity theory for porous metal. It is taken into consideration in the analysis that the material in the container is continuously recompressed on densified until the process reaches steady state. Extrusion pressure and distribution of relative density from the die inlet to the outlet are calculated under various process variables. The results are useful in finding initial relative density of the billet, reduction of area and cone angle of the die in order to get required final products. Experiments are done for porous copper and then compared with the computed results.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.2 s.95
• /
• pp.194-200
• /
• 1999

An elastomeric bushing is a device used in automotive suspension systems to cushion the force transmitted from the wheel to the frame of the vehicle. A bushing is an elastomeric hollow cylinder which is bonded to a solid metal shaft at its inner surface and a metal sleeve at its outer surface. For axial motion case, the relation between the force applied to the shaft and their relative displacement was considered. In this paper, the relation between the moment applied to the shaft and their relative deformation(angle of rotation) is considered for the torsional motion case. Numerical solutions of the boundary value problem represent the exact bushing response for use in the method for determining the moment relaxation function of the bushing. Solutions also allow for comparison between the exact moment-deformation behavior and that predicted the proposed model. It is shown that the predictions of the proposed moment-deformation relation are in very good agreement with the exact results.