• Korean Journal of Construction Engineering and Management
• /
• v.17 no.3
• /
• pp.143-155
• /
• 2016

Recently, the interest on applying AVM(Around View Monitoring) systems in construction equipments have been increasing due to the demand for better control, work efficiency and safety. Most of the existing AVM systems have been developed focusing on the application in automobiles and only several AVM systems have been developed for construction equipments. However, the original technology of AVM remained the same as in the automobiles that failed to consider the main properties of construction equipments and suggest appropriate range of AVM display (Top-view). Therefore, the purpose of this study is to suggest a pilot type of AVM system for construction equipment. Accordingly, literature review, deduction of main consideration factors, selection of sensors, system design, algorithm development of a pilot type of AVM system for construction equipment have been conducted. A laboratory experiment has also been conducted for the deduction of further improvements. As a result, a minimum image refresh rate of 20 fps has been achieved that clearly reflects the actual situation of the equipment and also, the actual motions of Boom, Arm, Bucket have been displayed appropriately on the AVM system based on the angle data collected by sensors. However, the experiment results have also shown that the following tasks still remain for future work: 1)Improvement of AVM image interpolation, 2)Development of calibration module for variety construction equipment.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.1
• /
• pp.133-140
• /
• 2012

In SIP(Session Initiation Protocol) service, users should send SIP SUBSCRIBE messages to the SIP server to get subscription informations of the other parties, and total amount of SIP messages becomes large in network as refresh messages and notification messages are generated to each SIP subscription. In this paper, a new resource lists architecture using dynamic notification control method has been proposed to solve these problems. In this architecture, service users can control event notification generation rate dynamically from the server according to the operation circumstances, and users can control generation of notification messages during refresh for maintaining SIP session. Furthermore users can also control generation of notification messages according to session connection conditions. A new resource lists MIME type has been designed, and several parameters for dynamic notification message control have been added to the extended SIP message headers. In this system new resource lists MIME type can be used for processing of the event package. Therefore total amount of SIP messages in network can be largely reduced, and load of the resource lists server for processing messages can be reduced also. The performance of the proposed method has been evaluated by experiments.

• Journal of KIISE:Databases
• /
• v.29 no.1
• /
• pp.34-43
• /
• 2002

Since traditional static metadata set like Dublin Core has static metadata attributes about bibliography information, integration of metadata for various metadata, problems about standard and extension of metadata must be considered for applying it to new environment. Specially, as event-driven metadata write method included the notion of e-commerce come out for interoperability in digital libraries, traditional metadata management which cannot distinguish between different kinds of update operations to new extension of metadata set occurs unsuitable waiting of update operation. So, improvement is needed about it. In this paper, we show whether alleviative transaction consistency can be applied to digital library or not. Also it would divide newer metadata into static metadata attribute connected in read operation within user read-only transaction and dynamic metadata attribute in update operation within dynamic(e-commerce) update transactions. We propose newer metadata management algorithm considered in classfication of metadata attributes and dynamic update transaction. Using two version for minimal maintenance cost and ARU(Appended Refresh Unit) for dynamic update transaction, to minimize conflict between read and write operations shows fast response time and high recency ratio. As a result of the performance evaluation, we show our algorithm is proved to be better than other algorithms in newer metadata environments.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.12
• /
• pp.67-73
• /
• 2010

In SIP(Session Initiation Protocol) environment, the presence event notification operation makes presence service user to recognize presence information status changes of the other party. In conventional method, the user should send each SIP SUBSCRIBE message containing the address of the other party to the presence server. Furthermore each presence subscription requires refresh messages, and the amount of notification messages from the other party becomes large. These facts increases network traffic and the load of presence server. In this paper, to solve these problems a new presence list service has been suggested. It uses a presence list consists of URI of the other party and make it possible to subscribe by using one SUBSCRIBE message. So this method decreases the amount of SUBSCRIBE messages and refresh messages, and it also decreases the amount processing event notification messages from the subscribed the other party. And to increase the efficiency, a presence filtering method which enables to include some parts of selected presence information into the notification message body has been also suggested. The implemented system can reduce SIP message related network traffic and message processing time of the presence server. The performance of this proposed system has been evaluated by experiments, and the results showed decreasing of server processing time.

• Journal of KIISE:Databases
• /
• v.28 no.4
• /
• pp.688-701
• /
• 2001

Web caching has become an important problem addressing the performance issues in web applications. In this paper we propose a method that enhances the performance of web caching by incorporating the expiration time of web data we introduce the notion of the effective reference probability that incorporates the effect of expiration time into the reference probability used in the existing cache replacement algorithms .We formally define the effective reference probability and derive it theoretically using a probabilistic model. By simply replacing probabilities with the effective reference probability in the existing cache replacement algorithms we can take the effect of expiration time into account The results of performance evaluation through experiments show that the replacement algorithms using the effective reference probability always outperform the existing ones. The reason is that the proposed method precisely reflects the theoretical probability of getting the cache effect, and thus, incorporates the influence of the expiration time more effectively. In particular when the cache fraction is 0.05 and data update is comparatively frequent (i.e. the update frequency is more than 1/0 of the reference frequency) the performance enhancement is more than 30% in LRU-2 and 13% in Aggarwal's method (PSS integrating a refresh overhead factor) The results show that effective reference probability contributes significantly to the performance enhancement of the web cache in the presence of expiration time.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.6
• /
• pp.339-345
• /
• 2023

Design exists behind technology. Design is intertwined with the needs of daily life and market structures, and while dealing with technology, it can become insensitive to its meaning. Unlike other social media platforms, Instagram consists of image-based content. The purpose of this study is to examine the addictive design of Instagram. Furthermore, we discuss the ethical responsibilities that designers must have. A theoretical framework for understanding Instagram design is established through a review of major domestic and international literature that has been previously studied. Understand the history, structure, and functions of Instagram and identify Instagram designs that promote social media addiction. In this study, we introduced the mechanism by which Instagram promotes user addiction through design issues. (1) Pull-to-Refresh (2) Red color in push alarm (3) Profile photo border expression in Instagram Story. This design stimulates users' social desires and FOMO, forming the structure of obsessive Instagram usage habits. Instagram is an example that forces us to reconsider the ethical role of design and designers along with the advancement of technology. In today's world, the intrinsic value of what they create, including our society and life itself.

• ETRI Journal
• /
• v.25 no.6
• /
• pp.489-502
• /
• 2003

This paper presents an MPEG-4 video codec, called MoVa, for video coding applications that adopts 3G-324M. We designed MoVa to be optimal by embedding a cost-effective ARM7TDMI core and partitioning it into hardwired blocks and firmware blocks to provide a reasonable tradeoff between computational requirements, power consumption, and programmability. Typical hardwired blocks are motion estimation and motion compensation, discrete cosine transform and quantization, and variable length coding and decoding, while intra refresh, rate control, error resilience, error concealment, etc. are implemented by software. MoVa has a pipeline structure and its operation is performed in four stages at encoding and in three stages at decoding. It meets the requirements of MPEG-4 SP@L2 and can perform either 30 frames/s (fps) of QCIF or SQCIF, or 7.5 fps (in codec mode) to 15 fps (in encode/decode mode) of CIF at a maximum clock rate of 27 MHz for 128 kbps or 144 kbps. MoVa can be applied to many video systems requiring a high bit rate and various video formats, such as videophone, videoconferencing, surveillance, news, and entertainment.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.301-303
• /
• 2001

In this paper we present a Capacitor Charging Power Supply (CCPS) using a series-resonant three-level inverter topology to improve voltage regulation and use semiconductor switches having low blocking voltage capability such as MOSFETs. This inverter can be operated with two modes, Full Power Mode (FPM) and Half Power Mode (HPM). In FPM inverter supplies the high frequency step up transformer with full DC-link voltage and in HPM with half DC-link voltage. HPM switching method will be adopted when CCPS output voltage reaches the preset target value and operates in refresh mode-charge is maintained on the capacitor. In this topology each semiconductor devices blocks a half of the DC-link voltage[2]. A 15kW, 30kV CCPS has been built and will be tested for an electric precipitator application. The CCPS operates from an input voltage of 500VDC and has a variable output voltage between 10 to 30kV and 1kHz repetition rate at 44nF capacitive load [3]. A resonant frequency of 67.9kHz was selected and a voltage regulation of $0.83\%$ has been achieved through the use of half power mode without using the forced cut off the switch current [1]. The theory of operation, circuit topology and test results are given.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.68-73
• /
• 2009

As various haptic algorithms and haptic equipments have developed, the computer simulation includes the haptic simulation. Basically, the haptic simulation requires very fast refresh rate approximately 1000 Hz. The traditional haptic simulations have satisfied that requirement by simplifying the target model. In soft body simulation, simplifying the deformation is not good because the visual feedback is important. Separating haptic model from deformable model can be solution of that problem. However, the user may feel a subtle distiction because the relationship between two models are not clear. In this paper, we propose the hybrid model to manipulate haptic rendering and deformation and define the relationship between two models.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.2
• /
• pp.135-144
• /
• 2008

A bootstrap circuit is widely used for the floating gate power supply of Intelligent power module (IPM). A bootstrap circuit is simple and inexpensive. However, the duty cycle and on-time are limited by the requirement to refresh the charge in the bootstrap capacitor. And the value of the bootstrap capacitor should be increased as the switching frequency decreases. A charge pump circuit can be used to overcome the problems. This paper deals with an analysis and design of a charge pump circuit for the floating gate power supply of an IPM. The simulation and experiment are carried out for an induction motor drive system. The results well verifies the validity of the proposed circuit and design method.