• 전기학회논문지
• /
• 제66권2호
• /
• pp.354-356
• /
• 2017

We focused on light management technology in amorphous silicon solar cells to suppress increase in absorber thickness for improving power conversion efficiency (PCE). $MgF_2$ and $TiO_2$ anti-reflection layers were coated on both sides of Asahi VU ($glass/SnO_2:F$) substrates, which contributed to increase in PCE from 9.16% to 9.81% at absorber thickness of only 150 nm. Also, we applied very thin $MgF_2$ as a rear reflector at n-type nanocrystalline silicon oxide/Ag interface to boost photocurrent. By reinforcing rear reflection, we could find the PCE increase from 10.08% up to 10.34% based on thin absorber about 200 nm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.235-235
• /
• 2010

The Anti-reflection coating(ARC) properties can be formed on silicon substrate using a simple electrochemical etching technique. This etching step can be improve solar cell efficiency for a solar cell manufacturing process. This paper is based on the removal of silicon atoms from the surface a layer of porous silicon(PSi). Porous silicon is form by anodization and can be obtained in an electrolyte with hydrofluoric. It have demonstrated the feasibility of a very efficient porous Si layer, prepared by a simple, cost effective, electrochemical etching method. We expect our research can results approaching to lower than 10% of reflectance by optimization of process parametaer.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1114-1115
• /
• 2008

In this paper, we study the optical characteristics of low iron glass for photovoltaic modules fabrication. Tow types of glasses are examined by optical transmittance and reflection measurement. Also, by making laminated glass, we analyze the difference between glass maker. Mini-PV module is fabricated to compare optical reflectance through lamination process. Anti-reflection and catalyst-coated glasses are suggested for advanced technology to obtain high electrical generation output. The specific analysis is shown in the following paper.

• Ocean Systems Engineering
• /
• 제10권2호
• /
• pp.201-226
• /
• 2020

A systematic numerical comparative study of the performance of semicircular and rectangular submerged breakwaters interacting with solitary waves is the basis of this paper. To accomplish this task, Nwogu's extended Boussinesq model equations are employed to simulate the interaction of the wave with breakwaters. The finite difference technique has been used to discretize the spatial terms while a fourth-order predictor-corrector method is employed for time discretization in our numerical model. The proposed computational scheme uses a staggered-grid system where the first-order spatial derivatives have been discretized with fourth-order accuracy. For validation purposes, five test cases are considered and numerical results have been successfully compared with the existing analytical and experimental results. The performances of the rectangular and semicircular breakwaters have been examined in terms of the wave reflection, transmission, and dissipation coefficients (RTD coefficients) denoted by K_R, K_T, K_D. The latter coefficient K_D emerges due to the non-energy conserving K_R and K_T. Our computational results and graphical illustrations show that the rectangular breakwater has higher reflection coefficients than semicircular breakwater for a fixed crest height, but as the wave height increases, the two reflection coefficients approach each other. un the other hand, the rectangular breakwater has larger dissipation coefficients compared to that of the semicircular breakwater and the difference between them increases as the height of the crest increases. However, the transmission coefficient for the semicircular breakwater is greater than that of the rectangular breakwater and the difference in their transmission coefficients increases with the crest height. Quantitatively, for rectangular breakwaters the reflection coefficients K_R are 5-15% higher while the diffusion coefficients K_D are 3-23% higher than that for the semicircular breakwaters, respectively. The transmission coefficients K_T for rectangular breakwater shows the better performance up to 2.47% than that for the semicircular breakwaters. Based on our computational results, one may conclude that the rectangular breakwater has a better overall performance than the semicircular breakwater. Although the model equations are non-dissipative, the non-energy conserving transmission and reflection coefficients due to wave-breakwater interactions lead to dissipation type contribution.

• 한국실내디자인학회논문집
• /
• 제24권5호
• /
• pp.87-98
• /
• 2015

As an apartment house as well as improving quality of life is becoming one of the brands, it is increasing the importance of the outer space with the facilities in the housing complex. In particular, the outdoor playground such as the community facilities that children and adults share as the activity areas for residents has received attention. However, actually children have not used many of Korean apartment housing playgrounds that were installed formally in the scrap area according to the housing plan by residential construction standards. it is considered necessary to improve the quality of the playground in housing complex and reform it in order to make the eco-friendly play space in which children can play safely and h healthily. As an alternative, we analyzed the eco-friendly properties of the playgrounds installed in the eco-friendly housing complex in Germany and derived the main planning elements of eco-friendly playground. In the observational survey of the 10 playgrounds in 9 housing complexes in 5 regions in Germany, we evaluated the environment-friendliness of these playgrounds in the 8 fields(location and placement, ecological environment, play space, play equipment and facilities, additional facilities, materials and resources, energy saving, environmental load reduction) according to the levels(suitable, partial reflection, unsuitable, non-reflection) of reflection of eco-friendly planning factors. The following is the summary of the results about the reflection of eco-friendly planning factors. In terms of "suitable": location and placement(88.8%), play equipment and facilities(73.5%), additional facilities(60.6%), environmental load reduction(54%), and ecological environment(50%) were higher than others. In terms of "unsuitable": there was nothing. In terms of "non-reflection": energy saving(95%), additional facilities(32.2%), and materials and resources(30.9%) were in order. Therefore, on the basis of these results, this study proposed the planning indicators to be considered first and the planning factors that should be complemented and improved in the construction of apartment housing playground in future.

• 한국전기전자재료학회논문지
• /
• 제26권1호
• /
• pp.73-79
• /
• 2013

Crystalline silicon solar cells with $SiN_x/SiN_x$ and $SiN_x/SiO_x$ double layer anti-reflection coatings(ARC) were studied in this paper. Optimizing passivation effect and optical properties of $SiN_x$ and $SiO_x$ layer deposited by PECVD was performed prior to double layer application. When the refractive index (n) of silicon nitride was varied in range of 1.9~2.3, silicon wafer deposited with silicon nitride layer of 80 nm thickness and n= 2.2 showed the effective lifetime of $1,370{\mu}m$. Silicon nitride with n= 1.9 had the smallest extinction coefficient among these conditions. Silicon oxide layer with 110 nm thickness and n= 1.46 showed the extinction coefficient spectrum near to zero in the 300~1,100 nm region, similar to silicon nitride with n= 1.9. Thus silicon nitride with n= 1.9 and silicon oxide with n= 1.46 would be proper as the upper ARC layer with low extinction coefficient, and silicon nitride with n=2.2 as the lower layer with good passivation effect. As a result, the double layer AR coated silicon wafer showed lower surface reflection and so more light absorption, compared with $SiN_x$ single layer. With the completed solar cell with $SiN_x/SiN_x$ of n= 2.2/1.9 and $SiN_x/SiO_x$ of n= 2.2/1.46, the electrical characteristics was improved as ${\Delta}V_{oc}$= 3.7 mV, ${\Delta}_{sc}=0.11mA/cm^2$ and ${\Delta}V_{oc}$=5.2 mV, ${\Delta}J_{sc}=0.23mA/cm^2$, respectively. It led to the efficiency improvement as 0.1% and 0.23%.

• 자원환경지질
• /
• 제39권6호
• /
• pp.711-717
• /
• 2006

한국지질자원연구원은 1997년부터 새로운 에너지 자원으로 활용 가능성을 포함하고 있는 가스 하이드레이트를 조사하기 위해 동해 일원에서 탄성파탐사를 실시하고 있다. 탄성파 반사자료로부터 가스 하이드레이트 부존여부를 확인하는 방법은 해저면과 평행하면서 위상이 반대로 나타나는 고진폭 반사파 Bottom Simulating Reflector (BSR)과 BSR상부에서의 진폭감소, 하부에서 진폭증가와 구간속도 감소 둥을 들 수 있다. 대용량 탐사자료로 구성된 탄성파 반사자료에 깊이영역 구조보정을 적용하기 위해서는 고성능 컴퓨터와 병렬처리 기술이 필요하다. PSPI법은 적은 컴퓨터 계산량과 효율성 그리고 주파수 영역에서 구조적으로 병렬화가 용이한 특성을 지니고 있어 구조보정에 많이 이용되고 있다. 여기에서는 동해 가스 하이드레이트 탄성파 반사자료에 대한 일반자료처리와 함께 BSR로 여길 수 있는 구간에 대해 message passing interface_local area multicomputers(MPI_LAM)으로 병렬 코드화된 MPI PSPI를 이용하여 깊이영역 중합 전 구조보정에 적용하였다. 중합 전 깊이영역 구조보정 입력자료를 위한 속도모델은 자체 개발된 지오빗을 이용하여 중합 단면도로부터 지층경계면을 구하고 중합속도를 이용하여 제작하였다. BSR은 시간영역구조보정 된 중합 단면도상에서 음원모음도 3555-4162 사이와 왕복주시 2950 ms 부근에서 확인되지만 깊이영역 단면도에서는 해수면 6 km에서 17 km사이, 해저면에서 약 2.1km 깊이영역에서 나타남을 알 수 있다. 또한 구조보정 결과 반사파 에너지가 집중되는 지점에서 영상화가 잘 이루어지므로 관심대상 지역에 에너지를 많이 보낼 수 있는 자료취득변수를 결정해야 함을 알 수 있다.

• 지구물리와물리탐사
• /
• 제9권2호
• /
• pp.139-147
• /
• 2006

본 연구에서는 가스 하이드레이트 부존 예상지역인 한반도 동해 지역의 탄성파 탐사자료 처리 및 해석결과를 근거로 하여 가스 하이드레이트의 탄성파 탐사자료의 특성, 지층 정보 및 속도를 규명하기 위해서 탄성파 수치모형 실험을 실시하였다. Staggered grid를 이용한 유한차분법 탄성파 모델링 기법으로 통상적인 다중채널 탄성파 탐사, OBC 탐사 그리고 VCS 탐사에 대해여 적용하였다. 본 연구 결과 staggered grid를 이용한 유한차분법은 P파와 S파 그리고 밀도에 대한 변수를 자유롭게 적용할 수 있어서 심해저 가스 하이드레이트의 부존상황에 대한 탄성파 모델링 적용이 용이하였으며, 가스 하이드레이트의 부존 증거인 BSR (Bottom Simulating Reflector)과 같이 가스 하이드레이트층과 자유 가스(Free Gas)층 사이의 경계면에서 높은 임피던스 차이로 인한 큰 진폭의 반사파와 위상역전 현상을 관찰할 수 있었다. 그리고 수치모형 실험을 이용하여 획득한 자료에 대하여 수진기와 음원의 거리에 따른 반사계수를 계산하였으며 수치 모델링으로 획득한 인공합성 탄성파기록의 반사계수와 Shuey (1985)의 근사식에 의해 구해진 반사계수의 값이 거의 일치하였다.

• 한국소음진동공학회논문집
• /
• 제18권10호
• /
• pp.1082-1090
• /
• 2008

In this paper, a general solution for the vibrational energy and intensity distribution through a compliant and dissipative joint between plate structures is derived on the basis of energy flow analysis (EFA). The joints are modeled by four sets of springs and dashpots to show their compliancy and dissipation in all four degrees of freedom. First, for the EFA, the power transmission and reflection coefficients for the joint on coupled plate structures connected at arbitrary angles were derived by the wave transmission approach. In numerical applications, EFA is performed using the derived coefficients for coupled plate structures under various joint properties, excitation frequencies, coupling angles, and internal loss factors. Numerical results of the vibrational energy distribution showed that the developed compliant and dissipative joint model successfully predicted the joint characteristics of practical structures vibrating in the medium-to-high frequency ranges. Moreover, the intensity distribution of a compliant and dissipative joint is described.

• 비파괴검사학회지
• /
• 제14권3호
• /
• pp.172-176
• /
• 1994

핀-핑거형 터빈 동익 루트의 사각 초음파탐상에서의 기하신호가 해석된다. 동익루트의 기하가 설명되고, 기하신호가 형성되기 위한 반사조건들이 제시된다. 그리고, 이 기하신호의 빔경로에 관한 일반식들이 유도되고 검증된다. 이 기하신호는 리가먼트 모서리 신호이며, 그 위치와 진폭은 핀홀과 리가먼트의 크기 및 탐촉자의 빔지향 특성으로부터 결정될 수 있다는 것이 보여진다.