• 대한산업공학회지
• /
• 제34권1호
• /
• pp.32-41
• /
• 2008

This paper studies a joint EOQ and EPQ model in which a stationary demand can be satisfied by recycled products as well as newly purchased products. The model assumes that a fixed quantity of the used products are collected from customers and later recovered for reuse. The recovered products are regarded as perfectly new ones. We also assume that the number of orders for newly purchasing items and the number of recovery setups in a cycle can be mutually independent integers. Under these assumptions, we develop an optimization model obtaining the economic order quantity for newly procured products, the optimal lot size for the recovery process, and the sequence of the orders and the setups, simultaneously. And then a simple solution procedure to find a local optimal control parameter set is proposed. To validate the model and the solution procedure, finally, some computational experiments are presented.

• Fibers and Polymers
• /
• 제2권1호
• /
• pp.157-162
• /
• 2001

Dyebath used for metal complex dyeing of nylon microfiber was recycled to reduce the overall amounts of metal complex dyeing effluents. Instead of discharging the dyebath after each dyeing cycle, the residual dyebath was analyzed spectrophotometrically and reconstituted to the required concentration of dyes and auxiliaries. Dyebaths were reused eight times and the CIELAB coordinates of dyed samples were measured after each recycling. Color difference($\Delta$E*) between the sample dyed in the fresh bath and that from reused dyebath was maintained below 1.5. The levelness and fastness of dyed fabrics from recycled dyebath were not impaired either. Chromium content of each recycled dyebath was similar to that of the first residual dyebath.

• 대한안전경영과학회지
• /
• 제10권1호
• /
• pp.205-213
• /
• 2008

Servicizing is defined 'not as to sell the products but as to sell the functions'. This study was done on the methods for revitalization as the object items of navigation & antenna among car parts. The direct door-to-door survey was done for 101 enterprises (direct-management stores) and percentage & t-test were done for statistics. The results can be summarized like followings. First, PR on servicizing is required. Second the optimized methods can be obtained by incorporating reuse & recycling distribution systems of servicizing with the existing recovery system Reuse distribution system can be constructed rationally because inventory control is being done correct1y with the periodic recovery. Finally, as for the analysis on the relative importance of main factors of servicizing, it shows that supports & providing the concrete frame of the government & local autonomous body are important.

• 한국가구학회지
• /
• 제17권1호
• /
• pp.47-54
• /
• 2006

This study focused on designing environment-friendly furnitures by recycling useless stuffs. I designed environment-friendly furnitures by using plastic manekings, which do not decay easily. Designing environment-friendly furnitures by using maneking, we should consider the following; to make our surrounding comfortable and pleasant, to make the appearance of the streets more beautiful, and to consider our future environment. We need to use reusable and recyclable wastes much more to make environment-friendly furnitures from now on.

• International Journal of Internet, Broadcasting and Communication
• /
• 제16권3호
• /
• pp.228-235
• /
• 2024

Battery use is increasing worldwide to achieve carbon neutrality and improve energy efficiency, but batteries are a finite resource and their application is determined by capacity and specifications. Battery performance deteriorates as the number of uses increases. A certain level of battery performance degradation has become an issue in the field of reuse and recycling, and various studies are being conducted on reuse to solve power shortages. Waste batteries from electric vehicles are suitable for building ESS based on reusable batteries, and for stable use, technical skills are needed to accurately predict battery life and determine status information. Predicting battery life and determining status information are difficult due to non-linearity due to internal structure or chemical changes. In this paper, we manufactured a modular internal resistance measuring device and compared the measured values with Hioki equipment to minimize the error rate through a correction method. As a result of testing Hioki equipment and modular measuring instruments to ensure efficiency and safety based on reusable batteries, an accuracy of over 95% was confirmed.

• 한국환경교육학회지:환경교육
• /
• 제11권2호
• /
• pp.130-143
• /
• 1998

This study was conducted as a preliminary step to establish a model for the practical application of environmental education related to food wastes collected from elementary school foodservices. Methods of treatment and present recycling status of food wastes in elementary schools in Kyonggido were surveyed. The consciousness of dieticians who have been serving for elementary school foodservices was also analyzed through the survey questions concerning environmental education for the reduction and recycling of food wastes. The results derived from this survey were as follows: The major portion of food wastes from elementary school foodservices was constituted with vegetables and soup, and an average amount of food wastes per day was highest in June and July. Therefore environmental education related to reduction of wastes was needed in the first semester of school terms, and the possible reduction of food wastes achieved through the proper planning of school foodservice menu was also needed. In most cases food wastes were collected and treated by animal growing farmers or composted by machines in school. In operating composting machines microorganism inoculant was mostly used but dieticians pointed out the problem of a nasty odor, insects, and high energy consumption. This situation means it has not been operated efficiently and suggests an efficiency problem of machine composting in elementary schools because composting itself is based on the aerobic digestion and high temperature fermentation which kills insects and harmful microorganisms. Elementary school dieticians in Kyonggido were aware that food wastes cause main pollution problem, and that food wastes are valuable resources which can be recycled, and recycling of food wastes is inevitable. But more than half of the schools surveyed have not been reused food wastes in school, so a proper model for recycling and reuse of food wastes in school grounds was thought to be needed. Environmental education programs related to food wastes have not been peformed in more than half of the schools surveyed. It was concluded that the following three plans will be helpful to reduce school food wastes. First, environmental education should be enforced, second, teachers' and dieticians' intensive teaching concerning food wastes should be needed, and finally establishment of a model for recycling and reuse of food wastes in school grounds and its application to environmental education would offer a valuable field experience to school students.

• 청정기술
• /
• 제19권4호
• /
• pp.388-392
• /
• 2013

현재 인듐-주석-산화물(Indium-Tin-Oxide, ITO)은 디스플레이 제품에 투명 전극으로 사용된다. 하지만 인듐과 주석의 자원고갈 문제와 ITO 제조 공정에 많은 에너지가 소비되어 최근에는 ITO 대체물질의 개발과 ITO 재사용 및 재활용에 관한 연구가 요구되고 있는 실정이다. 이러한 상황에서 ITO를 재활용 하게 되면 수치상으로 환경부하 값의 변화 추이를 확인하기 위해서는 전과정 평가 기법을 이용한 전과정 평가가 매우 적절하다. 따라서 전과정 평가 수행을 위해 공정상에서 투입물질과 생성물질을 구분하고, 데이터 베이스(DB)를 적용하여 환경성 평가 결과를 영향 범주별로 계산하였으며, 34%를 폐기함에 따라 각각 해당하는 환경부하 값이 계산되었다. 화학당량적으로 ITO의 양을 계산하여 환경부하 값을 결정할 경우, 산성 물질과 자원고갈에 해당하는 값들이 계산되었고, ITO를 1 ton 생산하여 34%를 폐기할 경우 $ 476를 땅에 묻는 결과가 도출되었다.

• 방사성폐기물학회지
• /
• 제5권2호
• /
• pp.91-101
• /
• 2007

본 연구에서는 원전연료 가공시설에서 발생한 콘크리트 폐기물을 자체처분 하기 위란 국내 규제요건을 검토하였고, 매립 및 재활용에 따른 작업자 및 일반인의 방사선학적 위해도를 평가하기 위해 RESRAD Ver. 6.3, RESRAD BUILD Ver. 3.3 전산코드를 사용하여 피폭선량을 평가하였다. 피폭선량 평가 결과에 따라 유도된 처분제한치는 콘크리트 폐기물 매립의 경우 0.1071Bq/g (3.5% 농축우라늄), 재활용의 경우 $0.05515Bq/cm^2$(5% 농축우라늄)이었다. 또한, 자체처분대상 콘크리트 폐기물의 제염 후 잔류방사능을 조사한 결과, 표면오염도는 전체평균이 $0.01Bq/cm^2$(알파방출체), 콘크리트 폐기물 표면에서 채취한 시료의 방사성핵종 분석결과 $^{238}U$은 0.0297Bq/g, $^{235}U$의 농축도는 2w/o 이하였고, 인위적 오염으로 예상되는 $^{238}U$의 농도는 0.0089Bq/g 이었다. 따라서, 자체처분 대상 콘크리트 폐기물의 매립 및 재활용시 일반인 및 작업자에게 미치는 방사선학적 위해도는 원자력관계법령에서 정하는 처분제한치(개인선량 $10{\mu}Sv/yr$, 집단선량 $1man{\cdot}Sv/yr$) 이하임을 확인하였다.

• 대한토목학회논문집
• /
• 제4권4호
• /
• pp.113-125
• /
• 1984

우리 나라는 수공급(水供給)을 주로 댐개발(開發)에 의존(依存)하여 왔으나 이와 같은 방식(方式)은 앞으로 댐적지(適地)의 감소(減少), 건설비(建設費)의 앙등(昻騰), 수몰지역주민(水沒地域住民)의 생활재건대책(生活再建對策), 환경영향(環境影響) 등의 제요인(諸要因)으로 인하여 계속하여 개발(開發)하기 어려운 상황(狀況)에 있다. 한편 수수요(水需要)는 도시(都市)로의 인구집중(人口集中), 생활수준(生活水準)의 향상(向上), 산업발전(産業發展) 등으로 인하여 계속 증가(增加)되고 있으며 앞으로도 인구(人口)의 증가(增加)와 경제활동(經濟活動)의 고도화(高度化)에 따른 도시기능(都市機能)의 향상(向上)에 의해 증가(增加)될 것으로 예상(豫想)된다. 따라서, 앞으로 늘어날 수수요(水需要)에 대처(對處)하기 위해서는 지하수(地下水)의 개발(開發), 해수(海水)의 담수화(淡水化), 그리고 물을 순환재이용(循環再利用)하는 중수도(中水道)의 도입(導入)이 절실(切實)하며 그 연구(硏究) 또한 시급하다. 중수도(中水道)란 종래(從來) 수도(水道)에 의해서 급수(給水)되고 있던 용도(用途)가운데 반드시 음용수(飮用水)와 같은 정도(程度)의 청정(淸淨)을 요(要)하지 않는 용도(用途)에 대(對)하여 각(各) 용도(用途)에 적합(適合)한 수질(水質)의 중수(中水)를 공급(供給)하는 것으로써 사람이 마시기에 적합(適合)하지 않은 물을 공급(供給)하는 시설(施設)의 총체(總體)라고 정의(定義)한다. 이와 같은 중수도(中水道)의 용도(用途)로는 수세식(水洗式) 변소용수(便所用水), 에어컨냉각용보급수(冷却用補給水), 세차용수(洗車用水), 살수용수(撒水用水), 가로청소용수(街路淸掃用水), 조경용보급수(造景用補給水), 소화용수(消火用水) 등을 들 수 있으며, 원수(原水)로는 건물내(建物內)에서 발생(發生)하는 잡배수(雜排水), 수세식(水洗式) 변소용수(便所用水), 냉동냉각배수(冷凍冷却排水), 하수처리수(下水處理水), 오탁하천수(汚濁河川水), 그리고 우수(雨水), 지하수(地下水) 등을 생각할 수 있다. 그러나, 원수(原水)를 선정(選定)할 때는 수질(水質)과 함께 수량(水量)이 풍부(豊富)한가에 대해서도 고려(考慮)하여야 한다. 중수도(中水道)의 형태(形態) 및 분류(分類)는 개방계(開放系) 순환방식(循環方式)과 폐쇄계(閉鎖系) 순환방식(循環方式)으로 대별(大別)되며, 이를 규모(規模)에 따라 개별순환방식(個別循環方式), 지구순환방식(地區循環方式), 광역순환방식(廣域循環方式)의 3 가지로 나눈다. 중수도처리방식(中水道處理方式)은 활성오니법(活性汚泥法), 회전원판법(回轉圓板法), 접촉폭기법(接觸曝氣法)을 포함(包含)한 생물화학적(生物化學的) 처리법(處理法)과 의집심의법(擬集沈擬法), 사려과법(砂濾慮過法), 활성탄처리법(活性炭處理法), ozone 처리법(處理法), 염소처리법(鹽素處理法), 막처리(膜處理) 등을 포함(包含)한 물리화학적(物理化學的) 처리법(處理法)으로 대별(大別)된다. 또한 현재(現在) 외국(外國)에서 실시(實施)하고 있는 중수도(中水道)의 예(例) 조사(調査)하였으며, 중수도이용(中水道利用)의 효과(效果)를 직접적(直接的) 효과(效果)와 부수적(附隨的) 효과(效果)로 나누어 기술(記述)하였다. 또한 중수도(中水道) 개발시(開發時)의 문제점(問題點)을 순환방식별(循環方式別)로 조사(調査)하였으며, 기술(技術), 위생(衛生), 관리상(管理上)의 문제(問題)와 비용문제(費用問題), 법령상(法令上)의 문제(問題)를 다루었다. 중수도(中水道)를 개발(開發)하기 위해 사업자(事業者)(설치자(設置者))와 행정기관(行政機關)의 역할(役割) 중수도(中水道)를 위한 시설(施設)의 구조기준(構造基準) 및 유지관리기준(維持管理基準), 재정적(財政的) 조치(措置) 등에 대해서 연구(硏究)하였다.

• 산업경영시스템학회지
• /
• 제27권1호
• /
• pp.79-92
• /
• 2004

The purpose of this study is to examine the actual condition of environment conscious logistic system which is essential to make material recycling economic society. Environment conscious logistic management which meant simply recycle is tend to promote material reduction, reuse and recycling. We have made case studies about advanced environment friendly logistic system. To examine Korean companies' environment conscious logistic system, we made survey form which is consist of 82 questionnaires and 154 companies have participated for this. And we have analyzed the survey responses. As a result of this study, we propose the way of constructing environment conscious logistic system in Korea.