DOI QR코드

DOI QR Code

A Study on the development and calibration method of a modular internal resistance meter to improve the safety of reusable batteries

  • Received : 2024.06.17
  • Accepted : 2024.06.29
  • Published : 2024.08.31

Abstract

Battery use is increasing worldwide to achieve carbon neutrality and improve energy efficiency, but batteries are a finite resource and their application is determined by capacity and specifications. Battery performance deteriorates as the number of uses increases. A certain level of battery performance degradation has become an issue in the field of reuse and recycling, and various studies are being conducted on reuse to solve power shortages. Waste batteries from electric vehicles are suitable for building ESS based on reusable batteries, and for stable use, technical skills are needed to accurately predict battery life and determine status information. Predicting battery life and determining status information are difficult due to non-linearity due to internal structure or chemical changes. In this paper, we manufactured a modular internal resistance measuring device and compared the measured values with Hioki equipment to minimize the error rate through a correction method. As a result of testing Hioki equipment and modular measuring instruments to ensure efficiency and safety based on reusable batteries, an accuracy of over 95% was confirmed.

Keywords

Acknowledgement

This work was supported by the National Research Foundation of Korea(NRF) grant funded by the Korea government(MSIT) (No. NRF-2022R1G1A1013300).

References

  1. T.H. Chen, T.Y. Hsieh, N.C. Yang, J. S. Yang and C. J. Liao, "Evaluation of advantages of an energy storage system using recycled EV batteries," International Journal of an energy storage systems, Vol. 45, Issue. 1, pp. 264-270, February 2013. DOI: https://doi.org/10.1016/j.ijepes.2012.08.037
  2. S.B. Kim and S.H. Lee, "Design and development of less than 1Kw Lithium rechargeable battery pack," The International Journal of Internet, Broadcasting and Communication, Vol. 10, No. 3, pp. 104-108, October 2018. DOI: https://doi.org/10.7236/IJIBC.2018.10.3.104
  3. S.B. Kim and S.H. Lee, "Design and Development of a Public Waste Battery Diagnostic Device," The International Journal of Advanced Culture Technology(IJACT), Vol. 10, No. 3, pp. 281-286, July 2022. DOI:https://www.earticle.net/Article/A417941
  4. S.B. Kim and S.H. Lee, "Development of Aging Diagnosis Device Through Real-time Battery Internal Resistance Measurement," The International Journal of Internet, Broadcasting and Communication(IJIBC), Vol. 14, No. 2, pp. 129-135, February 2022. DOI: https://doi.org/10.7236/IJIBC.2022.14.2.129
  5. M.J. Choi and S.B. Kim, "A Study on Impedance Change Trend and Battery Life Analysis through Battery Performance Deterioration Factors," The International Journal of Internet, Broadcasting and Communication(IJIBC), Vol. 15, No. 3, pp. 141-146, August 2023. DOI: https://doi.org/10.7236/IJIBC.2023.15.3.141
  6. Y. U. Mun and S. B. Kim,"A study on the prediction of SOH estimation of waste lithium-ion batteries based on SVM model,"IJCC 2023.
  7. S. B. Kim, and S. H. Lee,"Research on Hyper-parameter Optimization Method based on Genetic Algorithm of Deep Neural Network,"O2O IICCC 2020.
  8. M.J. Choi and S.B. Kim, "A Study on The Life Prediction of Lithium Ion Batteries Based on a Convolutional Neural Network Model," The International Journal of Internet, Broadcasting and Communication(IJIBC), Vol. 15, No. 3, pp. 130-133, August 2023. DOI: https://doi.org/10.7236/IJIBC.2023.15.3.130