• Journal of the Korean GEO-environmental Society
• /
• v.12 no.9
• /
• pp.21-25
• /
• 2011

This study was performed to evaluate characteristics of illegally dumped wastes in the riversides of Nakdong river found during dredging of Nakdong river. Precise classification of the wastes found in the riversides is essential to proper treatment of the wastes. We tried to determine whether these wastes contained toxic compounds and stabilized. Wastes were found at 27 sampling points out of 159 segments investigated and these wastes were not classified as toxic wastes. In addition, clay soils were found at 60 sampling points, and these soils were not classified as wastes. Thus, these soils are thought to be recycled as construction materials. Some samples were not stabilized, which means biodegradation was still progressed in these areas.

• Journal of Korea Society of Waste Management
• /
• v.35 no.8
• /
• pp.785-798
• /
• 2018

Since the Framework Act on Resource Circulation was enacted in 2018, the government should establish a National Resource Circulation Master Plan every 10 years, which defines mid- to long-term policy goals and directions on the efficient use of resources, prevention of waste generation and recycling of waste. In addition, we must set mid- to long-term and stepwise targets for the final disposal rate, recycling rate (based on sorted recyclable materials and recycled products), and energy recovery rate of wastes, and relevant measures should be taken to achieve these targets. However, the current industrial waste (IW) statistics have limitations in setting these targets because the final disposal rate and recycling rate are calculated as the ratio of the recycling facility input to the IW generation. In this study, the material flow from the collection stage to the final disposal of industrial waste was analyzed based on the generation of 2016, and the actual recycling amount, actual incineration amount, final disposal amount and their rates were calculated. The effect on the recycling, incineration and final disposal rates was examined by changing the treatment method of nonhazardous wastes from the factory and construction and demolition wastes, which were put in landfills in 2016. In addition, the variation of the waste treatment charge was investigated according to the change of treatment methods. The results of this study are expected to be effectively used to establish the National Resource Circulation Master Plan and industrial waste management policy in the future in South Korea.

• Journal of architectural history
• /
• v.29 no.6
• /
• pp.101-112
• /
• 2020

This study focuses on the construction of Gyeongbokgung Palace in the second year of King Gojong's reign, which has been spotlighted for political and economic history. The author analyzed the contents of wood procurement with the Yeonggeon Diary, which records each day of construction site. The results are as follows: First, the 2nd year of King Gojong's reign, Yeonggeon of Gyeongbokgung Palace, was a new building that reflected the old system and 270 years of changed environment on the existing site. Despite the poor economic conditions, it began with years of effort and voluntary volunteer work and dedication. Second, the priority of timber transport was recruiting people in the whole process and the supply and demand of transportation tools. Carrying lumber from the mountains to the riverside and floating it at the right time were all a matter of manpower. Soldiers and carts were used to carry timber that arrived in Hangang River to the construction site. The cart was a consumable product, so it was necessary to continuously use the wood to make cart at the site. Third, fire and flood were the biggest obstacles to the Yeonggeon schedule of Gyeongbokgung Palace. Especially the fire was fatal. It was difficult to extinguish the fire in temporary structure, where was the storage for wood to construct. These disasters greatly affected the construction cost and construction period. Wood procurements of Gyeongbokgung Palace were based on public offerings. At the same time, recycled materials from other palace wood and nearby houses, nationwide buying of private mountain wood, the logging of royal tombs and some of the buildings of Gyeonghui Palace and Changgyeong Palace were relocated.

• Journal of Korea Foundry Society
• /
• v.41 no.2
• /
• pp.139-143
• /
• 2021

A type of titanium alloy, ferro-titanium, is the main material used to manufacture steel and stainless steel. Considering economic aspects, ferro-titanium ingots are intended to be manufactured using low-cost titanium scrap, and the best pretreatment process for removing impurities from recycled titanium scrap surfaces was studied here. Instead of ordinary acid or organic solvents, ecofriendly methods were researched and applied, and chip scrap materials were used. A high-quality ferro-titanium ingot was manufactured from titanium scrap after a pretreatment process was applied, and the impurities and properties were analyzed and compared with commercial material standards through a component analysis.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.3
• /
• pp.457-462
• /
• 2022

This study is about the case applied of a shallow foundation reinforcement method for a low/mid-rise building where a relatively small load is applied by using a soil stabilized material that utilizes recycled resources. First, laboratory mixing test was conducted for four mixing ratios in order to derive the optimal mixing ratio in the field. Using the derived optimal mixing ratio, it was applied as a shallow foundation for the building in the field. The field application method used a simple process of compaction by the soil mixedure with the original soil and the soil stabilized material in the field. After field application, a plate bearing test was performed on one original ground and two improved ground to confirm the allowable bearing capacity. As a result of checking the bearing capacity, it was found that sufficient bearing capacity was exhibited.Therefore, it was confirmed that it can be used as a shallow foundation for the building.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_2
• /
• pp.1135-1144
• /
• 2023

In this paper, bending strength and permeability tests were conducted on concrete permeable blocks manufactured by recycling industrial by-products of oyster shell and blast furnace slag to measure and compare bending strength and permeability coefficient, and present experimental research results. To this end, a total of 54 specimens with a size of 200x200x60mm for surface layer and base layer were manufactured, and bending strength and permeability test were carried ourt accoridng to KS F 4419. Eighteen types of mixing designs were implemented by varying the mixing and replacement rates of oyster shells and blast furnace slag. As a result of the experiment, the higher the mixing ratio of oyster shell, the lower the bending strength and the permeability coefficient. Thereafter, a total of three permeable blocks with dimensions of 200x200x60mm were manufactured and subjected to bending strength and permeability tests according to KS F 4419. As a result of the test, the bending strength satisfies the standard of KS F 4419, and the permeability coefficient is 12 times higher than the standard of KS F 4419. It seems that the proper mixing of oyster shells and blast furnace slag increases the amount of air, and further research on durability and economic feasibility of materials used to manufacture permeable blocks is required.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.30 no.1
• /
• pp.53-62
• /
• 2024

Molded pulp products has become more attractive than traditional materials such as expanded polystyrene foam (EPS) owing to low-priced recycled paper, environmental benefits such as biodegradability, and low production cost. In this study, various design factors regarding compression and cushioning characteristics of the molded pulp cushion with truncated pyramid-shaped structural units were analyzed using a test specimen with multiple structural units. The adopted structural factors were the geometric shape, wall thickness, and depth of the structural unit. The relative humidity was set at two levels. We derived the cushion curve model of the target molded pulp cushion using the stress-energy methodology. The coefficient of determination was approximately 0.8, which was lower than that for EPS (0.98). The cushioning performance of the molded pulp cushion was affected more by the structural factors of the structural unit than by the material characteristics. Repeated impacts, higher static stress, and drop height decreased the cushioning performance. Its compression behavior was investigated in four stages: elastic, first buckling, sub-buckling, and densification. It had greater rigidity during initial deformation stages; then, during plastic deformation, the rigidity was greatly reduced. The compression behavior was influenced by structural factors such as the geometric shape and depth of the structural unit and environmental conditions, rather than material properties. The biggest difference in the compression and cushioning characteristics of molded pulp cushion compared to EPS is that it is greatly affected by structural factors, and in addition, strength and resilience are expected to decrease due to humidity and repetitive loads, so future research is needed.

• Journal of Soil and Groundwater Environment
• /
• v.29 no.1
• /
• pp.72-83
• /
• 2024

Most of the slags generated from steel-making industry in Korea are recycled into media-contact aggregates such as fill and cover materials. For their use as media-contact aggregates, the slags must meet not only the waste quality criteria, but also the Daphnia magna acute toxicity test criteria. In this study, Korean Leaching Test ES 06150.e (Korea), Japanese Leaching Test JIS K 0058-1(Japan), Detuch Leaching Test DIN 19529 (Germany), Toxicity Characteristic Leaching Procedure (USA) were conducted for batch leaching test of slags from 6 Korean steel-making companies. In addition, Korean Standard up-flow percolation test (ES 06151.1) mimicking field conditions was conducted to assess the impact of the slag leachate on the surrounding environment indirectly. Heavy metals such as Cr⁶⁺ and Zn²⁺ were detected from both extractant and leachate samples, but all of them did not exceed waste quality criteria of each country. However, Daphnia magna acute toxicity tests using the leachate samples from up-flow percolation test with slag alone and slag/natural soil conditions exceeded ecotoxicity standard (TU=2) due to their high pH (11.3-12.5). After neutralizing the pH of the slag leachate to 6.5~8.5, the Daphnia magna mortality and immobilization were reduced to satisfy ecotoxicity standard. As the reducing pH of slag leachate would be extremely difficult, appropriate recycling management considering the physicochemical characteristics of he slags should be stuided further.

• Fashion & Textile Research Journal
• /
• v.26 no.1
• /
• pp.55-64
• /
• 2024

This study investigated the usage and product conditions of clothing companies and online dummy companies for the development of fitting dummy for South Korean women's wear in their 50s and 60s. These women-targeted apparel companies mainly used nude-sized torso type and torso crotch type made of FRP material. The frequency of use of the dummies was high, while the user satisfaction was moderate. Users expressed dissatisfaction with the inaccurate reflection of the body shape according to the KS sizing system and the measurements such as the front and back intercye, upper arms, abdomen, crotch, and waist back length. Upon survey, 73.7% of the respondents answered that development of the dummy and the appropriate age for it is 50 to 54, and they preferred the torso crotch form. In the production of online dummy companies, the torso crotch type and torso type were most widely produced, and polyurethane, FRP, and recycled paper materials were used. The size of dummy was expressed in numerical type, and 6, 7, 8, 9, 10, 12, 14, 16, 18 and 44, 55, 66, 77, 88 were being produced. Even models of the same size had significant deviation, especially in the waist circumference. Also, there was no dummy reflecting 25%~75% center interval to the KS garment sizing standards of women in their 50s and 60s. Therefore, it is desperately necessary to develop a fitting dummy for KS clothing sizing system that reflect their body sizes and shapes.

• Journal of Korean Home Economics Education Association
• /
• v.15 no.4
• /
• pp.115-132
• /
• 2003

The purpose of this study is aimed at giving proof that helps the elementary practical arts education system accomplish as the effects are turned out experimentally. Two classes of the sixth grade of J elementary school in Dae-gu have been selected in order to be experimented. One was chosen as an experimental group, the other was done as a comparative group. The creative-problem-solving learning-model was applied to the experimental group, and the traditional way of teaching was applied to the comparative group. For four classes of the sixth grades, ‘chapter 8: Making with recycled materials’ was proceeded as the content. Then. tests about the way of environmental awareness and creativity were carried out twice. After that, the results of pre and after-test in the comparative and experiment groups were compared using the t-test method. Following the analysis of the data collected in this study. the following major observations were obtained: First, children who were educated the creative problem-solving in a practical arts education achieved higher scores than before. Therefore, it turns out that the CPS method is an effective way to improve the environmental awareness in children. It showed that it included lots of daily habits connected with daily life and it made the intention to carry out the environment-preservation stronger and children´s attitude towards the environment improved. Moreover, making with recycled materials was used to solve an environmental problem, affecting in a positive way in our life. It also made the positive recognition about the environment. Second. the application of the creative problem-solving class of the practical arts education can make positive results to children. It helped children to have more interest in the environment around them. Children´s fluency, flexibility and originality in their ideas were improved as much as possible while they were solving problems. Consequently, the application of the creative problem-solving class model of elementary practical arts environmental education lets children expand environment consciousness and creativity.