• Journal of Korea Technology Innovation Society
• /
• v.15 no.3
• /
• pp.700-721
• /
• 2012

This paper deals with methods for determining the reasonable royalty rates in the valuation of patents. To calculate the reliable reasonable royalty rate of a patent, we review pros and cons of the 25% rule royalty calculating method and the recent trend of this method. We also review the game theory of Nash Bargaining equation and review the Investment of Rate of Return Method according to the financial analysis. Next, we refer to the reasonable royalty damage cases among the recent patent infringement cases in USA and analyze the corresponding patents. We extract the patent indicators from the patent bibliographic information. Finally, we obtain a regression model for calculating a reasonable royalty rate using the patent indicators and the reasonable royalty rates in the recent patent infringement cases.

• Journal of Advanced Marine Engineering and Technology
• /
• v.11 no.3
• /
• pp.31-44
• /
• 1987

Nowadays, the problems of energy and environmental pollution become serious day by day and the diesel engine, which has been proved to be superior to gasoline engine with respect to fuel consumption and ecological problems of exhaust gas, has been adopted widely for various purposes from the marine diesel engine and the dynamo engine to all kinds of engine on land. Therefore, extensive parametric studies on combustion of diesel engine should be done for its desing and improvement. To predict the behavior of diesel engien according to variable operating conditions by means of cycle simulation, the reasonable pattern of heat release rate has to be asumed. But it is necessary to know the actual variation of heat release rate in order to assume the reasonable pattern of heat release rate according to the actual operating conditions. In this paper, on a high speed small bore diesel engine with pre-combustion chamber, experimental investigations were carried out to determine the relationship between the heat release pattern and parameters such as engine load and speed. And also, the theoretical investigations about the performance variations of the above diesel engine according to the predicted pattern of heat release rate variation were performed. From the above observations, it may be said that the Fanboro indicator, which was used to get the cylinder pressure, can be used to estimate a reasonable pattern of heat release rate and it is confirmed that the pattern of heat release rate for the pre-combustion type engine is different from that of the direct injection type engine.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5D
• /
• pp.719-726
• /
• 2011

The government intensifies screening criteria for the guarantee of reasonable bidding price and the prevention of low bidding price, however, the low tender rate still becomes an issue. This study analyzed the problems of screening criteria for the guarantee of reasonable bidding price, and then derived some major issues such as the restriction of decisive factors for initial construction cost, the rate of activities over five percent of surveyed price and the restrictive review criteria of inadequate activities. To solve thess problems, this study suggests an improved process model for estimating optimal bidding rate that can select a contractor with the guarantee of reasonable bidding price.

• Journal of the Korean Society of Safety
• /
• v.22 no.5
• /
• pp.33-40
• /
• 2007

Standard safety management costs can not be applied to each site with same rate, it is very difficult, because it depends on the experience, work method, work kind, work progress schedule, and hazard level of each construction company. Therefore, this study is to find out hazard level of each work kinds through questionnaire and interview and investigate analyze the status which standard safety management costs have been used. Also, this study is to show reasonable rates of standard safety management costs in construction industry and to set up countermeasures against those problem after reviewing its status in korea with in Japan and Europe. This study is to investigate eleven project kinds of domestic system, first, and to investigate eleven items of apartment bldg, office. Also this study is to investigate and analyze performed costs of presently processing worker finished work so that it shows a new reasonable rate against standard safety management costs in construction industry, in order to make basical data and material to be systemized.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.1
• /
• pp.119-125
• /
• 1999

The distribution of fatigue crack growth rate is subjected to the measuring interval and calculated method of growth rate. In this paper, in order to establish the method of determining the distribution of fatigue crack growth rate, which ignores those influences, a series of fatigue crack growth experiments and measuring intervals of crack length calculated reasonable are presented. The main conclusions obtained are summarized as follows: 1) As a result of the ΔP constant test and ΔK constant test, it is thought that an approximate measuring interval of 0.3~0.7mm is reasonable, which allows for few errors and is little subjected to the calculated method of crack growth rate. 2) After generally comparing the error estimation by using the experimental data of CCT specimen with the error rating of the CT specimens, it is possible that the fatigue test has few errors within the measuring interval, ξ(Δa/W)=0.0067~0.017, regardless of the dimension of specimen geometry.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.03a
• /
• pp.251-257
• /
• 1998

The distribution of fatigue crack growth rate is subjected to the measuring interval and calculated method of growth rate. In this paper, in order to establish the method of determining the distribution of fatigue crack growth rate, which ignores those influences, a series of fatigue crack growth experiments and measuring intervals of crack length calculated reasonable are presented. The main conclusions obtained are summarized as follows: 1) As a result of the ΔP constant test and ΔK constant test, it is thought that an approximate measuring interval of 0.3~0.7mm is reasonable, which allows for few errors and is little subjected to the calculated method of crack growth rate.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.38 no.6
• /
• pp.384-393
• /
• 2012

The trigeminal nerve, one of the cranial nerves, innervates the maxillofacial area and has three branches: the ophthalmic, maxillary, and mandibular nerves. Paresthesia, due to damages to the inferior alveolar nerve and mental nerve (branches of the mandibular nerve), is quite frequent in dental implants and third molar extractions. As medical disputes are increasing, it is necessary to formulate an objective and reasonable disability evaluation. When evaluating the frequent rate of impairment for inferior alveolar nerve damage, it may be reasonable to follow the criteria for the rate of maxillofacial impairment of the American Association of Oral and Maxillofacial Surgeons (AAOMS) - the most scientific and reputable criteria based on the American Medical Association (AMA). Therefore, the Committee of Guides for Maxillofacial Impairment Ratings, in the Korean Association of Oral and Maxillofacial Surgeons (KAOMS), is trying to suggest more reasonable and realistic guidelines for evaluating impairments by reviewing the current evaluation criteria and those of AMA and AAOMS.

• Journal of the Korean Society of Safety
• /
• v.7 no.2
• /
• pp.5-13
• /
• 1992

If zero-accident movement is to be successful, the objective goal period should be surely obtainable, and much more in our country where frequency rate of injury are remarkably fluc-tuating. However In our country, as far as we know, no method to establish a reasonable zero-accident goal period is guaranteed. In thls paper, a new establishing-method of reasonable goal period for individual industry with considering recent accident trend is presented. A mathematical model for industrial accidents generation was analyzed, and a stochastic process model for the accident generation inteual was formulated. This model could tell the accident generation rate in future by understanding the accident tendency through the time-series analysis and search for the distribution of numbers of accidents and accident interval. On the basis of this, the forecasting method of goal achievement probability by the size and the establishment method of reasonable goal period were developed.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.4
• /
• pp.1090-1108
• /
• 2013

Recently national technology commercialization policy using the outcomes of public R&D has been promoting the activities of technology transfer and licensing. Firms also are considering licensing strategies to make great strides and strengthen their future competitiveness. In the licensing deals, objective and reasonable royalty determination is required to be accepted for both negotiation parties. This study analyzed the appropriate royalty range for various types of business and established three royalty influential factors with ten valuation items to explain royalty difference. This study suggested new method to estimate rationally reasonable running royalty rate, combining the appropriate royalty range from classic 25% rule and the result evaluated from royalty influential factors. The adequacy of royalty range from classic 25% rule is confirmed because its range is similar to that of royalty of transfer cases. The final estimate of running royalty can be made from linear function for royalty determination using the results of royalty range and royalty influential factors. This method suggested here is expected to practically useful to determine an appropriate running royalty rate for licensing negotiation.

• Journal of the Society of Disaster Information
• /
• v.20 no.2
• /
• pp.293-301
• /
• 2024

Purpose: Ministry of Environment statistics reveals more than 132 fire·explosion accidents in South Korea between 2014 and 2023. Among them, fire and/or explosion accidents are very impactive in their scale and consequence. This study aims to suggest a new method of reasonable way to calculate the ventilation rate of indoor facility handling hazardous chemicals based on their inflammability. Method: A new method to calculate the ventilation rate is based on the physicochemical properties of the chemicals handled, which is more reasonable compared with the current regulation based only on the floor area of the facility. Result: Considering the physicochemical properties, 178 chemicals based on their inflammability were studied and 168(94%) met the criteria for the current regulation. Some materials have been shown to require too much or too little ventilation rate. Conclusion: Through this study, a reasonable method of calculating the required ventilation rate was proposed. This should be applied to ensure the safety of workers to deal chemicals.