• Korean Chemical Engineering Research
• /
• v.55 no.2
• /
• pp.180-189
• /
• 2017

Pharmaceutical co-crystals primarily to improve the solubility as well as stability of insoluble drug are to be investigated more intensively for IMDs as US FDA has reclassified co-crystal as a special case of solvates in August this year. In this study, we proposed a mechanism of indomethacin-saccharin co-crystal formation and the creation of transient indomethacin meta-stable form using in-line monitoring tools with the addition rate of anti-solvent as a critical process parameter. Among various instruments, we combined PVM (particle vision measurement) and FBRM (focused beam reflectance measurement) for the in-line monitoring of anti-solvent co-crystallization process. The off-line characterization of resulting powders was carried out employing the PXRD (powder x-ray diffraction) and DSC (differential scanning calorimeter). It was observed that the pathway to the final IMC-SAC co-crystal was significantly dependent upon the anti-solvent addition rate. The process conditions to obtain high quality co-crystal powder effectively were established. Consequently, we concluded that in-line monitoring combing the PVM and FBRM should be useful for the in-line monitoring of pharmaceutical co-crystallization processes.

• Resources Recycling
• /
• v.24 no.2
• /
• pp.46-54
• /
• 2015

In this study, an applicability of thermal pretreatment for primary and secondary sludge, which are generated in a sewage treatment plant, was evaluated. The efficiency and charateristics was investigated with each sludge after pretreatment under the condition of $100{\sim}220^{\circ}C$ for 30 minutes. As the result, it was found that $SCOD_{Cr}$, $NH_4{^+}$, VFAs concentrations increased as the pre-treatment temperature increased. For COD solubilization, it was also highly dependent on an increase of temperature resulting in acceleration on hydrolysis and acid fermentation. In the BMP (Biochemical Methane Potential) experiment, for the primary sludge, it showed the higher biogas production rate at a temperature of $220^{\circ}C$, however, the effect was insignificant (5.6%). Whereas, for the secondary sludge, the increase on biogass production rate was 38.8% ($180^{\circ}C$) and this means that the secondary sludge is more suitable for an applicability of thermal pretreatment.

• KSBB Journal
• /
• v.16 no.4
• /
• pp.389-397
• /
• 2001

The effect of sludge digestion on the leaching efficiency of heavy metals from sludge by bioleaching with Thiobacillus thiooxidans MET was investigated. The used sludges were a non- and anaerobically digested. The leaching efficiency of heavy metals was strongly dependent on the pH of the sludge solution rather than the sludge condition and stolid concentration. The lower the pH the more heavy metal was leached from 3.0 of pH. The sequent orders of leaching heavy metals were Zn, Cu, and Cr. Although the buffering capacity of non-digested sludge was similar to anaerobically digested sludge, the pH decrease rate of the anaerobically digested sludge solution was faster than that of the non-digested sludge solution due to the higher sulfur oxidation rate of T. thiooxidans MET in the anaerobically digested sludge. The amount of leached heavy metals from the anaerobically digested sludge showed higher than that of non-digested sludge at the same pH value. This result might be caused by the difference of the insoluble metal types, which were contained in the sludge. An increase in sludge solids concentration decreased the leaching efficiency of heavy metals in the range of solids concentration 10 g/L to 70 g/L. The optimum ratio of S° to sludge stolid was 0.1 in both the sludge. The bioleaching process of heavy metals with T. thiooxidans MET showed the disinfecting effect over 90% as well as the reduction effect in sludge weight of 20%.

• Korean Chemical Engineering Research
• /
• v.46 no.4
• /
• pp.783-791
• /
• 2008

The dynamic characteristics of adsorption using an adsorption bed packed with Li-X zeolite (UOP) were studied through the breakthrough experiments of $H_2/CH_4$ (90:10 vol%), $H_2/CO$ (90:10 vol%) and $H_2/CO_2$ (80:20 vol%) mixtures. Effects of feed flow rate (6.24~10.24 LPM) and adsorption pressure (6.1 bar~10.1 bar) in the Li-X zeolite bed with 2.7 cm of inside diameter and 80 cm of bed length were observed. The smaller feed rate or the higher operating pressure, resulted in the longer of the breakthrough time and the breakthrough curve have tailing due to temperature variance in the bed. The adsorption dynamics of the Li-X zeolite bed were predicted by using LDF model with feed flow and pressure dependent diffusivity. The prediction and experimental data were analyzed with a nonisothermal, nonadiabatic model, dual-site langmuir (DSL) isotherm

• YAKHAK HOEJI
• /
• v.41 no.6
• /
• pp.802-816
• /
• 1997

In order to investigate the pharmacological properties of New Woohwangehungsimwon Pill (NWCH). Effects of Woohwangehungsimwon Pill (WCH) and NWCH were compared using various experimental models. In isolated rat aorta, NWCH and WCH showed the relaxation of blood vessels in maximum contractile response to phenylephrine ($10^{-6}$M) without regard to endothelium containing or denuded rings of the rat aorta. Furthermore, the presence of the inhibitors of NO synthase and guanylate cyclase did not affect significantly the relaxative effects of NWCH and WCH. NWCH and WCH inhibited the vascular contractions induced by acethylcholine, prostaglandin endoperoxide or peroxide in a dose-dependent manner. In conscious spontaneously hypertensive rats(SHRs), NWCH and WCH decreased significantly heart rate. These, at high doses, had a negative inotropic effect that was a decrease of LVDP and (-dp/dt)/(+dp/dt) in the isolated perfused rat hearts, and also decreased the contractile force and heart rate in the isolated rat right atria. In excised guinea-pig papillary muscle, these had no effects on parameters of action potential at low doses, whereas inhibited the cardiac, contractility at high doses. Furthermore, these had a significant inhibitory effects on heart acceleration in normotensive rats and SHRs. These results suggested that NWCH and WCH have weak cardiovascular effects, and that there is no significant differences between two preparations.

• Korean Journal of Ichthyology
• /
• v.25 no.1
• /
• pp.1-8
• /
• 2013

Rockfish, Sebastes schlegeli (total length; $10.36{\pm}0.49cm$, total weight; $16.28{\pm}1.86g$, N; 290) were exposed to various concentrations of naphthalene for 28 days. Exposure concentrations of naphthalene established control, ethanol (solvent) control, 0.5, 1.0, 1.5 and 2.0 mg Nap $L^{-1}$. After exposure, We observed survival rate, and degree of tissue change (DTC) in gill under optical microscopy. Survival rate of the rockfish was more than 90% in control, ethanol control, 0.5 and 1.0 mg Nap $L^{-1}$, whereas it decreased in 1.5 and 2.0 mg Nap $L^{-1}$ (respectively 80%, 62.2%). In histological observation of gill, hyperplasia of epithelial cells observed in all exposure groups. But no showed increase of DTC which was related to concentration. Whereas, DTC at fusion of gill lamellar, lamellar telangiectasia, stasis, aneurysm and necrosis showed dose dependent increase. Especially, fusion of gill lamellar, lamellar telangiectasia and stasis observed at more 1.0 mg Nap $L^{-1}$, and aneurysm and necrosis at more 1.5 mg Nap $L^{-1}$. These results showed naphthalene caused survival and severe change to the gill of the rockfish which was related to exposure concentration.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.3
• /
• pp.96-106
• /
• 2014

Necessarily traffic policies have been biased in car than pedestrian, so pedestrian's environment is getting worse. Result of this situation our accident rate is high as 36.4%, compared to OECD member countries with average rate of 17.8%(in 2009). Increasing interest for pedestrians environment improvement, and it make an effort to build environment to guarantee walk and safety of pedestrians. Analysis on the binary logistic regression(BLR) was used. The dependent variable is occurring from the road width of less than 9m accident, and independent variable extracted can be obtained from the traffic accident data. Traffic accident on roads having width of less than 9 meters affecting variables is when the driver is straight, when the driver is female, when the pedestrian is walk driveway, and so on. To prevent it, efforts is demanded to protect handicapped, to build safe pedestrians environment using C-ITS and to decrease speed of going straight vehicle on roads having width of less than 9 meters.

• Korean Journal of Agricultural Science
• /
• v.22 no.1
• /
• pp.103-109
• /
• 1995

The model foods were prepared by simulating mositure, protein and starch, and they were heated for 30 mins, at $80^{\circ}C$ and then cooled at $25^{\circ}C$ in water bath. Their rheological properties were investigated by the use of Brookfield wide-gap rotational viscometer at $30{\sim}60^{\circ}C$, and the rotation speed ranged from 0.6 to 6 rpm and solid content ranged from 8% to 11%, the results obtained were as follows. 1. All the model foods ($P_1S_3$, $P_2S_2$, $P_1S_1$, $P_2S_1$, $P_3S_1$, $P_4S_0$) exhibited pseudoplastic behaviors with yeild stress and were thixotropic foods which showed time - dependent structural decays, but the starch food of 8 ~ 11 % solid content did not show the flow behavior. 2. The correlation between the rheological parameters and the protein content of model foods in various moisture content did not appeared a constant relationship. 3. The change of shear stress against shear rate in high starch foods was larger than that in high protein foods and the structure at initial shear time was decayed with a quatic equation according to the Tiu's Model and structural decay was in parallel with the increase of shear rate. 4. The temperature dependency of the apparent viscosity of $P_1S_2$, and $P_2S_1$ was fully expressed by Arrhenius equation and activation energies of their food were 2.35 and $1.34Kcal/g{\cdot}mol$, respectively.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.23 no.1
• /
• pp.81-94
• /
• 2010

This paper deals with the fracture simulation of UHPFRC girder with the interface type model. Based on the existing numerical simulation of quasi-brittle fracture in normal strength concrete, constitutive modeling for UHPFRC I-girder has been improved by including a tensile hardening at the failure surface. The finite element formulation is based on a triangular unit, constructed from constant strain triangles, with nodes along its sides and neither at the vertex nor the center of the unit. Fracture is simulated through a hardening/softening fracture constitutive law in tension, a softening fracture constitutive law in shear as well as in compression at the boundary nodes, with the material within the triangular unit remaining linear elastic. LCP is used to formulate the path-dependent hardening-softening behavior in non-holonomic rate form and a mathematical programming algorithm is employed to solve the LCP. The piece-wise linear inelastic yielding-failure/failure surface is modeled with two compressive caps, two Mohr-Coulomb failure surfaces, a tensile yielding surface and a tensile failure surface. The comparison between test results and numerical results indicates this method effectively simulates the deformation and failure of specimen.

• Korean Journal of Materials Research
• /
• v.11 no.6
• /
• pp.465-471
• /
• 2001

The effect of sintering condition on the mechanical properties and leachability of polydispersed ceramic core body made by gel-casting process in aqueous medium have been investigated. The polydispersed ceramic slip that has low viscosity($\leq$1000cP, at 1000cP (at $50sec^{-1}$ ) and high solid loading(50vo1%) was obtained. The green bodies were fabricated through casting and gelation at room temperature followed by drying at $25^{\circ}C$for 48hrs under relative humidity of 80%. Crack-free green body was successfully fabricated through the above process. The strength at room temperature, apparent bulk density, and shrinkage of the ceramic core body increased propotionally with increasing sintering temperature(1100~150$0^{\circ}C$). However, porosity of the ceramic core body showed relatively low vague. Leaching rate of sintered core body increased with increasing porosity of the sintered body, and was significantly dependent upon the concentration of alkali caustic solution at the same leaching temperature.