• 한국전기전자재료학회논문지
• /
• 제17권7호
• /
• pp.708-712
• /
• 2004

Shallow $p^+-n$ junctions were formed by ion implantation and dual-step annealing processes. The dopant implantation was performed into the crystalline substrates using BF$_2$ ions. The annealing was performed with a rapid thermal processor and a furnace. FA+RTA annealing sequence exhibited better junction characteristics than RTA+FA thermal cycle from the viewpoint of junction depth and sheet resistance. A new simulator is designed to model boron diffusion in silicon. The model which is used in this simulator takes into account nonequilibrium diffusion, reactions of point defects, and defect-dopant pairs considering their charge states, and the dopant inactivation by introducing a boron clustering reaction. Using initial conditions and boundary conditions, coupled diffusion equations are solved successfully. The simulator reproduced experimental data successfully.

• 열처리공학회지
• /
• 제30권4호
• /
• pp.151-155
• /
• 2017

The ZTO single layer and ZTO/Ag/ZTO tri-layer films were deposited on glass substrates by using the radio frequency (RF) and direct current (DC) magnetron sputtering and then rapid thermal annealed (RTA) in a low pressure condition for 10 minutes at 150 and $300^{\circ}C$, respectively. As deposited tri-layer films show the 81.7% of visible transmittance and $4.88{\times}10^{-5}{\Omega}cm$ of electrical resistivity, while the films annealed at $300^{\circ}C$ show the increased visible transmittance of 82.8%. The electrical resistivity also decreased as low as $3.64{\times}10^{-5}{\Omega}cm$. From the observed results, it is concluded that rapid thermal annealing (RTA) is an attractive post-deposition process to optimize the opto-elecrtical properties of ZTO/Ag/ZTO tri-layer films for the various display applications.

• 한국전기전자재료학회논문지
• /
• 제29권1호
• /
• pp.11-16
• /
• 2016

The conduction behavior and electron concentration change in a-IGZO thin-films according to the RTA (rapid thermal annealing) were studied. The electrical characteristics of TFTs (thin-film-transistors) annealed by different temperatures were measured. The sheet resistance, electron concentration, and oxygen vacancy of a-IGZO film were measured by the four-point-probe-measurement, hall-effect-measurement, and XPS analysis. The RTA process increased the driving current of IGZO TFTs but the VTH shifted to the negative direction at the same time. When the RTA temperature is higher than $250^{\circ}C$, the leakage current at off-state increased significantly. This is attributed to the increase of oxygen vacancy resulting in the increase of electron concentration. We demonstrate that the RTA is a promising process to adjust the VTH of TFT because the RTA process can easily modify the electron concentration and control the conductivity of IGZO film with short process time.

• 마이크로전자및패키징학회지
• /
• 제15권4호
• /
• pp.1-7
• /
• 2008

본 실험에서는 두가지 리플로 시스템에 따라 솔더 범프 내에 생성되는 금속간 화합물의 성장거동에 대하여 연구하였다. 산화막이 증착된 Si 기판 위에 직류 마그네트론 스퍼터링을 이용하여 Ti(50 nm), Cu($1{\mu}m$), Au(50 nm), Ti(50 nm)의 박막을 형성한 후, 전해 도금을 이용하여 $5{\mu}m$두께의 Cu 범프와 $20{\mu}m$ 두께의 Sn 범프를 형성하였다. 급속열처리장치(RTA)와 일반 리플로를 이용하여 전해 도금으로 형성된 Sn($20{\mu}m$)/Cu($5{\mu}m$) 범프를 동일한 온도에서 각각 리플로 공정을 진행한 결과, 급속열처리장치를 이용하여 리플로를 할 때, 플럭스를 사용하지 않고 범프로 형성할 수 있었으며, 솔더 계면에 형성된 금속간 화합물이 일반 리플로의 경우보다 더 얇게 형성되었다.

• Applied Science and Convergence Technology
• /
• 제26권6호
• /
• pp.208-213
• /
• 2017

Flexible opto-electronic devices are developed on the insulating layer deposited stainless steel (STS) substrates. The silicon dioxide ($SiO_2$) material as the diffusion barrier of Fe and Cr atoms in addition to the electrical insulation between the electronic device and STS is processed using the plasma enhanced chemical vapor deposition method. Noble silver (Ag) films of approximately 100 nm thickness have been formed on $SiO_2$ deposited STS substrates by E-beam evaporation technique. The films then were annealed at $650^{\circ}C$ for 20 min using the rapid thermal annealing (RTA) technique. It was investigated the variation of the surface morphology due to the interaction between Ag films and $SiO_2$ layers after the RTA treatment. The results showed the movement of Si atoms in silver film from $SiO_2$. In addition, the structural investigation of Ag annealed at $650^{\circ}C$ indicated that the Ag film has the material property of p-type semiconductor and the bandgap of approximately 1 eV. Also, the films annealed at $650^{\circ}C$ showed reflection with sinusoidal oscillations due to optical interference of multiple reflections originated from films and substrate surfaces. Such changes can be attributed to both formation of $SiO_2$ on Ag film surface and agglomeration of silver film between particles due to annealing.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1268_1269
• /
• 2009

This work shows the effect of rapid thermal annealing (RTA) on properties of indium-zinc oxide (IZO) thin films. The RTA temperatue was controlled between 300 and $500^{\circ}C$ under the two different ambient conditions such as vacuum and oxygen. Structural, optical, and electrical properties of IZO films were characterized in terms of RTA conditions. XRD and resistivity measurements showed that crystallization for IZO films occurred at an RTA temperature of about $400^{\circ}C$. For the IZO film treated at $500^{\circ}C$ of RTA, the resistivity, carrier concentration, hall mobility, and transmittance were approximately $10^2{\Omega}cm$, $10^{15}cm^{-3}$, $10cm^2/V{\cdot}s$, and 85%, respectively, which would be suitable for its application to the channel layer in transparent thin film transistors.

• 한국결정성장학회지
• /
• 제10권1호
• /
• pp.42-47
• /
• 2000

일반적인 쵸크랄스키(CZ)방법으로 성장된 실리콘 단결정봉(Ingot)을 가공하여 경면 연마한 후 RTA법으로 수소 분위기에서 열처리하여 실리콘 웨이퍼 표면 및 표면 근처의 특성 변화에 대하여 고찰하였다 수소 열처리를 통하여 표면의 COP (결정결함)가 현저히 감소하는 것을 확인하였고 깊이 5um까지의 영역에서도 결정결함의 밀도가 감소하였다. 또한 수소 열처리에 의해 실리콘 웨이퍼 표면이 에칭 및 실리콘의 재배열에 의해 형성되는 테라스(Terrace) 형태도 관찰되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.500-501
• /
• 2005

Aluminum doped zinc oxide films (ZnO:Al) were deposited on glass substrate by DC magnetron sputtering from a ZnO target mixed with 2 wt% $Al_2O_3$. The effects of substrate bias on the electrical properties and film structure were studied. Films deposited with positive bias have been annealed at $600^{\circ}C$ using rapid thermal anneal (RTA) process. The effects of RTA on the evolution of film microstructure are to be also studied using X-ray diffraction, transmission electron microscopy, and atomic force microscopy. Positive bias sputtering may induce lattice defects caused by electron bombardments during deposition. The as-deposited film microstructure evolves from the film with high defect density to more stable film condition. The electrical properties of the films after RTA process were also studied and the results were correlated with the evolution of film microstructures.

• 한국세라믹학회지
• /
• 제37권5호
• /
• pp.425-431
• /
• 2000

Cobalt ferrite thin films on Corming glass substrate were fabricated by a sol-gel method. Cobalt ferrite thin films with the grain size of 20-35 nm and thickness of 50nm were obtained. Rapid thermal annealing (RTA) and Annealing processes were adopted for comparison of characteristics of the films. Coercivity values were changed with thermal condition and magnetization values were increased as a function of soaking time. With prolonged soaking time, however, it was decreased because of the diffusion of cations from the glass substrate. The RTA process in preparation of cobalt ferrite thin film was the effective way to prevent and to form a single spinel phase in reduced soaking time. The film heated at 600$^{\circ}C$ for 30 minutes by RTA had coercivity of 2,600 Oe, saturation magnetization 460 emu/㎤, and Mr$.$$\delta$ of 1.43 memu/$\textrm{cm}^2$.

• 한국자기학회지
• /
• 제25권2호
• /
• pp.47-51
• /
• 2015

이 연구에서는 DC스퍼터링(DC Magnetron Sputtering)방식으로 제작 된 MgO 터널 장벽층을 갖는 자기터널접합을 급속 열처리 방식(Rapid Thermal Annealing)을 이용하여 열처리 공정 중의 구조적, 조성적 변화 및 스핀 수송 특성의 변화를 연구하였다. 본 연구를 통하여 급속 열처리 방식이 기존 일반적인 열처리 방식에 비하여 높은 터널링자기저항비를 얻을 수 있다는 것을 발견하였다. 또한, 열처리 시간의 단축을 통하여 Mn, Ta, Ru 등의 내부물질의 인접한 층으로의 확산을 억제할 수 있다는 것을 알 수 있었다. 유의미한 데이터를 수집하기 위하여 다양한 열처리 온도 조건과 시간조건에서 급속 열처리를 실시 한 후 자기 터널 접합의 전, 자기적 특성을 관찰하였다. 이러한 특성 변화는 향후 보다 우수하고 안정적인 자기적 특성과 열적 안정성을 갖는 자기터널접합 제작을 위해 다양하게 응용될 수 있다고 생각된다.