• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.57
• /
• pp.283-303
• /
• 2013

When a trade conflict arises related to an officially supported export credit programme, The World Trade Organization(WTO), decides on whether the programme is a forbidden subsidy stipulated in the Agreement on Subsidies and Countervailing Measures(the ASCM Agreement). Korea was taken to the WTO panel two times for the export credit programme. One is the semiconductor case in 2002 and the other was the shipbuilding disputes in 2004. And, In 2012, the U.S. Commerce Department ruled K-SURE's export insurance for Korean refrigerator manufacturers as a forbidden subsidy even if the case was not taken to the WTO. This paper examines the significance of export credit programmes on the WTO ASCM Agreement and discusses how to operate these programmes so they would not infringe upon the Agreement by analyzing the actual cases of WTO subsidy conflicts that involved Korean enterprises in relation to export credit programmes for the purpose of determining the related issues and impacts. From this research the results were as follows: First, on whether export credit is a prohibited subsidy, the deciding factor was whether a benefit has been conferred to the beneficiary. On the presence of a benefit, the WTO panel used market benchmarks as the main criteria. Thus, official export credit agencies(ECAs) should be careful not to provide export credit support which had been granted to the beneficiary at better than market terms. Second, in the case of export credit, the special status of ECA as a public body receiving government support itself does not constitute a subsidy. However, caution must be taken not to provide export credit that may lead to WTO ASCM subsidy conflicts involving a certain exporter or industry by setting up clear and valid regulations and fair work processes in the operation of export credit programmes. Third, item (j) of Annex I cannot be interpreted reversely as this item is for interpreting the presence of a prohibited subsidy, not the presence of a benefit. Thus, an export credit program that confers a financial contribution, a benefit and specificity, could qualify as a prohibited subsidy. Fourth, ECAs not only have to maintain long-term account balance but also introduce additional measures to meet this long-term balance such as a clear and systematic premium system. Finally, export credit programmes that are not defined in item (j) of Annex I of the ASCM Agreement would not deemed as an prohibited export subsidy as long as the continued support of the programmes are not being forced.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.16
• /
• pp.6829-6835
• /
• 2014

Chemotherapy is the primary therapy for malignant lymphoma (ML). However, the clinical outcome is still far from satisfactory. Consequently, an understanding of the mechanism of modulating cancer cell invasion, migration and metastasis is important for the development of more effective chemotherapeutic agents. FNC, 2'-deoxy-2'-${\beta}$-fluoro-4'-azidocytidine, a novel cytidine analogue, has demonstrated significantly inhibitory effects on proliferation of several non-Hodgkin lymphoma (NHL) cell lines. A previous study indicated that FNC effectively inhibited the growth of Raji and JeKo-1 cells in dose-time dependent effects with $IC_{50}$ values of $0.2{\mu}M$ and $0.097{\mu}M$, respectively. This study was focused on investigating the anti-invasive properties of FNC on NHL cells and its potential mechanisms of action. Cell adhesion and transwell chamber assays were utilized to investigate the anti-invasive effects of FNC on Raji and JeKo-1 cells. Real-time PCR and Western blotting were employed to qualify the expression of ${\beta}$-catenin, the glycogen synthase kinase-3 beta (GSK-$3{\beta}$), E-cadherin vascular endothelial growth factor (VEGF), matrix metalloproteinase-2 (MMP-2) and matrix metalloproteinase-9 (MMP-9). The results revealed that FNC remarkably inhibited the adhesion, migration and invasion of two human aggressive non-Hodgkin lymphoma cell lines in a dose dependent manner. Furthermore, ${\beta}$-catenin, MMP-2, MMP-9, VEGF mRNA and protein levels were decreased after FNC treatment, while GSK-$3{\beta}$ and E-cadherin increased. Our studies thus provide evidence and a rationale that FNC may offer an effective chemotherapeutic agent by regulating the invasion and metastasis of aggressive non-Hodgkin lymphoma via inhibition of the Wnt/${\beta}$-catenin signaling pathway.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.8 no.2
• /
• pp.132-146
• /
• 2001

Purpose: This study was to analyze the trends and content of all the research (171 research papers) published in the Journal of Fundamentals of Nursing from 1994, when it began to 2000 using an objective tool developed by the researches, and to identify the direction for the future research in Fundamentals of Nursing. Method: Research published in the Journal of Fundamentals of Nursing from 1994 were reviewed. Result: Most of research (94.2%) was non-degree based and funded research was very limited. The average number of researchers per research study was 2.2 and collaborative research has been gradually increasing. The total number of key words was 331 and the average was 2.6 per research. The major key words were not different from other nursing departments and included home care nursing (10 times), health promotion (8 times), self-care (7 times). self-efficacy (7 times), and homo-dialysis (6 times). Eighty seven percent of the research was quantitative research. and there were very few qualitative studies. Considering theory level, it was found that 40% were factor related research For study design, non-experimental studies were most frequent (66%), and the rate, especially of surveys, has remarkably decreased. Selection of subjects by convenience sampling, was most frequent and there were very few studies that provided the rationale for the calculation of sample size. The major subjects of study were patients (44.8%) with various diagnoses. The subjects usually gave oral consent to take part in that study. Giving information (46.9%) and exercise (26.5%) were common nursing interventions, and physiological indices (16.5%). vital signs (10.3%), physical functioning (8.2%), level of knowledge/skill (7.2%) and level of activity (6.2%) were frequently measured as outcome. Variables questionnaires were the major approach used to collect data, and 57.8% of the research provided the Cronbach alpha to guarantee internal consistency of study instruments. Data were analyzed with computerized statistical packages using, ANOVA (42.0%), T test(39.5%), and chi-square test. For the last seven years, nursing research in Fundamentals of Nursing has gradually improved in both quantify and quality. Conclusion: It was difficult to find any uniqueness or difference compared to other departments of nursing. In fact, because the history of the Journal of Fundamentals of Nursing is rather short, we can expect that there will be further improvement in qualify and content in the future.

• Journal of Korean Society of Transportation
• /
• v.25 no.1 s.94
• /
• pp.93-105
• /
• 2007

To raise transit ridership, it is necessary to expand transit facilities in long term Plans and to raise passengers' satisfaction by improving bus service qualify in short term Plans. In this study, the relationship between bus driver job satisfaction and Passenger service Performance is analyzed. The results of the study indicate that a driver s job satisfaction has an influence on accident rates. However, even when job satisfaction is not very high, if food resting facilities and Policies ave Provided then the Probability of an accident tends to decrease. To improve job satisfaction, several things should be done, such as stabilizing employment, creating fair company policies, improving overall employee welfare, and enhancing driver achievement from working. The satisfaction from salary is also an important factor and drivers are satisfied when they earn more money relative to other companies' drivers and when they aye satisfied with their salary increases. Therefore, creating appropriate monetary incentives would be a food policy for improving bus driver job satisfaction. This study serves as pilot research to make a foundation for further research about job satisfaction in the public transit field.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.4
• /
• pp.386-395
• /
• 2010

The steam generator management program(SGMP) has recently defined the procedures for the qualification of eddy current hardware and technique. These procedures provide two basic methods for qualification. The first way is to qualify the equipment or the probe by using the flaw mechanism and method of the pulled tubes from the heat exchangers or the artificial flawed tubes. The second way is to verify the equivalency with the characteristics of the qualified equipment or probe. In this case, the qualified equipment or probe may be modified to substitute or replace instruments or probes without re-qualification provided that the range of essential variables defined in the examination technique specification sheet are met. This study is to describe the result of the comparative performance evaluation of bobbin coil eddy current probes manufactured by KEPCO Research Institute and probes manufactured by a foreign manufacturer. As a result of this study, although there were minor differences between the two kinds of probes, it was evaluated that the two kinds of probes were almost identical in the significant performance characteristics described in the KEPCO Research Institute guideline.

• The KIPS Transactions:PartB
• /
• v.10B no.1
• /
• pp.95-102
• /
• 2003

In surveillance video system, there are many classes of images and some spatial regions are more important than other regions. The conventional compression method in this system have been compressed there full frames without classfying them depend on their important parts. To improve the accuracy of the image coding and deliver effective compression for the surveillance video system, it was necessary to separate the regions according to their importance. In this paper, we propose a new effective surveillance video image compression method. The proposed scheme defines importance based three-level region of interest block in a frame, such as background, motion object block, and the feature object block. A captured video image frame can be separated to these three different levels of block regions. And depends on the priority, each block can be modified and compressed in different resolution, compression ratio and qualify factor. Therefore, in surveillance video system, this algorithm not only reduces the image processing time and space, but also guarantees the Important image data in high quality to acquire the system's goal.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.2
• /
• pp.187-193
• /
• 2021

In February 2020, Gyeonggi-do paid the world's first Data Dividend to local residents of Gyeonggi Province who produced data using local currency. Currently, Data Dividend is being paid to consumers who have produced data, but this paper studied the expansion of Data Dividend qualifications according to the contribution to creating added value. First, it raised the question of whether it is right for the recipient of Data Dividend to have only the consumers who produced the data. Second, by analyzing the four elements of data valuation criteria that influenced the creation of added value identified the objects that influence the creation of added value. The 4 factors were divided into productivity, effectiveness, concreteness, and usability, and the objects corresponding to each factor were analyzed. Accordingly, it was determined whether platform workers contributed to the creation of added value. In conclusion, it was confirmed that not only consumers, who were the first data producers, but also platform workers who contributed to the concreteness of data valuation to create added value can qualify for Data Dividend. Since this paper focuses on the necessity of data allocation centered on platform workers among the objects, the validity of objects that influence added value other than platform workers are excluded.

• Progress in Medical Physics
• /
• v.17 no.3
• /
• pp.179-186
• /
• 2006

Purpose: Photon beam data of linear accelerators in Korea are collected, analyzed, and a simple method for checking and verifying the dose calculations in a TPS are suggested. Materials and Methods: Photon beam data such as output calibration condition, output factor, wedge factor, percent depth dose, beam profile, and beam quality were collected from 26 institutions in Korea. In order to verify the accuracy of dose calculation, ten sample planning tests were peformed. These Include square, elongated, and blocked fields, wedge fields, off-axis dose calculation, SSD variation. The planned data were compared to that of manual calculations. Results: The average and standard deviation of photon beam quality for 6, 10, and 15 MV were $0.576{\pm}0.005,\;0.632{\pm}0.004,\;and\;0.647{\pm}0.006$, respectively. The output factors of 6 MV photon beam measured at depth of dose maximum for $5{\times}5cm,\;15{\times}15cm,\;20{\times}20cm\;were\;0.944{\pm}0.006,\;1.031{\pm}0.006,\;and\;1.055{\pm}0.007$. For 10 MV photon beam, the values were $0.935{\pm}0.006,\;1.031{\pm}0.007,\;1.054{\pm}0.0005$. The collected data were not enough to calculate average, the output factors for 15MV photon beam with field size of $5{\times}5cm,\;15{\times}15cm,\;20{\times}20cm\;were\;0.941{\pm}0.008,\;1.032{\pm}0.004,\;1.049{\pm}0.014$. There was seven institutions $e{\times}ceeding$ tolerance when monitor unit values calculated from treatment planning system and manually were compared. The measured average MU values for the machines calibrated at SAD setup were 3 MU and 5 MU higher than the machines calibrated at SSD for 6 MV and 10 MV, respectively except the wedge case. When the wedges were inserted, the MU values to deliver 100 cGy to 5 cm depends on manufactures. When the same wedge angle was used, Siemens machine requires more MUs then Varian machine. Conclusion: In this study, photon beam data are collected and analyzed to provide a baseline value for chocking beam data and the accuracy of dose calculation for a treatment planning system.

• Archives of design research
• /
• v.18 no.4 s.62
• /
• pp.95-104
• /
• 2005

The purpose of this study is to estimate the determinants of product design and analyze the impacts of product design on quality competitiveness, product reliability, and consumer satisfaction in an attempt to provide a foundation for the theory of design management. For this empirical analysis, this study has derived the relevant measurement variables from a survey on 400 Korean manufacturing firms during the period of $August{\sim}October$ 2003. The empirical findings are summarized as follows: First, the determinants of product design are very significantly (at p<0.001) estimated to be the R&D capability, the level of R&D expenditure, the level of innovative activities(5S, TQM, 6Sigma, QC, etc.). This empirical result can support Pawar and Driva(1999)'s two principles by which the performance of product design and product development can be simultaneously evaluated in the context of CE(concurrent engineering) of NPD(newly product development) activities. Second, the hypothesis on the causality: product design${\rightarrow}$quality competitiveness${\rightarrow}$customer satisfaction${\rightarrow}$customer loyalty is very significantly (at p<0.001) accepted. This implies that product design positively affects consumer satisfaction, not directly but indirectly, by influencing quality competitiveness. This empirical result of this study can also support the studies of for example Flynn et al.(1994), Ahire et at.(1996), Afire and Dreyfus(2000) which conclude that design management is a significant determinant of product quality. The aforementioned empirical results are important in the following sense: the empirical result that quality competitiveness plays a bridging role between product design and consumer satisfaction can reconcile the traditional debate between QFD(quality function development) approach asserted by product developers and conjoint analysis maintained by marketers. The first empirical result is related to QFD approach whereas the second empirical result is related to conjoint analysis. At the same time, the empirical results of this study can support the rationale of design integration(DI) of Ettlie(1997), i.e., the coordination of the timing and substance of product development activities performed by the various disciplines and organizational functions of a product's life cycle. Finally, the policy implication (at the corporate level) from the empirical results is that successful design management(DM) requires not only the support of top management but also the removal of communication barriers, (i.e. the adoption of cross-functional teams) so that concurrent engineering(CE), the simultaneous development of product and process designs can assure product development speed, design quality, and market success.