• 제목/요약/키워드: pyroelectric infrared (PIR) sensor

검색결과 17건 처리시간 0.027초

초전형 적외선 센서 회전방식을 이용한 정지 인체 감지 시스템에 관한 연구 (A Design of Standing Human Body Sensing System Using Rotation of a PIR Sensor)

  • 차형우;조민형
    • 전자공학회논문지
    • /
    • 제53권1호
    • /
    • pp.129-136
    • /
    • 2016
  • 초전형 적외선(pyroelectric infrared : PIR) 센서를 이용하여 정지 및 이동인체 감지 시스템을 개발하였다. 감지 시스템은 전원부, 초전형 적외선 센서 인터페이스 회로, 극소형 스템핑 모터, 그리고 디지털 제어부로 구성된다. 정지된 인체를 감지하는 원리는 PIR 센서와 프레넬 렌즈(Fresnel lens)를 부착한 스템핑 모터를 180도로 6초 간격으로 회전하여 인체의 유무를 검출하고 일정기간 동안 인체 감지 신호가 없으면 모터를 정지시키는 것이다. 제안한 감지 시스템에 필요한 제어 알고리즘을 개발하였다. 실험을 통해 감지 시스템은 $37^{\circ}C$의 정지 및 이동하는 인체에 대하여 6m의 감지거리와 30도의 감지 각도를 갖고 있다는 것을 확인하였다.

P(VDF/TrFE) 필름의 두께에 따른 인체 감지형 초전형 PIR 적외선 센서의 특성 (Effect of P(VDF/TrFE) Film Thickness on the Characteristics of Pyroelectric Passive Infrared Ray Sensor for Human Body Detection)

  • 권성열
    • 센서학회지
    • /
    • 제20권2호
    • /
    • pp.114-117
    • /
    • 2011
  • A thick 25 ${\mu}m$ thickness poled P(VDF/TrFE) film pyroelectric infrared ray sensor has been fabricated and then thin 1.6 ${\mu}m$ thickness P(VDF/TrFE) film pyroelectric infrared ray sensor has been fabricated also. These thick and thin P(VDF/TrFE) film pyroelectric infrared ray sensor was mounted in TO-5 housing to detect infrared light of 5.5 ~ 14 ${\mu}m$ wavelength for human body detecting with each other. The noise output voltage of the thick P(VDF/TrFE) film pyroelectric infrared ray sensor were 380 mV and NEP(noise equivalent power) is $3.95{\times}10^{-7}$ W which is the similar value with the commercial pyroelectric infrared ray sensor using ceramic materials as a sensing material. The NEP and specific detectivity $D^*$ of the thin P(VDF/TrFE) film pyroelectric infrared ray sensor were $2.13{\times}10^{-8}$ W and $9.37{\times}106$ cm/W under emission energy of 13 ${\mu}W/cm^2$ respectively. These result caused by lower thermal diffusion coefficient of a thin 1.6 ${\mu}m$ thickness PVDF/TrFE film than the thick 25 ${\mu}m$ thickness poled P(VDF/TrFE) film pyroelectric infrared ray sensor.

스마트 홈을 위한 PIR 센서 기반 댁내 위치 인식 시스템 개발 (Development of PIR Sensor Based Indoor Location Detection System for Smart Home)

  • 하경남;이경창;이석
    • 제어로봇시스템학회논문지
    • /
    • 제12권9호
    • /
    • pp.905-911
    • /
    • 2006
  • Smart homes are expected to offer various intelligent services by recognizing the residents' life pattern, health, and feeling. One of the key issues for realizing the smart home is how to detect the locations of residents. Currently, the research effort is focused on two approaches: terminal-based and non-terminal-based method. The terminal-based method employs a type of device that should be carried by the resident while the non-terminal-based method has no such device. This paper presents a novel non-terminal-based approach using an array of pyroelectric infrared sensors (PIRs) that can detect residents. The feasibility of the system is evaluated experimentally on a test bed.

Reduction of False Alarm Signals for PIR Sensor in Realistic Outdoor Surveillance

  • Hong, Sang Gi;Kim, Nae Soo;Kim, Whan Woo
    • ETRI Journal
    • /
    • 제35권1호
    • /
    • pp.80-88
    • /
    • 2013
  • A passive infrared or pyroelectric infrared (PIR) sensor is mainly used to sense the existence of moving objects in an indoor environment. However, in an outdoor environment, there are often outbreaks of false alarms from environmental changes and other sources. Therefore, it is difficult to provide reliable detection outdoors. In this paper, two algorithms are proposed to reduce false alarms and provide trustworthy quality to surveillance systems. We gather PIR signals outdoors, analyze the collected data, and extract the target features defined as window energy and alarm duration. Using these features, we model target and false alarms, from which we propose two target decision algorithms: window energy detection and alarm duration detection. Simulation results using real PIR signals show the performance of the proposed algorithms.

셔터방식의 쵸퍼를 이용한 정지 및 이동인체 감지 모듈 개발 (Development of Standing and Moving Human Body Sensing Module Using a Chopper of Shutter Method)

  • 차형우;이원호
    • 전자공학회논문지
    • /
    • 제53권2호
    • /
    • pp.109-116
    • /
    • 2016
  • 셔터방식의 쵸퍼를 이용한 정지 및 이동인체 감지 모듈을 개발하였다. 감지 모듈은 프레넬 렌즈(Fresnel lens), 초전형적외선(pyroelectric infrared : PIR) 센서, 센서 인터페이스 회로, MCU(micro control unit) 그리고 경보 LED(light emitting diode)로 구성된다. 정지 인체 감지 원리는 PIR 센서에서 나오는 신호를 카메라 셔터를 이용하여 인체의 열을 쵸핑하여 감지하는 방식이다. MCU에서 인터럽트 함수를 제어하는 알고리즘을 통해 정지 및 이동 인체 신호를 감지하게 하였다. 개발한 감지 모듈은 기구부와 PCB(print circuit board)를 일체화함으로써 종래의 상용화되고 있는 이동인체 감지 모듈을 대체 가능하다. 실내 상온에서의 실험 결과, 감지거리는 약 7.0m, 감지각도는 $110^{\circ}$로 측정되었다. 이런 조건에서 감지률은 100%이였고 모듈의 소비 전력는 100mW이였다.

PIR 센서 기반 침입감지 시스템 (Intruder Detection System Based on Pyroelectric Infrared Sensor)

  • 정연우;;조성원;정선태
    • 한국지능시스템학회논문지
    • /
    • 제26권5호
    • /
    • pp.361-367
    • /
    • 2016
  • 기존 디지털 출력 방식의 PIR 센서를 이용한 침입감지 시스템은 사람이 아닌 다른 물체에 대한 침입 탐지 오류가 많았다. 본 논문은 이를 극복하기 위하여 아날로그 출력 방식의 PIR 센서 기반 침입 감지 시스템을 제안한다. 아날로그 방식 PIR 센서는 임계값을 기준으로 이진 출력값 대신, 일정 범위 내의 다양한 전압 준위로 출력값을 내보낸다. 아날로그 PIR 센서를 이용하여 획득된 신호의 샘플링된 신호값으로부터 FFT(Fast Fourier Transform) 또는 MFCC(Mel-frequency cepstrum codfficents)을 이용하여 신호의 주파수 성분을 추출하여, 인공 신경회로망(Artificial Neural Network)의 특징벡터로 사용된다. 다양한 인간의 움직임과 애완동물의 움직임에 대한 신호 패턴들을 학습한 인공 신경회로망을 통해서 침입상황에서 침입한 객체가 사람인지 애완동물인지 판별하게 된다.

지능형 주택을 위한 구성원 식별 및 위치 이동 감지 센서 네트워크 시스템 (A Wireless Sensor Network Systems to Identify User and Detect Location Transition for Smart Home)

  • 이선우;양승용
    • 한국정보과학회논문지:정보통신
    • /
    • 제37권5호
    • /
    • pp.396-402
    • /
    • 2010
  • 지능형 주택의 상황인지 서비스를 위해서는 거주자의 현재 위치를 파악하는 것이 필수적이다. 이를 위해 본 논문에서는 사용자에게 별도의 장치 소지를 요구하지 않으며 특정 운에 대한 출/입 행동과 같은 위치 이동과 그 사람이 누구인지를 식별하는 센서 네트워크 시스템을 제안한다. 새롭게 개발된 센서 노드는 선행 연구 결과[1]의 짧은 동작 수명 문제를 해결한 것으로 2개의 초전형(PIR) 센서와 초음파 센서, 그리고 2.4 GHz 문선 통신 모듈로 구성된다. 제안된 구성원의 식별 방법은 초음파 센서를 이용한 구성원의 키 차이를 이용한다. 거주자의 위치 이동의 감지는 출/입 행동의 감지에 기초하며 이와 같은 출/입 행동 감지는 2개의 PIR 센서의 감지 순서에 기초하여 이루어진다. 전체 센서 네트워크의 구성은 각 센서 노드가 수신 노드와 과 1대 1로 연결되는 별 형태로 이루어져 있다. 제안된 시스템은 본보기주택에 설치되어 3명의 사용자를 대상으로 실험되었고 그 결과 완벽한 출/입 행동 감지와 평균 81.3%의 구성원 식별 성능을 얻었다.

대기전력 저감형 LED 센서 조명시스템의 개발 (Development of a Sensor-Based LED Lighting System with Low Standby Power)

  • 김진근;강문성
    • 전기학회논문지P
    • /
    • 제61권1호
    • /
    • pp.18-22
    • /
    • 2012
  • In this paper, we propose a sensor-based LED lighting system that can significantly reduce standby powers. The proposed LED lighting system has the more advanced power circuit and control mechanism compared to existing one. The whole power circuit consists of two subcircuits. One is designed to apply electric powers to controller, PIR(Pyroelectric Infrared Ray) sensor and CdS, and the other one is designed to apply electric powers to LED module. Such a power circuit configuration makes the standby powers reduction of LED lighting system possible. From the experimental results, we confirmed that the standby powers saving performance of the developed power circuit is superior to that of the conventional one.

PIR 센서와 정전류 IC를 이용한 인체 감지형 POWER LED 구동 회로 (A Human Body Sensing POWER LED Drive Circuit Using Constant-Current IC and PIR Sensor)

  • 박종연;유진완;최왕섭
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 제39회 하계학술대회
    • /
    • pp.2295-2296
    • /
    • 2008
  • 본 논문에서는 에너지 절감을 위하여 POWER LED 구동회로를 PIR(Pyroelectric Infrared Ray) 센서를 이용하여 ON/OFF 제어를 하였다. POWER LED의 전류 특성을 설명하였으며 설명된 전류 특성을 개선하고자 정전류 유지 회로를 구성하였다. 그리고 인체 감지 센서에서 발생되는 ON/OFF 신호를 증폭시키는 구동 회로를 설계하여 정전류 유지 회로에 직접 결합하는 방식을 제안하였다. 실험한 결과는 POWER LED의 ON 상태시 4Watt, OFF 상태시 0.5Watt를 소비하였으며, 정전류 유지 회로에 의해 POWER LED 구동 전류의 리플이 줄어들어 안정적인 동작을 하는 것으로 나타났다.

  • PDF