• Journal of the Korean Society of Radiology
• /
• v.17 no.6
• /
• pp.851-857
• /
• 2023

The purpose of this study is to investigate the effect of changes in collimation size and sub ROI on exposure index(EI) in hand radiography, present collimation size and EI suitable for average hand size of Koreans, and present the effect of changes in sub ROI on EI. The subjects of this study were hand-wrist phantom, and the exposure conditions were set to 55 kVp, 125, mA, and 6.25 mAs, and source to image receptor distance was applied to 110 cm. Based on the vendor recommended sub-ROI (18.7" × 18.7", 8" × 10", 8" × 7.4", 6" × 7.4")and the textbook's recommended sub-ROI 8" × 10", each obtaining 30 images, and comparing the EI shown in the equipment. The EI according to the change in the size of the collimation were 1663.7±4.52, 8"×10" is 1489.1±4.49, 8"×7.4" is 1716.9±3.00, 6"×7.4" is 168.7±3.66 for each EI, and the average value of each value was statistically significant. The average EI according to the sub ROI change was 1489.1±4.49 for SS, LS was 1694.8±5.19 for AEC, 2052.9±5.96, VR was 1548.3±3.20, and HR was 1663.2±4.33. The appropriate field size considering the hand size of Koreans was found to be 8"×7.4". In addition, when the field size increases based on the generally known field size (8"×10") during hand radiography, the EI value changes from a maximum of 15% to a minimum of 11%, and the sub ROI shape based on sub ROI 'SS' Depending on the change, the EI value increased from a maximum of 37% to a minimum of 3%.

• Journal of the Korean Society of Radiology
• /
• v.17 no.6
• /
• pp.903-909
• /
• 2023

The purpose of this study is to compare and analyze the effect of changes in the patient's central position on the exposure dose and image quality of surrounding organs during a chest lateral examination using an Auto Exposure Control(AEC). The experiment was conducted on a human body phantom. A needle was attached to the lower part of the center of the coronal plane of the phantom, and a lead ruler was attached to the lower part of the detector so that the 50 cm point was located at the lower center of the AEC ion chamber. The exposure conditions were 125 kVp, 320 mA, the distance between the source and the image receptor was 180 cm, and the exposure field size was 14 × 17 inches. Only one AEC ion chamber was used at the bottom center, and the density was set to '0' and sensitivity to 'Middle', and the central X-ray was incident vertically toward the 6th thoracic vertebra. With AEC mode applied, the 50 cm point of the needle and lead ruler were aligned and the phantom was moved 5 cm toward the stomach (F5) and 5 cm toward the back (B5), and the dose factor was analyzed by measuring ESD. The ESD of the thyroid gland according to the change in patient center position was 232.60±2.20 μGy for Center, 231.22±1.53 μGy for F5, and 184.37±1.19 μGy for B5, and the ESD of the breast was 288.54±3.03 μGy for Center, F5 was 260.97±1.93 μGy, B5 was 229.80±1.62 μGy, and the ESD of the center of the lung was 337.02±3.25 μGy for Center, F5 was 336.09±2.29 μGy, and B5 was 261.76±1.68 μGy. As a result of comparing the average values of dose factors between each group, the difference in average values was statistically significant (p<0.01), and each group appeared to be independent. As a result of the study, there was no significant difference in the dose to the thyroid, breast, and center of the lung according to the change in the patient's central position, except for the breast (10%) when the patient moved forward about 5 cm. However, movement of about 5 cm posteriorly resulted in an average dose reduction of 23.7%. Additionally, when the patient's central position was moved to the rear, image quality deteriorated.

• Korea Trade Review
• /
• v.48 no.1
• /
• pp.243-261
• /
• 2023

This study was conducted with the goal of analyzing the needs of Truckers, who are the main users of the cargo transportation platform, to find a development direction for the improvement and activation of the cargo transportation platform service. For this purpose, this study conducted an empirical analysis through IPA analysis targeting Truckers using domestic cargo transportation platforms. As a result of the IPA analysis, in the case of importance, fair fare presentation, unfair trade prevention measures, transportation payment deadline accuracy, transportation section information provision accuracy, quick interaction, application system quality, ease of use, user-customized service, settlement service support function, Variety of transportation sections, brand image, and additional services were shown in order. In the case of satisfaction, ease of use, settlement service support function, transport section information provision accuracy, application system quality, brand image, additional services, user-customized service, transport section diversity, quick interaction, transport payment deadline accuracy, unfair transaction prevention Measures and fair fares were presented in that order. The analysis results show high satisfaction with the ease of use related to the platform quality and the function to support the settlement work. These results can be seen as the result of a significant investment in system quality improvement for the convenience of users by suppliers in the domestic cargo transportation platform industry, where competition has become fierce. As the factors most urgently needed for improvement, 'observance of payment deadlines', 'prevention of unfair trade', and 'provision of fair fares' were selected, and these are related to chronic problems in the domestic freight transportation industry.

• Korea Trade Review
• /
• v.48 no.3
• /
• pp.131-150
• /
• 2023

The purpose of this study was to find a countermeasure to the U.S. import refusals for the Korean healthcare and life sciences industry. To this end, an analysis of trends during the pandemic was conducted using the KITA Border Rejection Database, which includes information on items and types of import refusals. The reason for rejection was also analyzed according to the FDA violation codes. The degree of countermeasure for import refusals was identified by measuring the unit rejection rate (URR). The results of the analysis showed that the major U.S. import refusals for the Korean healthcare and life sciences industry had expanded from contact lenses to COVID-19 diagnostic kits and drugs after the pandemic broke out. The major reasons for import refusals were non-compliance with the Predicate Device and Drugs Act and non-approval by the FDA for products and facilities. On the other hand, the unit rejection rate (URR) of major items in the Korean healthcare and life sciences industry was measured higher than the industry average. The results therefore showed a low level of response to U.S. import refusals. The results of the analysis of reasons for import refusals by item according to FDA violation codes were as follows. First of all, the main violation for contact lenses and COVID-19 diagnostic kits corresponded to misbranding. This was often due to the fact that Korean companies did not provide the relevant notices and information required by the FDA. Many cases also failed to demonstrate a substantial equivalency compared to predicate devices already on the market. On the other hand, applications for new unapproved drugs were not accepted as they had yet to pass relevant regulations that would prove their safety and efficacy. In conclusion, import refusals for the Korean healthcare and life sciences industry were found to be closely related to technical barriers to trade (TBT).

• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.40-52
• /
• 2023

The basic purpose of building material called tiles is waterproofing and damp proofing, and they were restricted to use on important buildings to symbolize authority. This is especially true during the Three Kingdoms period, although unearthed examples are rare. Most of these tiles are found in ruins in the Silla and Baekje regions. Tiles were excavated from the Buwon-dong ruins that show the oldest manufacturing technique in the Gaya region to date, and tiles from the early Three Kingdoms period were recently excavated from the Gimhae Bonghwang-dong ruins, which is presumed to be the site of the royal palace of Geumgwan Gaya. These are important materials that show the appearance of tiles from the early days of Gimhae, the ancient capital of Geumgwan Gaya. The tiles excavated from the Bonghwang-dong ruins are reddish-yellow because a small amount of sand was mixed in the tile material and baked at a low temperature. The tiles are thin, no traces of fabric were identified, but traces of clay bands were identified. Tapping tool marks and traces of an anvil used in pottery production are clearly observed on the inside and outside, indicating that the tiles were made in the same way as earthenware manufacturing methods. If this is connected to the genealogy of the potters who made Gaya earthenware, it is estimated that tiles and earthenware were produced together as in the Songrim-ri ruins in Bulo-dong, Incheon, Songgok-dong ruins in Gyeongju, and Mulcheon-ri ruins. To date, tiles excavated from the Gimhae area have been identified only in places believed to be the Geumgwan Gaya City Wall (Royal Palace) in the Gimhae Basin. Considering what has been recorded so far and the geographical scenery, the Bonghwang-dong remains are the only city wall candidate site, and this is clearly revealed through the existence of the excavated tiles, which proves this. Considering that a small number of tiles were excavated during this time, it is estimated that the role of tiles as a luxury product with a symbolic meaning was greater than that of roofing materials, and there were strict restrictions and controls on its use.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.288-318
• /
• 2023

This work began with the aim of examining the history of the concept "cultural property" that is expected to disappear, and the main subject of research was the history that preceded the spread of this notion throughout society. The phrase "cultural property" first appeared in the 1920s, and was used in various fields such as literature, history, music, and philosophy in the context of cultural resources. Until immediately following liberation from the Japanese colonial era, the meaning of cultural assets was widely applied in the range of "cultural resources," and during this period, it was often used to help supplant the reality and history of Japanese occupation. Immediately after the Korean War, it was also employed for the purpose of 'restoration of cultural resources through war'. Recognition of cultural property directly influenced by Japan's Cultural Heritage Protection Act has occurred since 1950s. In the early 1960s, the enactment of various laws related to cultural properties and the establishment of the Cultural Heritage Administration caused the meaning of cultural property to be limited to 'cultural heritage'. In this way, the definition of state-led cultural property has continued to apply to this day. It has not been clearly confirmed whether the concept of cultural properties was imported from Japan through means such as the Cultural Heritage Protection Act. Cases in which several Japanese students endorsed the concept of cultural property within Korea serve to increase the likelihood that the concept was indeed imported from Japan. However, "coined language using multiple Chinese characters," "the phenomenon of cultural complex words in the 1920s,", and "cases of non-Japanese international students using the concept of cultural property" also open up the possibility of their own occurrence. Apart from the general importance of the concept of cultural property, intellectuals at the time used this concept to promote internal development and the overcoming of colonial Joseon. In this research, it was confirmed that the conceptual word cultural property was older and had a wider history than the general perception had indicated previously. The history of the conceptual term "cultural property" may appear to be more than 60 years old based on the enactment of the Cultural Heritage Protection Act, but in fact it is nearly 100 years old when traced back to on 1925, as established here. In general, the creation and disappearance of terms may proceed naturally with social change, but such terms may alternatively be created or erased through national policy. Identifying the origins of a phrase that is about to disappear represents a significant task for purposes of establishing its historical meaning.

• Journal of Internet Computing and Services
• /
• v.24 no.6
• /
• pp.31-39
• /
• 2023

The purpose of this study is to propose a scientific performance evaluation framework for measuring and managing the overall outcome of complex types of projects that are linked to public demand-based commercialization, such as information system projects and public procurement, in integrated national R&D projects. In the case of integrated national R&D projects that involve multiple research institutes to form a single final product, and in the case of demand-based demonstration and commercialization of the project results, the existing evaluation system that evaluates performance based on the short-term outputs of the detailed tasks comprising the R&D project has limitations in evaluating the mid- and long-term effects and practicality of the integrated research products. (Moreover, as the paradigm of national R&D projects is changing to a mission-oriented one that emphasizes efficiency, there is a need to change the performance evaluation of national R&D projects to focus on the effectiveness and practicality of the results.) In this study, we propose a performance evaluation framework from a structural perspective to evaluate the completeness of each national R&D project from a practical perspective, such as its effectiveness, beyond simple short-term output, by utilizing the Hourglass model. In particular, it presents an integrated performance evaluation framework that links the top-down and bottom-up approaches leading to Tool-System-Service-Effect according to the structure of R&D projects. By applying the proposed detailed evaluation indicators and performance evaluation frame to actual national R&D projects, the validity of the indicators and the effectiveness of the proposed performance evaluation frame were verified, and these results are expected to provide academic, policy, and industrial implications for the performance evaluation system of national R&D projects that emphasize efficiency in the future.

• Journal of the Society of Disaster Information
• /
• v.19 no.4
• /
• pp.976-983
• /
• 2023

Purpose: The dynamic behavior of a bridge structure under seismic loading depends on many uncertainties, such as the nature of the seismic waves and the material and geometric properties. However, not all uncertainties have a significant impact on the dynamic behavior of a bridge structure. Since probabilistic seismic performance evaluation considering even low-impact uncertainties is computationally expensive, the uncertainties should be identified by considering their impact on the dynamic behavior of the bridge. Therefore, in this study, a global sensitivity analysis was performed to identify the main parameters affecting the dynamic behavior of bridges with I-curved girders. Method: Considering the uncertainty of the earthquake and the material and geometric uncertainty of the curved bridge, a finite element analysis was performed, and a surrogate model was developed based on the analysis results. The surrogate model was evaluated using performance metrics such as coefficient of determination, and finally, a global sensitivity analysis based on the surrogate model was performed. Result: The uncertainty factors that have the greatest influence on the stress response of the I-curved girder under seismic loading are the peak ground acceleration (PGA), the height of the bridge (h), and the yield stress of the steel (fy). The main effect sensitivity indices of PGA, h, and fy were found to be 0.7096, 0.0839, and 0.0352, respectively, and the total sensitivity indices were found to be 0.9459, 0.1297, and 0.0678, respectively. Conclusion: The stress response of the I-shaped curved girder is dominated by the uncertainty of the input motions and is strongly influenced by the interaction effect between each uncertainty factor. Therefore, additional sensitivity analysis of the uncertainty of the input motions, such as the number of input motions and the intensity measure(IM), and a global sensitivity analysis considering the structural uncertainty, such as the number and curvature of the curved girders, are required.

• Korean Journal of Heritage: History & Science
• /
• v.56 no.4
• /
• pp.94-108
• /
• 2023

Onyanghaenggung Palace(temporary palace at Onyang) is an important cultural heritage that can substantially confirm the king's onhaeng(溫行) base on literature records such as <Ongungyeonggoedae(溫宮靈槐臺)>, <Oncheonhaenggungdo(溫泉行宮圖)> of 『Ongungsasil(溫宮事實)』『, Younggoedaegi(靈槐臺記)』and cultural property such as Yeonggoedae(靈槐臺) and Shinjeong Monument(神井碑). As the Onyang Tourist Hotel is located in the presumed site of the Onyanghaenggung Palace, even the identity of the Onyanghaenggung Palace site is being threatened without restoration efforts. The purpose of this study is to estimate the location of Onyanghaenggung Palace based on <Oncheonhaenggungdo> before the damages during the Japanese colonial period. To achieve these purposes, records related to Onhaeng during successive kings' terms in the Joseon Dynasty are first reviewed, before changes in the architecture of Onyanghaenggung Palace that took place in the Joseon Dynasty and damage suffered during the Japanese colonial period are summarized, and finally <Oncheonhaenggungdo>, <Eupji>, <Ancient Maps>, <Jijeokwondo> are reviewed. Based on these processes, the location of Onyanghaenggung Palace is estimated by comparing the current Onyang Tourist Hotel and the surrounding area. The results of this study are as follows. First, if the 1,758 cheok(尺) of 「Onyanggun eupji」 and 「Hoseo eupji」 are converted in Jucheok(周尺), the scope of Onyanghaenggung Palace is close to the inner circumference of the site(垈) in Jijeokwondo(1914). Second, the streamlet leading to Oncheoncheon(溫泉川) from the southern side of Onyanggwan(溫陽館), the hot spring hole in use of <Distribution Map of Hot Spring(溫泉分布見取圖)>(1925, 1928), and considering the relationship of the inner east gate(內東門), Bigak(碑閣), Sinjeong(神井) of <Oncheonhaenggungdo>, the building of Hermann Gustav Theodor Sander and the Copyright Commission's Onyang Hot Springs photograph can be estimated as the Onyanghaenggung Palace Hot-spring, namely Tangsil(湯室). Third, in the process of developing to amusement park, the transfer and relocation of the Yeonggaedae site(a governmentowned property) was requested by Gyeongnam Railway Company, but Chungcheongnam-do denied transfer and relocation of the Yeonggaedae because of the importance in the history of Onyang Hot Springs, so the government-owned Yeonggaedae Monument site were permanently preserved at the current location together with the hoe tree(Sophora japonica L.). Also, Yeonggoedae in <Tourists Attractions around Gyeongnam Railway in Joseon (朝鮮京南鐵道沿線名所交通図絵)> (1929) is shown to exist in its current location, and it can be seen that the Shinjeong Monument Pavilion was moved to the front of Shinjeonggwan (神井館). Based on the circumference of Onyanghaenggung Palace, the location of Onyanghaenggung Palace Hot Spring (Tangsil) and Yeonggaedae Monument Pavilion, changes in roads and lots of land during the Japanese colonial period and the modern period, as well as the location of Onyanghaenggung Palace and other major buildings, can be estimated to extend to the current Shimin-ro and Onyang Hot Spring Market.

• Journal of the Society of Disaster Information
• /
• v.19 no.4
• /
• pp.869-881
• /
• 2023

Purpose: This study aims to come up with improvement measures to improve the effectiveness of child safety measures. Method: The current status of child safety accidents was investigated and implications were deduced by analyzing major child safety measures by government department in the past. In addition, a perception survey was conducted on 1,000 people including children, guardians, and children's facility workers who are subject to child safety policies. Result: Regarding the safety of children's living space(environment), 35.3% of guardians answered that more than 1/3 of them were not safe. Both guardians(95.3%) and children's facility workers(89%) answered that there was the highest risk of 'traffic accidents', and the second risk factor was parents(carelessness of workers at children's facilities) and children's facility workers(careless of guardians at home). Looking at the risks by place, "road and sidewalk" was the most dangerous place and for child safety, guardians(64.3%) and workers (78.3%) both said that the role of "parent" is the most important. For improvements to prevent child safety accidents, the response rate of "strengthening safety management of road traffic facilities" is the most necessary with 75.8% for guardians and 65% for child use facilities. Conclusion: The reinforcement measures to strengthen the effectiveness of child safety measures are as follows. First, in order to ensure the continuity of child safety measures, it should be operated effectively so that those subject to the establishment of the Comprehensive Plan for Child Safety, which took effect in August 2022, can feel it. Second, in order to improve the sensitivity of children's policy targets, promotion measures that take into account the characteristics of each child safety field should be continuously strengthened. Third, it is necessary to expand safety infrastructure for each field to secure child safety. Fourth, it is necessary to strengthen safety education that can ensure safety for children themselves and to come up with detailed measures to make safety education for parents(guardians) mandatory.