• Journal of Computing Science and Engineering
• /
• v.2 no.3
• /
• pp.249-273
• /
• 2008

Epidemic protocols have two fundamental assumptions. One is the availability of a mechanism that provides each node with a set of log(N) (fanout) nodes to gossip with at each cycle. The other is that the network size N is known to all member nodes. While it may be trivial to support these assumptions in small systems, it is a challenge to realize them in large open dynamic systems, such as peer-to-peer (P2P) systems. Technically, since the most fundamental parameter of epidemic protocols is log(N), without knowing the system size, the protocols will be limited. Further, since the network churn, frequently observed in P2P systems, causes rapid membership changes, providing a different set of log(N) at each cycle is a difficult problem. In order to support the assumptions, the fanout nodes should be selected randomly and uniformly from the entire membership. This paper investigates one possible solution which addresses both problems; providing at each cycle a different set of log(N) nodes selected randomly and uniformly from the entire network under churn, and estimating the dynamic network size in the number of nodes. This solution improves the previously developed distributed algorithm called Shuffle to deal with churn, and utilizes the Shuffle infrastructure to estimate the dynamic network size. The effectiveness of the proposed solution is evaluated by simulation. According to the simulation results, the proposed algorithms successfully handle network churn in providing random log(N0 fanout nodes, and practically and accurately estimate the network size. Overall, this work provides insights in designing epidemic protocols for large scale open dynamic systems, where the protocols behave autonomically.

• Korea-Australia Rheology Journal
• /
• v.21 no.4
• /
• pp.213-223
• /
• 2009

Taylor-Couette flow (i.e., flow between concentric, rotating cylinders) has long served as a paradigm for studies of hydrodynamic stability. For Newtonian fluids, the rich cascade of transitions from laminar, Couette flow to turbulent flow occurs through a set of well-characterized flow states (Taylor Vortex Flow, wavy Taylor vortices, modulated wavy vortices, etc.) that depend on the Reynolds numbers of both the inner and outer cylinders ($Re_i$ and $Re_o$). While extensive work has been done on (a) the effects of weak viscoelasticity on the first few transitions for $Re_o=0$ and (b) the effects of strong viscoelasticity in the limit of vanishing inertia ($Re_i$ and $Re_o$ both vanishing), the viscoelastic Taylor-Couette problem presents an enormous parameter space, much of which remains completely unexplored. Here we describe our recent experimental efforts to examine the effects of drag reducing polymers on the complete range of flow states observed in the Taylor-Couette problem. Of particular importance in the present work is 1) the rheological characterization of the test solutions via both shear and extensional (CaBER) rheometry, 2) the wide range of parameters examined, including $Re_i$, $Re_o$ and Elasticity number E1, and 3) the use of a consistent, conservative protocol for accessing flow states. We hope that by examining the stability changes for each flow state, we may gain insights into the importance of particular coherent structures in drag reduction, identify simple ways of screening new drag reducing additives, and improve our understanding of the mechanism of drag reduction.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.11
• /
• pp.12-17
• /
• 2009

This paper presents a tag emulator for a UHF band RFID system. The tag emulator supports the 1800-6C and EPC global class 1 generation 2 standards. The transmitted signal from a reader is generated using the PIE coding and ASK modulation methods. Signals of a tag are from the FM0 coding and ASK modulation methods. The ARM7 processor carries out the overall control of the system and signal analysis of incoming data. The verification of the tag emulator employs the application platform implemented in C++. Users can define parameter values for protocol during the application run. The tag emulator presented in this paper allows evaluating various design alternatives of the target RFID system in real applications.

• Journal of Acupuncture Research
• /
• v.34 no.2
• /
• pp.49-59
• /
• 2017

Objectives : This study evaluated the efficacy of electroacupuncture therapy using an insulated needle in adults with abdominal obesity. Methods : This study was a randomized, double-blind, parallel-designed pilot trial. Sixteen participants eligible according to the inclusion and exclusion criteria were randomly divided into an insulated needle group and a control group. Insulated or common needles were inserted at acupoints located on the abdomen (CV12, CV6, ST25, ST27, SP15) and were electrically stimulated for 30 minutes (16 Hz, within tolerable strength). A total of 10 sessions of treatment were performed twice per week for 5 weeks. All participants were requested to maintain their usual diet and lifestyle. The outcome measures were waist circumference (WC), waist-to-hip ratio (WHR), and abdominal computed tomography (CT) of the total fat area (TFA), subcutaneous fat area (SFA), and visceral fat area (VFA). Results : A total of 12 participants divided into the insulated needle group (n = 5) and the control group (n = 7; common needle) were treated for 10 sessions and analyzed per-protocol (PP). WC decreased significantly after 10 sessions in both groups. The WC, TFA, SFA, and VFA of abdominal CT in the insulated needle group decreased more than in the control group; however, there were no significant differences in any parameter between the insulated needle group and the control group. Patients in the insulated needle group were more strongly stimulated with electrical stimulation than patients in the control group. Conclusion : Electroacupuncture using insulated needles in adults with abdominal obesity might be a more effective treatment than common needles. Additional studies are required to compensate for the limitations of this pilot study and to verify the results and efficacy.

• Annals of Clinical Neurophysiology
• /
• v.19 no.1
• /
• pp.34-39
• /
• 2017

Background: Automated nerve excitability testing is used to assess various peripheral neuropathies and motor neuron diseases. Comparing these excitability parameters with normal data provides information regarding the axonal excitability properties and ion biophysics in diseased axons. This study measured and compared normal values of axonal excitability parameters in both the distal motor and sensory axons of normal Koreans. Methods: The axonal excitability properties of 50 distal median motor axons and 30 distal median sensory axons were measured. An automated nerve excitability test was performed using the QTRACW threshold-tracking software (Institute of Neurology, University College London, London, UK) with the TRONDF multiple excitability recording protocol. Each parameter of stimulus-response curves, threshold electrotonus, current-voltage relationship, and recovery cycle was measured and calculated. Results: Our Korean normal data on axonal excitability showed ranges of values and characteristics similar to previous reports from other countries. We also reaffirmed that there exist characteristic differences in excitability properties between motor and sensory axons: compared to motor axons, sensory axons showed an increased strength-duration time constant, more prominent changes in threshold to hyperpolarizing threshold electrotonus (TE) and less prominent changes in threshold to depolarizing TE, and more prominent refractoriness and less prominent subexcitability and superexcitability. Conclusions: We report normal data on axonal excitability in Koreans. These data can be used to compare various pathological conditions in peripheral nerve axons such as peripheral neuropathies and motor neuron disease.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.17 no.6
• /
• pp.122-129
• /
• 2013

Since electrical resistivity of concrete can be measured in a more rapid and simple way than chloride diffusivity, it should be primarily regular quality control of the electrical resistivity of concrete which provides the basis for indirect of quality control of chloride diffusivity during concrete construction. If this is realized, the electrical resistivity of concrete can be a crucial parameter to establish maintenance strategy for marine concrete structures. The purpose of this study is to develop, design and test a surface electrical resistivity measurement protocol. Microstructural affecting factors such as capillary water, porosity, tourtousity, and so on, on the electrical resistivity of concrete were examined taking into account for mixing proportion properties, and hydration stage. This study can provide a non-destructive approach for durability design of marine concrete. From the relationship between electrical resistivity and chloride diffusivity, it is expected that the result is subsequently used as a calibration curve for an indirect control of the chloride diffusivity based on regular measurements of the electrical resistivity during concrete construction.

• Journal of Radiation Protection and Research
• /
• v.30 no.3
• /
• pp.113-119
• /
• 2005

The computed tomogrpahy(CT) provides a high quality in images of human body but contributes to the relatively high patient dose. The frequency of CT examination is increasing and, therefore, the concerns about the patient dose are also increasing. In this study the experimental determination of patient dose was performed by using a physical anthropomorphic phantom and thermoluminescent dosimeter(TLD). The measurements were done for the both axial and spiral scan mode. As a result the effective doses for each scan mode were 17.78mSv and 10.01 mSv respectively and the fact that the degree of the reduction in the patient dose depends on the pitch scan parameter was confirmed. The measurement methods suggested in this study can be applied for the reassessment of the patient dose when the technique in CT equipment is developed or the protocol for CT scanning is changed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.3B
• /
• pp.398-407
• /
• 2010

Due to increase of user requirement for various traffics and the advance of network technology, each distinct network has converge into FMC(Fixed Mobile Convergence) networks. However, we need to research the performance analysis of VoIP(Voice over Internet Protocol) in the FMC network to provide QoE for the voice user of FMC network. Therefore, this paper introduces the scenario which is the situation of voice quality degradation when a user uses VoIP to communicate with other users in the FMC network. Especially, this paper presents scenario in terms of the component of the network and finds the improvement point of voice quality. In the simulation results, three improvement points of voice quality are found as following: voice quality degradation by packet loss in the physical layer of the HSDPA network, by utilizing GGSN without QoS parameter mapping mechanism which is gateway between 3GPP and IP backbone, and by using non-QoS AP in the WLAN network.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.8 no.5
• /
• pp.516-524
• /
• 1997

The propagation properties of various pulse signal types(square pulse, Gaussian pulse, trapezoid pulse, RF pulse) on coupled microstrip lines are investigated. Numerical integration technique which has its accuracy and is easily simulated, is used to obtain the time domain response of pulse signals. Frequency-dependent characteristics of coupled microstrip line is obtained using Jansen's approximate equation. The propagation properties of pulse signal on coupled microstrip lines is analyzed regarding to its geometric structure (relative permittivity ${varepsilon}_r$ substrate height h, strip width w of the microstrip line) and pulse width ${\tau}$ of signal pulse. The simulation results show that space between two lines is very significant parameter in pulse distortion in comparison of any other parameters. The results of this paper are compatible to the trade-off determination of relative permittivity, substrate height, strip width and pulse width of signal pulse when a design of MIC and MMIC is necessary.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.2
• /
• pp.95-103
• /
• 2002

We know that the all of warfare system has been becoming complex and variety in warfield thru the Gulf-War. The all of warfare electronic systems is designed to inter-operate by networks in recently. Especially Warfare Equipment systems of Men-of-War(War ship) as like KDX(Korea Destroyer, Experimental), FF(Frigate), PCC(Costal Patrol Craft), Submarine are connected by Combat System Databus to the Command system(C2 System), so C2 system can control all of equipments in ship. In this view, the status of network(Combat System Databus) is very critical parameter in war field. So In this paper, we propose the method of Network Management System construction for War ship, and especially propose the architectural design of network management system for DX(Destroyer, Experimental) equipments using SNMP(Simple Network Management Protocol). And Link Utilization is monitored by simulation.