• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.7
• /
• pp.49-54
• /
• 2010

The cryogenic ball milling was performed on carbon nanotubes (CNTs) at an extremely low temperature to increase the dispersion of CNTs. The effects of milling speed and time on the deagglomeration and structural changes of CNTs were studied. FESEM was used to analyze the dispersion and the change of particle size before and after milling process. Transmission electron microscopic (TEM) analysis was also investigated the effect of cryogenic ball milling on the morphological characteristics of CNTs. The structural changes by the cryogenic ball milling process were further confirmed by x-ray diffraction (XRD) and Raman spectroscopic analysis. The results showed that the agglomeration of CNTs was significantly reduced and amorphous structure was observed at high milling speed. However, the milling time has no great effect on the dispersion property and structural change of CNTs compared with milling speed.

• Journal of the Korean Applied Science and Technology
• /
• v.27 no.4
• /
• pp.515-521
• /
• 2010

In this research, we were prepared the glazed ceramic samples by the change of the pigment content and investigated to reveal the standardized color. The chemical composition of the pigment was analyzed using a ICP-OES. XRF mapping and UV-Vis spectroscopy were used to evaluate the color property and surface homogeneity. The color development was observed as a result of analyzing the pigment content and change of the color. The pigment content and the spectral reflection showed the relation of the inverse proportion and the standardized color which could be revealed through analysis data.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.12
• /
• pp.35-44
• /
• 1994

In this paper, we propose a new modification method of the look-up table in self-organizing fuzzy control using look-up table. This method has the property that look-up table is modified to have fast response property. Its principle is that the controller forces the trajectory to go into the fast respose region which the error change amount is larger than the error at initial time whenever the reference or disturbance change. Also we introduce the variable learning speed coefficient which is proportional to distance from switching curve. And to demonstrate the applicability of the proposed method, we had simulation study for some examples and esecuted pole balance experiments with inverted pendulum.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.214-215
• /
• 2007

Int this paper, we studied the analysis on long-term durability and output power characteristics of PV modules by variation on local thermal property. Using 5 modules(80W), we measured the maximum output power change during the test period. And the optical transmittance of glass was compared with PV module's maximum power fluctuation. The external environment change effected contamination on the entire or local surface of module. This caused the local temperature variation of each solar cell on PV module. The specific analysis is shown in the following paper.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1667-1671
• /
• 2003

A computer program to calculate properties of nitrogen is developed. Procedures for the calculation is briefly discussed. The program calculates unknown thermodynamic properties fixing the state with two independent input properties. If input value by user is inappropriate, it displays an error message and replaces the input value with an appropriate one. In addition user can change units with easy. The program developed in this work can be utilized to calculate parameters required for the simulation and design of an equipment using nitrogen.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1366-1369
• /
• 2003

Today, the industries use polymer material for many purpose. Specially, it is important in automobile industry because tile costs of polymer hold high proportion of the overall cost. If we reduce the weight of automobile, fuel efficiency of car is raised and cost of bumper is lower. Therefore there are many efforts to reduce of car currently. The purpose of this paper is to reduce polymer used in car bumper.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.256-260
• /
• 2003

A computer program to calculate thermodynamic properties of oxygen is developed. Procedures for the calculation is briefly discussed. The program calculates unknown thermodynamic properties fixing the state with two independent input properties. If input value by user is inappropriate, it displays an error message. In addition user can change units with easy. The program developed in this work can be utilized to calculate parameters required for the simulation and design of an equipment using oxygen.

• KIEE International Transaction on Systems and Control
• /
• v.2D no.2
• /
• pp.92-96
• /
• 2002

This paper is concerned with properties of a Lyapunov functional of state delay systems. It is shown that if a state delay system has a pure imaginary pole for some state delay, then no Lyapunov functional satisfying a Lyapunov condition exists periodically with respect to change of the state delay. This periodic property is unique in state delay systems and has been well known in the frequency domain stability conditions. However, in the time domain stability conditions using a Lyapunov functional, the periodic property is not known explicitly.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.759-761
• /
• 2003

This test was performed to improve the cavitation property on hydro-turbine and the optimum quantity of aeration. Vibration and noise change according to hydro-turbine load. The results of aeration tests applied to chungju hydro-turbine.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2002.05a
• /
• pp.97-97
• /
• 2002