• 한국전기전자재료학회논문지
• /
• 제29권8호
• /
• pp.489-493
• /
• 2016

In this study, the effect of vanadium oxide ($V_2O_5$) content and pre-sintering atmosphere on sealing property of glass frit that consisted of $V_2O_5-BaO-ZnO-P_2O_5-TeO_2-CuO-Fe_2O_3-SeO_2$ was investigated by XPS (X-ray photoelectron spectroscopy). The content of V2O5 was changed to 15, 30, and 45 mol%, and the pre-sintering was carried out in air and $N_2$ condition, respectively. XPS analysis conducted before and after laser irradiation with identical sample. Before laser treatment, glass frits that were pre-sintered at air condition showed both $V^{4+}$ and $V^{5+}$, but the valence state was changed to $V^{5+}$ after laser irradiation when the glass frits contained 30 and 45 mol% $V_2O_5$; this change led to non-adhesive property. On the other hand, glass frits that were pre-sintered at $N_2$ condition exhibited only $V^{4+}$ and it showed fine adhesion irrespective of the $V_2O_5$ content. As a result, the existence of $V^{4+}$ seems to be a major factor for controlling the adhesive property of glass frit for laser sealing.

• 아시안잔디학회지
• /
• 제10권1호
• /
• pp.31-40
• /
• 1996

The mechanical expresion provides for the use of Soil property reserves and permanent protec-tion or improvement of soil resources in accordance with measurable standards. If the functions I (initial soil property), E (soil erosion), R (soil renewal), and M. (minimum allowable value) are assumed to be integrable in region A, erosion tolerance over a region is leaded to ${\int}_A{\int}I(m, cl, re, ch, b)dA-{\int}_A{\int}{\{\int}_{to}^{\infty}[E(w, re, c, re, ch, b, t)-R(m, ch, re, b, t)]dt}\dA{\geqq}{\int}_A{\int}M_i(m, cl, re, ch, b)dA$ were variable factors are m=parent material of soil, cl=climate, re=relief or topography, ch=soil characteristics, r=rain or water, w=wind, b=biota, and t=time.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권1호
• /
• pp.18-25
• /
• 2000

In the two-mass servo system driving a load through a flexible shaft, a shaft torsional vibration is often generated. PI controller has been generally used is speed control of such system because of the simplicity of structure and related theory. This paper presents the inertia ratio of the PI servo control system which can be designed by using optimal pole assignment method is fixed. Therefore, it's difficult to obtain the desired control characteristics for different systems only by PI control algorithm. To solve this problems the two-mass speed control system with PID controller is designed by using pole assignment method and an optimum PID parameters are derived by evaluating ITAE(Integral of time multiplied by the absolute error) performance index. But this design method has some problems due to a trade-off between the fast command following property and the attenuation of disturbances and vibrations. In this paper, 2-DOF PID control method which satisfies the command following property, the reduction of overshoot and the property of disturbance rejection at the same time is proposed. This is a practical speed controller using the desired value filter and the feedforward gain. From several simulations, it's clarified that the proposed 2-DOF PID controller is useful for the two-mass system, in comparison with the conventional PID controller.

• 한국컴퓨터정보학회논문지
• /
• 제24권5호
• /
• pp.19-26
• /
• 2019

In this paper, we consider the D2D Transmitter(Tx) and Receiver(Rx) pair assignment problem in the cellular system. Sharing the resource of the cellular system, D2D users may cause interference to the cellular system, though it is beneficial to improve the D2D user Capacity. Therefore, to protect the cellular users, D2D transmit power should be carefully controlled. Previously, optimal Tx-Rx assignment to minimize the total transmit power of users was investigated. Accordingly, the iterative algorithm to find the optimum Tx-Rx asignment was obtained. In this work, we consider the case where Tx group users becomes Rx group users, and Rx group users become Tx group users. We prove that the Tx-Rx assignment problem has the duality property. We present the numerical examples that show the duality between U-link and D-link.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.852-854
• /
• 2003

CNT paste was fabricated by mixture of multi-walled carbon nanotubes (MWNT) powder, organic vehicles and inorganic binder. Then firing process was performed at different temperature under air and $N_{2}$ atmosphere. It was found that emission property of CNT paste was changed by firing temperature and time due to interaction between remained resins and CNT powder. We obtained good emission property from CNT paste treated at $350^{\circ}C$ for 10 min.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2001년도 제33회 춘계학술대회 개최
• /
• pp.149-155
• /
• 2001

New semi-fluorinated polyol esters were synthesized by condensation reaction of polyols (NPG and TMP) and carboxylic acids such as 2-ethylhexanoic acid, stearic acid and perfluorooctanoic acid. The structures of polyol esters were confirmed by FT-IR and H-NMR etc. And, the fluorinated polyol esters were insoluble in several oils, however, the semi-fluorinated polyol esters were soluble in several oils depended on the structure of polyol esters. The physical properties such as 4-ball wear property and extreme-pressure (EP) properties were characterized by measuring wear scar diameter through ASTM D2266 and by determining the load-carrying through ASTM D2783 method, respectively. As the results, wear scar diameters of oils in which the semi-fluorinated polyol esters were added were not changed compared to those of not added oils. While extreme-pressure properties remarkably Increased with fluorine contents of the esters depended on the structure of acid moiety and polyol moiety. Also, the extreme-pressure property of semi-fluorinated NPG polyol ester in gasoline engine oil was better than that of commercial Teflon coating additive.

• 한국의류학회지
• /
• 제45권1호
• /
• pp.106-122
• /
• 2021

This study confirmed the mechanical properties of an auxetic re-entrant pattern prepared using 3D printing technology and its composite fabric with neoprene for the production of functional auxetic patterns/textiles for safety shoes. Samples were prepared by the tilt angle of a re-entrant pattern of 0°, 30°, 45°, 60° and 90°, and then analyzed using Poisson's ratio, bending, compression, and tensile properties. A 3D printed auxetic re-entrant pattern (3DP-RE) and its composite fabric (3DP-RE/NP) showed a negative Poisson's ratio in all tilting angles that indicated auxetic properties. The results of the bending property shown that strength of 3DP-RE/NP was 1.5 times lower than NP, but the strain improved 2.0 times. It was confirmed that the deformation of 3DP-RE/NP is possible with a low load. Each sample type of compression behavior indicated similar regardless of the tilting angles; in addition, the compression toughness of 3DP-RE/NP increased 1.2 times compared with NP. In the case of tensile properties, 3DP-RE and 3DP-RE/NP were affected by the tilting angle, samples with 90° (the opposite of load direction) showed best tensile property and toughness. 3DP-RE/NP indicated improved bending, compression, and tensile properties.

• Journal of applied mathematics & informatics
• /
• 제31권5_6호
• /
• pp.869-876
• /
• 2013

The design of large family size with the optimal cross-correlation property is important in spread spectrum and code division multiple access communication systems. In this paper we present the sequences with the decimation $d=2{\cdot}2^m-1$, calculate the cross-correlation spectrum for $0{\leq}t{\leq}2^n-2$ and count the number of the value $2^m-1$ occurring for $0{\leq}{\tau}2^n-2$. The sequences have the optimal cross-correlation property. The work on this paper can make it easier to count the number of the whole value occurring for $0{\leq}{\tau}2^n-2$.

• 생약학회지
• /
• 제48권3호
• /
• pp.195-201
• /
• 2017

To develop new therapy for prevention and treatment of hair loss is very important according to increase of the number of hair loss people. The aim of this study was to investigate the hair growth promoting effects of pectin lyase-modified red ginseng extract (GS-E3D). We examined antioxidant and anti-inflammatory effects, human hair dermal papilla cells (HHDPC) proliferation, and testoterone-induced $5{\alpha}$-reductase inhibitory effects. GS-E3D show not only 1,1-diphenyl-2-picryhydrazyl (DPPH) radical scavenging activity and xanthine oxidase inhibitory effects as an anti-oxidant property, but also lip-oxygenase and hyaluronidase inhibitory effects as an anti-inflammatory property. Human hair dermal papilla cells proliferation by GS-E3D was higher than those of minoxidil or finasteride, using the positive controls. Moreover, GS-E3D exhibited $5{\alpha}$-reductase inhibitory activities after stimulating by testoterone. The present results indicate that GS-E3D has a potential to be as an hair growth promoting agent for cosmetic materials.

• Advances in robotics research
• /
• 제2권1호
• /
• pp.33-44
• /
• 2018

This paper presents a novel feature detection algorithm called depth-hybrid speeded-up robust features (DH-SURF) augmented by depth information in the speeded-up robust features (SURF) algorithm. In the keypoint detection part of classical SURF, the standard deviation of the Gaussian kernel is varied for its scale-invariance property, resulting in increased computational complexity. We propose a keypoint detection method with less variation of the standard deviation by using depth data from a red-green-blue depth (RGB-D) sensor. Our approach maintains a scale-invariance property while reducing computation time. An RGB-D simultaneous localization and mapping (SLAM) system uses a feature extraction method and depth data concurrently; thus, the system is well-suited for showing the performance of the DH-SURF method. DH-SURF was implemented on a central processing unit (CPU) and a graphics processing unit (GPU), respectively, and was validated through the real-time RGB-D SLAM.