• Journal of Power System Engineering
• /
• v.5 no.1
• /
• pp.89-96
• /
• 2001

Decorative property of chromium deposition from oxalic acid bath containing chromium oxide and ammonium sulfate, has been examined over a wide range of bath compositions and plating conditions. The followings were determined as optimum bath composition, $CrO_3\;200{\sim}250g/{\ell},\;H_2C_2O_4{\cdot}2H_2O\;500{\sim}700g/{\ell},\;(NH_4){_2}SO_4\;40{\sim}120g/{\ell}$, and operation conditions; pH $2.0{\sim}2.5$, current density of $15{\sim}250Adm^2 $ at the bath temperatures of $30{\sim}80^{\circ}C$. Bright chromium deposits were obtained over a wide range of ammonium sulfate concentration, bath temperature, and current density. The current efficiency decreased with increasing current density and bath pH, and increased with Increasing bath temperature. The highest current efficiency was obtained in the bath containing $80g/{\ell}$ of ammonium sulfate. Bright chromium deposits were not obtained at conditions of all the highest current efficiencies.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2005.11a
• /
• pp.31-34
• /
• 2005

For the damage tolerance improvement of conventional laminated composites, stitching process has been utilized for providing through-thickness reinforcements. 2D prefonl1S were stacked with S-2 glass plain weave, and 3D preforms were fabricated using the stitching process. For the matrix system, epoxy and phenol resins were considered. To examine the damage resistance performance the low velocity drop weight impact test has been carried out, and the impact damage was examined by scanning image. CAI (Compressive After Ih1paet) tests were also conducted to evaluate residual compressive strength. Compared with 2D epoxy composites, 2D phenol composites showed drastic reduction in the compressive strength prior to impact because of the higher contents of voids. The damage area of 2D phenol composites were also larger than that of 2D epoxy composites. However, by introducing the stitching, the damage area of 3D phenol composites was reduced by 60%, while the CAI strength improvement was negligible.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.2
• /
• pp.125-131
• /
• 2016

According to the increment of urban buildings, the demand of eco-environment space will be also increased. Therefore, the artificial ground green system on a roof will be supplied gradually. In this study, the concept of simplification, unification and prefabrication was widely applied to supply green system. Consequently, the box unit system with a continuous soil layer was developed, and adhesive property, wind resistance and insulation property of this system were evaluated for site application. As a results of adhesive property and wind resistance test, comparing with design wind pressure and wind velocity, this system was safe at the height of 100m building located in urban. In addition, results of temperature measurement for 120 days showed 17% higher insulation property at daytime and 45% higher insulation property at night than normal box unit system owing to continuous soil layer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5A
• /
• pp.359-369
• /
• 2005

For large capacity optical CDMA networks, we propose a shared-type encoder/decoders based on an tunable wavelength converter(TWC) and an arrayed waveguide grating (AWG) router. The proposed encoder/decoder treats codewords of wavelength/time 2-D code simultaneously using the dynamic code allocation property of the TWC and the cyclic property of the AWG router, and multiple subscribers can share the encoder/decoder in networks. Feasibility of the structure of the proposed encoder/decoder for dynamic code allocation is tested through simulations using two wavelength/time 2-D codes, which are the generalized multi-wavelength prime code(GMWPC) and the generalized multi-wavelength Reed-Solomon code(GMWRSC). Test results show that the proposed encoder/decoder can increase the channel efficiency not only by increasing the number of simultaneous users without any multiple-access interference but by using a relatively short length CDMA codes.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.25 no.6_1
• /
• pp.565-574
• /
• 2007

Because of most current cadastral systems maintain 2D geometric descriptions of parcels linked to administrative records, the system may not reflect current tendency to use space above and under the surface. The land has been used in multi-levels, e.g. constructions of multi-used complex buildings, subways and infrastructure above/under the ground. This cadastre situation of multilevel use of lands cannot be defined as cadastre objects (2D parcel-based) in the cadastre systems. This trend has requested a new system in which right to land is clearly and indisputably recorded because a right of ownership on a parcel relates to a space in 3D, not any more relates to 2D surface area. Therefore, this article proposes a 3D spatial data model to represent geometrical and topological data of 3D (property) situation on multilevel uses of lands in 3D cadastre systems, and a conceptual 3D cadastral model in Korea to design a conceptual schema for a 3D cadastre. Lastly, this paper presents the results of an experimental implementation of the 3D Cadastre to perform topological analyses based on 3D Network Data Model to identify spatial neighbors.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.605-606
• /
• 2012

• The Pure and Applied Mathematics
• /
• v.25 no.2
• /
• pp.127-133
• /
• 2018

We look at Toeplitz arrays on ${\mathbb{Z}}^d$ and study a characterizing property for pure discrete spectrum in terms of the periodic structures of the Toeplitz arrays.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.2
• /
• pp.651-654
• /
• 2014

• Communications of the Korean Mathematical Society
• /
• v.35 no.1
• /
• pp.243-250
• /
• 2020

Hardy and Littlewood found a relation between the smoothness of the radial limit of an analytic function on the unit disk D ⊂ ℂ and the growth of its derivative. It is reasonable to expect an analytic function to be smooth on the boundary if its derivative grows slowly, and conversely. Gehring and Martio showed this principle for uniform domains in ℝ². Astala and Gehring proved quasiconformal analogue of this principle for uniform domains in ℝⁿ. We consider α-quasihyperbolic metric, k^α_D and we extend it to proper domains in ℝⁿ.

• 한국HCI학회:학술대회논문집
• /
• 2007.02a
• /
• pp.1-7
• /
• 2007

본 논문은 3차원 스캐너로 획득된 실제 얼굴 데이터를 햅틱 상호작용을 통해 직접 변형하고 재질감을 모델링 하는 알고리즘을 제안한다. 제안된 알고리즘은 그래픽 하드웨어 기반의 햅틱 렌더링 알고리즘을 기반으로 획득된 2.5D 얼굴 데이터를 mass-spring 모델을 적용하여 변형하고 얼굴의 재질감(탄성, 마찰, 거칠기) 정보를 모델링 하는 것이다. 햅틱 장치를 이용한 변형알고리즘은 변형 시 효율적인 변형 영역 탐색을 위하여 공간 분할방법인 k-d 트리 구조를 이용하여 최근방 탐색 알고리즘을 구현하였으며, 사실적인 힘 계산을 위하여 각 포인트 마다 mass-spring 모델을 적용하여 반력 연산 및 물체의 변형을 수행하였다. 아울러 재질감을 모델링 하기 위해 깊이 이미지 기반 표현(Depth Image Based Representation, DIBR)을 이용하여 가상 물체의 거칠기, 탄성, 및 마찰을 편집할 수 있는 방법론을 제시하고, 편집된 재질감을 직접 물체의 표면에 적용하여 렌더링 하는 알고리즘을 제안한다.