• Current Research on Agriculture and Life Sciences
• /
• v.15
• /
• pp.115-122
• /
• 1997

Grafting is an important skill for the stable supply and production of high quality. However, the shortage of skillful labor has become great difficulty for a mass production of grafting-seedling. In this study, a suitable mechanism for a grafting machine was developed. The following summarize the results of this study: 1. An insertion method was selected for mechanism of the grafting machine without bonding agent, clip, pin. This insertion-grafting method can be applicable to general vegetables and a mass production system. In addition to, this method is suitable for developing the grafting mechanism. 2. Growing point was removed while remaining both cotyledons on rootstock. The productivity of this system was five fold greater than the one of an experienced labor. 3. The rootstock processing was placed on left and scion processing unit was placed on right of the system, then processed rootstock and scion graft by rotating $180^{\circ}$. 4. The efficiency tests on mechanical grafting rate showed 98%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.74-80
• /
• 2021

This study investigated the process quality level of a K5 gas mask, which recently acquired its operational capability, through statistical process analysis for the mass production stages and their lots. The tensile adhesion strength was the only operating requirement in the manufacturing process of the K5 gas mask. For this purpose, the results of tensile adhesion strength between the lens and facial rubber during the initial and second mass production stages were analyzed using conventional statistical and statistical process analysis methods. The conventional statistical results indicated that the second mass production stage was better than the initial mass production stage. In cases of a control chart and process capability of tensile adhesion strength, the process quality level was also improved by following the mass production stages. The improvement was caused by process stabilization and work skill elevation. These results and methods are expected to be conducted and utilized in the third mass production stage. Moreover, quality improvement of K5 gas mask mass production can be achieved using the Lean 6 sigma procedure, MDAIC (Define, Measure, Analyze, Improve, Control).

• Journal of Korean Society of Forest Science
• /
• v.104 no.4
• /
• pp.607-614
• /
• 2015

This study aims to analyze the current status of timber production operation and the effects of the forestry mechanization projects on timber production. In order to increase the domestic timber production, it is necessary to propel forestry mechanization project, improve policy and institution, broaden forest-road network, enlarge the number of forest workers, enhance timber production and supply system, provide forestry machines, establish forest operation system, and train forest workers. In addition, the reestablishment of policy goals, the consistency of policy, and the rearrangement of laws and institution are considered more important. To improve the results and effects of forestry mechanization project, it is necessary to drive of forestry mechanization project, the spread of forestry machines, the cultivation of trainer ability, the development of training materials, and the teaching of field skill. In order to meet timber buyersí preference, timber needs to be produced through whole tree logging operation system. Expanding the proportion of domestic timber among total timber demand in Korea requires price competitiveness, and the supply ability of high quality product from the perspective of length and width.

• The Journal of the Korea Contents Association
• /
• v.8 no.2
• /
• pp.91-99
• /
• 2008

When making a comic film, the comic presentation that uses stress and exaggeration is the important subject among other things. In this study we tried to investigate the comic effect using the movement of three-dimensional shot. To conduct this study, we extracted the shot manufactured through the Flow Motion of a 3D Production Program Virtual Camera and a High Speed Motion Picture Camera. The shot manufactured applying this manufacturing skill and using three-dimensional production method for the video contents efficiently made was classified into several scenes. The focus of this study is to search for the factor that makes the atmosphere of a story comic through three-dimensional production shot. According to the shot analysis, three-dimensional production method plays a role in developing more stories on space and time by visualizing stories in three dimensions, which makes the most use of the movement of camera, lens and the utilization of focus. In addition, in the presentation where many comic and exaggerated factors are provided, we used the technology that stresses a scene using the size of a shot and the lasting time and presented the method that exaggerates space using a 3D Production Program Virtual Camera and a High Speed Motion Picture Camera. By reviewing the qualitative improvement and the efficient method on making comic films through the possibility that the atmosphere of this three-dimensional shot can apply to the effect for comic presentation, we tried to approach the comic presentation.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.5
• /
• pp.799-810
• /
• 2022

Welding work is a production work method widely used throughout the industry, and various types of welding technologies exist. In addition, many methods are being studied to automate these welding operations using robots, but in the ship manufacturing field, welding such as painting, cutting, and grinding is also the most common operation, but the manual operation ratio is higher than in other industries. Such a high manual labor ratio in the field of ship manufacturing not only causes quality problems and production delays according to the skill of workers, but also causes problems in the supply and demand of manpower. Therefore, this paper analyzed the reason why the automation rate is low in welding work at ship manufacturing sites compared to other industries, and analyzed the production process and field environment for small and medium-sized ship manufacturing companies that repeatedly manufactured with a small quantity production method. Based on the analysis results, it is intended to propose a robot system that can easily move between workplaces and secure uniform welding quality and productivity by collaborating simple welding tasks with humans. Finally, the simulation environment is constructed and analyzed to secure the suitability of robot system application to current production site environment, work process, and productivity, rather than to develop and apply the proposed robot system. Through such pre-simulation and robot system suitability analysis, it is expected to reduce trial and error that may occur in actual field installation and operation, and to improve the possibility of robot application and positive perception of robot system at ship manufacturing sites.

• The Journal of the Korea Contents Association
• /
• v.7 no.5
• /
• pp.36-46
• /
• 2007

This paper presents an automated English scoring system designed to help non-native speakers of English, Korean-speaking learners in particular. The system is developed to help the 3rd grade students in junior high school improve their English grammar skills. Without human's efforts, the system identifies grammar errors in English sentences, provides feedback on the detected errors, and scores the sentences. Detecting grammar errors in the system requires implementing a special type of rules in addition to the rules to parse grammatical sentences. Error production rules are implemented to analyze ungrammatical sentences and recognize syntactic errors. The rules are collected from the junior high school textbooks and real student test data. By firing those rules, the errors are detected followed by setting corresponding error flags, and the system continues the parsing process without a failure. As the final step of the process, the system scores the student sentences based on the errors detected. The system is evaluated with real English test data produced by the students and the answers provided by human teachers.

• The Korean Journal of Emergency Medical Services
• /
• v.10 no.3
• /
• pp.61-70
• /
• 2006

Purpose: The purpose of this study is to develop a realistic illustration using watercolors on a complete airway obstruction maneuver that is at an appropriate level for elementary school students from the first grade through the third. The illustration is a series of cuts divided into specific frames designed to illustrate the method to be followed in an action or a practical skill that would otherwise be too difficult to explain in written form. Methods: The fundamental theory of the Jeong In-Sung's instruction learning program based on the WEB to construct an appropriate site of instruction learning was used after modification. In this study analysis, design, and production stages were realized. Results: 1. In Stage 1, impressions of the illustration, in sketch form, were received. In Stage 2, results of impressions from a modified illustration were received. After an appropriate level of understanding and accuracy in the practical steps for emergency maneuvers were achieved the illustrations entering Stage 3 and color was added to the sketches. 2. In Stage 3, the illustration was completed by adding color to the contents for the practical steps in the complete airway obstruction maneuver. 3. For composition evaluation, a result of 100% appropriateness was obtained for both items of harmony between illustration and subject being studied and sufficiency in quantity of illustrations. Also high results for appropriateness in items such as clarity, creating interest, illustration size, and tone preference as related to content were achieved and thus completed the production stages. Conclusion: The Complete Airway Obstruction Maneuver Illustration developed specifically for the characteristics and cognitive level of elementary school students grade 1 through grade 3 was appropriate for teaching and learning. There is a need for future research on developed illustrations aimed at elementary school students grade 1 through 3 on the complete airway obstruction maneuver. There is also a need for continued effort in developing certified evaluating tools that can judge the suitability of illustrations and developing illustrations related to emergency maneuvers for various subjects and appropriate for learner level.

• The Journal of the Korea Contents Association
• /
• v.5 no.5
• /
• pp.115-123
• /
• 2005

Game industry will be one of the fastest developed industries in the 21st century. It is the outcome derived from the development of hardware such as the accumulated technology and computer in the 20th century. The development of computer graphics and hardware technique has let games have more realistic expression. The reality shown in games has influences over the movement of 3-dimensional game character as well as its background. The animation of character has been influenced by animator's level of skill, but it was problematic to have unnatural movement and long-term production time. In this regard, this study will compare the most widely used animation techniques such as Key-Frame method and Motion-Capture method each other and try to figure out which one is the most appropriate and effective method in 3 dimensional game character animation.

• Korean Journal of Community Nutrition
• /
• v.2 no.4
• /
• pp.605-615
• /
• 1997

The job characteristics and competencies of 285 dietitians in employee foodservices were investigated by worker-oriented job analysis methodology. The purposes of this study were to : a) determine the knowledge, abilities, skills and other characteristics(KASO) needed for dietitians in two types of employee foodservice groups(self-operated vs. contracted), b) categorize KASO items by factor analysis and c) provide job information and job descriptions for dietitians in employee foodservices. The job analysis questionnaire was consisted of questions concerning the 134 KASO items. The questionnaire was mailed to 250 dietitians who are members of The Korean Dietetic Association Practice Group in self-operated foodservices(group A) and 250 dietitians who are employed in contracted foodservice companies(group B). Completed questionnaires were received from 285 dietitians(121 in self-operated, 164 in contracted) ; with response rate of 57%. Statistical data analysis was completed using the SPSS/win and the SAS/win packages. The results of this study can be summarized as follows. 1) Through factor analysis, the 134 KASO items were regrouped into 6 categories :‘primary dietetic tasks concerning menu management and administrative work regarding merchants’, ‘primary dietetic tasks concerning procurement and purchasing of food and supplies and meal production and service control’, ‘primary dietetic tasks concerning facility, sanitation and safety control’, ‘secondary dietetic tasks concerning nutrition education and research’, ‘secondary dietetic tasks concerning foodservice operation management’and‘human attributes’. 2) Analysis of the total scores(average scores of degree of frequency, importance and entry requirements of KASO items within 6 categories), group A showed high priorities placed on‘human attributes’, ‘procurement and purchasing of food and supplies and meal production and service control’, ‘menu management and administrative work regarding merchants’, ‘whereas group B showed high priorities placed on’‘human attributes’, ‘foodservice operation management’. (Korean J Community Nutrition 2(4) : 605-615, 1997)

• Korean Journal of Heritage: History & Science
• /
• v.35
• /
• pp.138-158
• /
• 2002

To compare and analyze technical system related to manufacturing of ironware during the period of the Three Kingdoms, an analysis was conducted on the minute system of metalwork, as study objects, of the remains of the Mt. Wolpyeong fortress wall in Daejeon in the period of capital during the era of the Three Kingdoms in the 5th century, the Sanwol-ri remains in the 6th century in Gunsan and the remains of ironware excavated from the great ancient tomb of Hwangnam of the Silla dynasty in the 5th century. The result of analysis shows that in the most of the casting products, the minute system of white cast iron were contained. While the iron part of decarbonization was in the system by casting as white cast iron in the central part, on the surface layer it was turned out that comparatively uniform 100% pearlite system of about 1~2mm degree was existing. The part of pearlite on the surface layer was caused by decarbonization, which appears in all the parts of blade front end and handle. Therefore, it was found that the iron part of decarbonization was manufactured by casting, and then was processed at the high temperature by decarbonization. For the products of forging, after processing the products on the basis of pure iron for materials, they manufactured the ironware that raises the strength by carbonizing that keeps carbon infiltrated on the necessary part, by the method of black smith welding that add pure iron to steel, or by varying the method of heat processing onto the part required of strength. Though limited, we could understand that the technical systems for manufacturing skill of ironware in the areas of Baekje and Silla were different each other. In the technical system for Hwangnam great ancient tomb in the Silla area, it is found that they had raised the strength on the necessary part by applying the steelmaking method of carbonizing in the last stage of production of products, in the meantime in Baekje area, it appears that they had produced steel in advance in the first stage of production of the products, and used the produced steel only to the necessary part.