• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 B
• /
• pp.376-379
• /
• 2003

DNA computing based DNA sequence Is operated through the biology experiment. Biology experiment used as operator causes illegal reactions through shifted hybridization, mismatched hybridization, undesired hybridization of the DNA sequence. So, it is essential to design DNA sequence to minimize the potential errors. This paper proposes method of the DNA sequence generation based evolutionary operation processor. Genetic algorithm was used for evolutionary operation and extra hardware, namely genetic algorithm processor was implemented for solving repeated evolutionary process that causes much computation time. To show efficiency of the Proposed processor, excellent result is confirmed by comparing between fitness of the DNA sequence formed randomly and DNA sequence formed by genetic algorithm processor. Proposed genetic algorithm processor can reduce the time and expense for preparing DNA sequence that is essential in DNA computing. Also it can apply design of the oligomer for development of the DNA chip or oligo chip.

• International journal of advanced smart convergence
• /
• 제11권1호
• /
• pp.28-35
• /
• 2022

This paper presents a performance evaluation of real-time Linux for industrial real-time platforms. On industrial platforms, multicore processors are popular due to their work distribution efficiency and cost-effectiveness. Multicore processors, however, are not designed for applications with real-time constraints, and their performance capabilities depend on their core configurations. In order to assess the feasibility of a multicore processor for real-time applications, we conduct a performance evaluation of a general processor and a low-power processor to provide an experimental environment of real-time Linux on both Xenomai and RT-preempt considering the multicore configuration. The real-time performance is evaluated through scheduling latency and in an environment with loads on the CPU, memory, and network to consider an actual situation. The results show a difference between a low-power and a general-purpose processor, but from developer's point of view, it shows that the low-power processor is a proper solution to accommodate low power situations.

• 대한임베디드공학회논문지
• /
• 제3권4호
• /
• pp.251-259
• /
• 2008

This paper presents the hardware design of a 32bit floating point based processor. The processor can perform nonlinear functions such as sinusoidal functions, exponential functions, and other mathematical functions. Using the Taylor series and Newton - Raphson method, nonlinear functions are approximated. The processor is actually embedded on an FPGA chip and tested. The numerical accuracy of the functions is compared with those computed by the MATLAB and confirmed the performance of the processor.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 II
• /
• pp.843-846
• /
• 2003

In this paper, we have analyzed algorithm of physical layer, data link layer and MAC layer of Out-Of-Band (OOB) specified in the OpenCabl $e^{TM}$SCTE-55-2 2002$^{[3]}$ and designed architecture of the OOB processor. The OOB processor performs fundamental multiple access control for the OOB channel and extracts session key information from a EMM packet for descrambling MPEG-2 streams. In this paper, we have implemented a prototype board for the DVS167 OOB processor and verified it.t.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(2)
• /
• pp.101-104
• /
• 2001

In this paper, we have analyzed algorithm about physical layer, data link layer and MAC layer of out-of-band specified in the DVS 178 and designed architecture of Out-of-band processor. Out-of-band processor extracts session key information from EMM packet to descramble MPEG-2 TS packet scrambled. Also, analyze EAS Packet including emergency alert information to provide emergency communications such as national emergency. In this paper, we have implemented prototype board for out-of-band processor.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 추계종합학술대회 논문집
• /
• pp.416-420
• /
• 1999

This paper describes a 32-bit RISC processor, which has instruction level compatibility with the ARM7 microprocessor. The processor is fully synthesizable, and its performance is evaluated based on 0.35-${\mu}{\textrm}{m}$ CMOS library. This paper focuses on the implementation of the processor and the reliable verification strategy ensuring the complete instruction level compatibility. The processor has successfully verified using a FPGA chip.

• 한국컴퓨터정보학회지
• /
• 제2권2호
• /
• pp.19-26
• /
• 1996

윈도우 등 GUI 환경이 급속히 보급됨에 따라 워드프로세서도 매우 발전하고 있다. 이에 따라 본 논문에서는 현재 보급된 윈도우용 워드프로세서를 분석하여 문제점과 개선점을 제시하고 멀티미디어 시대에 대응한 워드프로세서의 방향에 대하여 고찰하고자 한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.731-734
• /
• 2009

KIER has been developed a compact and highly efficient fuel processor which is one of the key component of the residential PEM fuel cells system. The fuel processor uses methane steam reforming to convert natural gas to a mixture of water, hydrogen, carbon dioxide, carbon monoxide and unreacted methane. Then carbon monoxide is converted to carbon dioxide in water-gas-shift reactor and preferential oxidation reactor. A start-up time of the fuel processor is about 1h and CO concentration among the final product is maintained less than 5 vol. ppm. To achieve high thermal efficiency of 80% on a LHV basis, an optimal thermal network was designed. Internal heat exchange of the fuel processor is so efficient that the temperature of the reformed gas and the flue gas at the exit of the fuel processor remains less than $100^{\circ}C$. A compact design considering a mixing and distribution of the feed was applied to reduce the reactor volume. The current volume of the fuel processor is 17L with insulation.

• ETRI Journal
• /
• 제34권1호
• /
• pp.44-54
• /
• 2012

Because of the intrinsic lack of internal-system observability and controllability in highly integrated multicore processors, very restricted access is allowed for the debugging of erroneous chip behavior. Therefore, the building of an efficient debug function is an important consideration in the design of multicore processors. In this paper, we propose a flexible on-chip debug architecture that embeds a special logic supporting the debug functionality in the multicore processor. It is designed to support run-stop-type debug functions that can halt and control the execution of the multicore processor at breakpoint events and inspect the possible causes of any errors. The debug architecture consists of the following three functional components: the core debug support block, the multicore debug support block, and the debug interface and control block. By embedding this debug infrastructure, the embedded processor cores within the multicore processor can be debugged simultaneously as well as independently. The debug control is performed by employing a JTAG-based scanning operation. We apply this on-chip debug architecture to build a debugger for a prototype multicore processor and demonstrate the validity and scalability of our approach.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권12호
• /
• pp.723-731
• /
• 2005

The $4{\times}4$ homogeneous transformation matrix is a compact representation of orientation and position of an object in robotics and computer graphics. A coordinate transformation is accomplished through the successive multiplications of homogeneous matrices, each of which represents the orientation and position of each corresponding link. Thus, for real time control applications in robotics or animation in computer graphics, the fast multiplication of homogeneous matrices is quite demanding. In this paper, a parallel-architecture vector processor is designed for this purpose. The processor has several key features. For the accuracy of computation for real application, the operands of the processors are floating point numbers based on the IEEE Standard 754. For the parallelism and reduction of hardware redundancy, the processor takes column vectors of homogeneous matrices as multiplication unit. To further improve the throughput, the processor structure and its control is based on a pipe-lined structure. Since the designed processor can be used as a special purpose coprocessor in robotics and computer graphics, additionally to special matrix/matrix or matrix/vector multiplication, several other useful instructions for various transformation algorithms are included for wide application of the new design. The suggested instruction set will serve as standard in future processor design for Robotics and Computer Graphics. The design is verified using FPGA implementation. Also a comparative performance improvement of the proposed design is studied compared to a uni-processor approach for possibilities of its real time application.