• 한국시뮬레이션학회논문지
• /
• 제26권1호
• /
• pp.55-67
• /
• 2017

한국군 소요체계는 2007년부터 합동전투발전체계(JCDS)를 도입 후 하향식(Top Down) 능력기반 소요체계를 적용 중에 있다. 그러나 이러한 새로운 체계가 현 소요체계와 연계성을 가지고 원활히 추진되어 오지 못하고 있다. 또한 현재의 분석평가 방법론은 시간 소모적이고 많은 비용이 요구되어지고 있고 전체적 관점에서 문제가 무엇인지? 문제에 대한 합리적 대안이 무엇인지를 알 수가 없었으며, 최근에 도입된 능력기반평가에서도 신속하고 신뢰성있는 방법론을 제시하지 못하고 있는 실정이다. 따라서 본 연구의 주목적은 소요를 기획하기 위한 분석평가 단계에서 고가의 시뮬레이션 도구를 이용한 정밀 시뮬레이션 대신 시간과 노력의 낭비를 최소화하여 효과적인 능력기반평가를 실시하기 위해 미군 능력기반평가(CBA)에서 강력히 권고하고 있는 Quick Look의 개념을 반영하고, 신뢰성 있는 분석결과를 얻기 위해 미군 및 한국군에서 운용하고 있는 전구급 워게임 모형인 JICM(Joint Integrated Contingency Model)의 무기점수를 활용하여 정량적인 능력평가를 실시할 수 있도록 실증적 방법론을 제시하고자 한다.

• 한국항공운항학회지
• /
• 제26권2호
• /
• pp.68-75
• /
• 2018

A flare from an Air Force fighter was abnormally dispensed during the landing. To determine the cause of the abnormal dispensing, fracture analysis, signal analysis and reproduction experiments based on physics of failures were performed. The primary cause of the failure was analyzed to be due to an intermittent fault of an internal circuit card in the AN/ALE-40 chaff/flare dispenser by a broken lid of a capacitor, and the root cause which had derived the primary cause was considered to be an improper handling during the domestic maintenance which were changed from the overseas maintenance due to the DMSMS problem. Therefore, the overall process of the maintenance capability development system was reviewed and alternative ways that considers maintenance error decision aid(MEDA) for system improvement were suggested to prevent further failures.

• 산업경영시스템학회지
• /
• 제42권1호
• /
• pp.151-157
• /
• 2019

This study is about the process capability index (PCI). In this study, we introduce several indices including the index $C_{PR}$ and present the characteristics of the $C_{PR}$ as well as its validity. The difference between the other indices and the $C_{PR}$ is the way we use to estimate the standard deviation. Calculating the index, most indices use sample standard deviation while the index $C_{PR}$ uses range R. The sample standard deviation is generally a better estimator than the range R. But in the case of the panel process, the $C_{PR}$ has more consistency than the other indices at the point of non-conforming ratio which is an important term in quality control. The reason why the $C_{PR}$ using the range has better consistency is explained by introducing the concept of 'flatness ratio'. At least one million cells are present in one panel, so we can't inspect all of them. In estimating the PCI, it is necessary to consider the inspection cost together with the consistency. Even though we want smaller sample size at the point of inspection cost, the small sample size makes the PCI unreliable. There is 'trade off' between the inspection cost and the accuracy of the PCI. Therefore, we should obtain as large a sample size as possible under the allowed inspection cost. In order for $C_{PR}$ to be used throughout the industry, it is necessary to analyze the characteristics of the $C_{PR}$. Because the $C_{PR}$ is a kind of index including subgroup concept, the analysis should be done at the point of sample size of the subgroup. We present numerical analysis results of $C_{PR}$ by the data from the random number generating method. In this study, we also show the difference between the $C_{PR}$ using the range and the $C_P$ which is a representative index using the sample standard deviation. Regression analysis was used for the numerical analysis of the sample data. In addition, residual analysis and equal variance analysis was also conducted.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1994년도 춘계공동학술대회논문집; 창원대학교; 08월 09일 Apr. 1994
• /
• pp.344-354
• /
• 1994

In the development of executive information systems (EIS) the selection of an appropriate software package as a system building tool is regarded as a key technology. This paper attempts to shed some light on the evolving field of EIS software packages and provides a helpful Guideline for selecting the most suitable product by addressing significant considerations. A framework is presented that includes a six-step evaluation process: need analysis, team building, vendor survey, identification of decision criteria, and building an evaluation model and its verification. The major evaluation criteria of the full-featured software include: special functionality, reporting, graphics. decision support capability user friendliness, general functionality physical requirements, communication linkage, vendor support, cost related factors, performance, and documentation capability. An illustrative model using the analytic hierarchy process (AHP) method is also discussed to prove the appropriateness of our approach.

• 품질경영학회지
• /
• 제42권4호
• /
• pp.607-616
• /
• 2014

Purpose: This paper reviews popular measurement system indices and proposes a procedure for assessing a measurement system using two parameters with intraclass correlation and a factor for process capability. Methods: Gage Repeatability and Reproducibility(GR&R), precision-to-tolerance ratio(PTR), number of distinct categories, producer's and consumer's risks are employed to assess the measurement capabilities and discuss the relationships between measurement system metrics. Results: Two-dimensional plot by two parameters is presented to assess adequacy of the measurement system and process capability. A numerical example and previously studied case study are provided for illustration. Conclusion: The procedure proposed in this paper using two-dimension parameters provides a valuable procedure and helpful guidelines to quality and production managers in assessing the capabilities of a measurement system and choosing the needed actions to be the most benefit.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권5호
• /
• pp.127-134
• /
• 2021

This study aims to determine the role of innovative capabilities as a mediator in analyzing entrepreneurial marketing's effect on sustainable competitive advantage in food and beverage micro-, small-, and medium- enterprises (MSMEs). Data was obtained from a food and beverage store manager in Tangerang City, comprising 119 samples. Furthermore, the G⁎Power, a tool used to calculate statistical power analysis for various t-tests, F tests, χ2 tests, z tests, and several exact tests, was used to determine the number of research samples, the α error probability of 5%, and 3 variables. The data collection method used questionnaires with Likert Scale 1-5 to indicate strongly disagree to strongly agree. To analyze data, we used Path Analysis supported by SmartPLS statistics software. Path analysis is a form of multiple regression statistical analysis that is used to evaluate causal models by examining the relationships between a dependent variable and two or more independent variables. It aims to provide estimates of the magnitude and significance of hypothesized causal connections between sets of variables. The data processing process took place in two stages, namely the estimation model testing with validity and reliability, and the structural model testing to decide the impact or correlation between variables utilizing the t-test. The result showed a positive and significant effect of entrepreneurial marketing to innovative capability and competitive advantage through the innovative capability of MSMEs.

• 한국산학기술학회논문지
• /
• 제22권1호
• /
• pp.74-80
• /
• 2021

본 연구는 최근 전력화가 완료되어 양산이 진행 중인 K5 방독면에 대한 공정품질 수준을 평가하기 위하여 통계적 공정관리 기법을 활용하여 양산 단계 및 로트 별 분석을 수행하였다. 렌즈의 접착강도는 K5방독면의 기술적 요구사항 중 유일하게 생산 공정 간 평가하는 항목으로, 초도 및 2차 양산간 획득된 고무안면부와 렌즈 사이의 접착정도를 측정한 시험결과를 바탕으로 기술통계 및 통계적 공정관리 기법을 적용하여 분석하였다. 기술통계 분석결과에 따르면 초도 양산 대비 2차 양산 공정에 대한 결과가 더 좋음을 나타내고 있었다. 통계적 공정관리 기법인 관리도 분석과 공정능력지수에 대한 양산 단계 별 분석결과, 공정품질 수준 또한 양산이 진행됨에 따라 향상되고 있음을 확인 할 수 있었다. 이는 공정이 점차 안정화 되고 업무 숙련도에 의해 개선이 되고 있음을 보여주고 있었다. 이에 초도 및 2차 양산 간 획득된 성능시험 결과를 바탕으로 향후 3차 양산을 위한 기초자료로서 활용하고자 한다. 더불어 린6시그마의 DMAIC[Define(정의)-Measure(측정)-Analyze(분석)-Improve(개선)-Control(관리)] 방법론을 통해서 K5방독면의 품질향상 등의 목표달성을 수행할 예정이다.

• ETRI Journal
• /
• 제36권3호
• /
• pp.490-497
• /
• 2014

The market performance of WiBro in Korea has not been as expected, and its rapid diffusion in the near future is unlikely owing to the existence of competing services. There has been little research on the factors affecting this low market diffusion. This study is based on an analytical framework in which a lack of service capability and the insufficiency of service-related activities have resulted in the current poor market performance. An expert survey was conducted on WiBro specialists and verified using the analytical hierarchy process method. The result of this analysis is as follows: underinvestment in network deployment and marketing, insufficient promotional policies, and a shortage of service capabilities are to be analyzed as the main causes of WiBro's low market diffusion.

• 전기학회논문지
• /
• 제56권1호
• /
• pp.14-17
• /
• 2007

Power system restoration following a massive blackout starts with re-energizing primary restorative transmission systems at first. The comparison of the TLCC(transmission line charging capacity) and the RPC(reactive power capability) of related black-start generator should be considered in this stage because overvoltage can be caused by self-excitation at the generator when the RPC is smaller than the TLCC. The RPC can be decided by two criteria. One is stator end core heating, and the other is steady state stability. RPC in steady state stability area has been found based on a synchronous reactance Xd. This paper presents RPC limit of salient pole machine which is different from that of non-salient pole machine in steady state stability area and shows derivation process about that.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.81-84
• /
• 2001

An inverse finite element approach is employed for more capability to design the optimum blank shape from the desired final shape with small amount of computation time and effort. In some drawing or stamping simulation with inverse method, it is difficult to apply inverse scheme due to the large aspect ratio or steep vertical angle of inclination. The reason is that initial guesses are hard to make out with present method for those cases. In this paper, a direct mesh marring scheme to generate initial guess on the sliding constraint surface described by finite element patches is suggested for one step inverse analysis to calculate initial blank shape. Radial type mapping is adopted for the simulation of rectangular cup drawing process with large aspect ratio and parallel type mapping for the simulation of S-Rail forming process with steep vertical angle of inclination.