• Radiation Oncology Journal
• /
• v.9 no.2
• /
• pp.253-263
• /
• 1991

Twenty-seven patients with unresectable extrahepatic bile duct carcinoma (n=21) or with microscopic evidence of tumor rest after aggressive surgery for extrahepatic bile duct carcinoma (n=6) between 1985 and 1990 were given radiotherapy consisting intentionally external radiotherapy and/or intraluminal therapy using Gamma-Med 12i (192-Ir) high dose rate (HDR) remote control afterloading system following bile drainage procedures and Gianturco stent insertion. The objectives of this study has been to assess the feasibility and effects on survival of a combination of external radiotherapy and brachytherapy with which we hope to achieve optimal loco-regional control for patients with unresectable extrahepatic bile duct tumors. Sixteen patients were men and eleven were women, and the mean age was 58 years (34-70). 10MV X-ray was used for radiation therapy, with the total dose ranging from 45 Gy to 55 Gy, and intraluminal brachytherapy performed after external radiotherapy, with the dose of total 15 Gy. The minimum follow up was 12 months. Failure were predominantly local-regional, without distant failure. Median survival was 10 months; 2-year actuarial survival rates was $21\%$. Median survival for common hepatic duct (CHD) cancer was 9 months; for common bile duct (CBD) cancer, was 16 months. And median survival for incomplete surgery/external radiotherapy group and external/intraluminal radiotherapy group was 10 months; for external radiotherapy alone group, was 6 months. Use of chemotherapy and/or hyperthermia were not affected in survival. Therefore, our result is that the survival rates in the group of external/intraluminal radiotherapy were comparable with ones in the group of incomplete resection/external radiotherapy, and so we believe that the aggressive local and regional radiotherapy can improve the quality of life and the survival length.

• Tunnel and Underground Space
• /
• v.22 no.4
• /
• pp.266-275
• /
• 2012

In this study, a method is devised to implement a supercritical $CO_2$ ($scCO_2$) injection environment on a laboratory scale and to investigate the effects of $scCO_2$ on the properties of rock specimens. Specimens of shale and sandstone normally constituting the cap rock and reservoir rock, respectively, were kept in a laboratory reactor chamber with $scCO_2$ for two weeks. From this stage, a chemical reaction between rock surface and the $scCO_2$ was induced. The effect of saline water was also investigated by comparing three conditions ($scCO_2$-rock, $scCO_2-H_2O$-rock and $scCO_2$-brine(1M)-rock). Finally, we checked the changes in the properties before and after the reaction by destructive and nondestructive testing procedures. The swelling of shale was a main concern in this case. The experimental results suggested that $scCO_2$ has a greater effect on the swelling of the shale than pure water and brine. It was also observed that the largest swelling displacement of shale occurred after a reaction with the $H_2O-scCO_2$ solution. The results of a series of the destructive and nondestructive tests indicate that although each of the property changes of the rock differed depending on the reaction conditions, the $H_2O-scCO_2$ solution had the greatest effect. In this study, shale was highly sensitive to the reaction conditions. These results provide fundamental information pertaining to the stability of $CO_2$ storage sites due to physical and chemical reactions between the rocks in these sites and $scCO_2$.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.21 no.1
• /
• pp.60-64
• /
• 2017

Purpose Westgard multi-rules application based on test quality improvement and commercialized international standard has been widely used in quality control. However, it is difficult to applicate the Westgard multi-rules in nuclear medicine in vitro tests due to the larger sample sizes and the simultaneous measurement of quality control material and patient sample. This study investigated the usefulness of Westgard multi-rules application in nuclear medicine in vitro tests. Materials and Methods A total of 282 systematic error multi-rules (22s, 101s) recorded in the samsung medical center computer system from January 2013 to June 2016 along with 117 cases of corrective measure record was analyzed. The Quality control implementation is recorded in Hospital information system were divided into 4 high-level areas including quality control material error, experimental procedural error, Kit lot number management error, and others. To prevent quality control material error, the existing method that each staff used their own method was changed. The staff who in charge of managing the quality control material was designated and daily consumption amount of every test was strictly controlled by one person. To prevent other errors, every test step was standardized so that the entire test procedures are identically implemented. Results The total quality control implementation was 117 cases; As a result, 62 quality control material errors were 62 cases, experimental process errors were 24 cases, Kit lot number control errors were 18 cases, and other errors were 13 cases. The quality control material error was corrected and could be used fresh materials within 2 days after thawing. The cases of systemic error were decreased to causes as quality control material error. The quality control materials were reduced above 10 vials to a monthly average. In addition, these errors of experimental processing and Kit lot number were improved by test standardization. Consequently, the cases of 101s and 22s in systematic error rules decreased at least 2 cases to a monthly average. Conclusion To confirm of systematic error through multi-rules application quickly, it is necessary to base on management of the QC material, target values and standard deviation. Moreover, in the event of a systematic error, it was found important to record measures based on test cause analysis. The experiment results are expected to contribute to internal quality control improvement and prompt and accurate result reporting through error recording and causal analysis based on Westgard multi-rules analysis.

• Journal of Food Hygiene and Safety
• /
• v.30 no.3
• /
• pp.217-226
• /
• 2015

This study was conducted to establish a standardized process for developing food safety health indicators. With this aim, we proposed a standardized process, accessed the validity of the suggested process by performing simulations, and provided a method to utilize the indicators. Developing process for domestic environmental health indicators was benchmarked to propose a standardized process for developing food safety health indicators, and DPSEEA framework was applied to the development of indicators. The suggested standardized process consists of an exploitation stage and a management stage. In the exploitation stage, a total of 6 procedures (initial indicators suggestion, candidate indicators selection, data availability assessment, feasibility assessment, pilot study, and final indicator selection) are conducted, and the indicators are routinely calculated and officially announced in the management stage. The exploitation stage is operated by an interaction between a task force team who manages the overall process, and an advisory committee (minimum of 4 in academia, 2 in research, 4 in specialists of Ministry of Food and Drug Safety) who reviews and performs evaluations on the indicators. The standardized process was simulated with 45 initial indicators, and total of 4 indicators (17 detailed indicators) were selected: 'Proportion of domestic fruit/vegetable receiving 'acceptable' in the evaluation of pesticide/herbicide residues', 'Food-borne disease outbreaks', 'Food-borne legal infectious disease incidence', 'Salmonellosis incidence'. Synthetic food safety health index was derived by calculating percent difference with the data from 2010 to 2012. Results showed that when comparing the year 2010 to 2011, and 2011 to 2012, the overall food safety status improved by 10.37% and 9.87%, respectively. In addition, the contribution of indicators to the overall food safety status can be determined by looking into the individual indicators, and the synthetic index may be illustrated to enhance the ease of interpretation to the public and policy makers. In overall, food health safety indicators can be useful in many ways and therefore, attention should be drawn to conduct further studies and establish related legislations.

• Journal of Korean Neurosurgical Society
• /
• v.30 no.sup1
• /
• pp.99-107
• /
• 2001

Objective : Hydrocephalus and vasospasm are the common complications following subarachnoid hemorrhage (SAH). In spite of development of perioperative management and operative technique, hydrocephalus cause neurological deficit and poor prognosis. Usually CSF drainage procedure(external ventricular drainage(EVD) or shunt) is needed in hydrocephalus following SAH. The aim of this study was to investigate whether the need for shunting and the outcome after shunting in hydrocephaus following SAH can be related to the duration, daily and total amount of cerebrospinal fluid(CSF) drainage at EVD. Material and Method : IVH is one of several factors which cause hydrocephalus. In this retrospective study, firstly we investigated the incidence of IVH in total cases and frequency of IVH according to aneurysmal site and then prognosis of IVH following SAH. Among 629 patients with SAH, hydrocephalus was diagnosed by CT scan and symptoms. And then those 102 hydrocephalus following SAH were divided into two groups which were hydrocephalus with IVH group and without IVH group. In these two groups, we investigated and compared the incidence of hydrocephalus in all case, frequency of hydrocephalus according to aneurysmal site, the outcome according to H-H grade on admission and the need rate of shunt, etc. Of those hydrocephalus, 100 EVD procedures were done. The duration, daily and total amount of CSF drainage at EVD were investigated. Fifty cases expired during EVD was excluded. We analyzed whether the need rate of shunt and the final outcome after shunting can be related to IVH, the duration and daily and total amount of CSF drainage. Result : The incidence of hydrocephalus following SAH was 20%(with IVH group ; 64%, without IVH group ; 11%). As H-H grade on admission was better, the outcome of hydrocephalus was also better. The mortality rate of hydrocephalus with IVH was 64% which was higher than 40% that of hydrocephalus without IVH. The need rate of shunt in all cases of hydrocephalus following SAH was 20%, but those with IVH group excluding expired patients before shunt was 40%. This was very similar to 41% of the need rate of shunt in hydrocephalus without IVH. The total amount of CSF drainage was statistically related to the need rate of shunt(total amount : need rate of shunt/<1000cc : 15%, 1000-2000cc : 40%, >2000cc : 50%). The duration and daily amount of CSF drainage were not statistically related to the need rate of shunt, but as daily amount of CSF drainage was more and duration was longer, the need rate of shunt was increased(daily amount : need rate of shunt /<100cc : 16%, 100-200cc : 25%, >200cc : 40%//duration : need rate of shunt/<1week : 8%, 1-2weeks : 30%, >2weeks : 47%), and also the final outcome after shunting was poor. Especially the total amount of CSF drainage was significant related to the final outcome after shunting(total amount : GOS/<1000cc : I&II(3/4), 1000-2000cc : II(2/4), III(2/4), >2000cc : III&IV(6/7)). Conclusion : This study revealed that the incidence and mortality rate of hydrocephalus following SAH were influenced by IVH. So SAH associated IVH has the higher incidence of hydrocephalus and poor outcome. As the CSF drainage amount was more and duration of drainage was longer, the need rate of shunt was increased and the final outcome after shunting was poor. Especially the total amount of CSF drainage were strongly related to the need rate of shunt and the outcome after shunting.

• Restorative Dentistry and Endodontics
• /
• v.30 no.1
• /
• pp.38-48
• /
• 2005

The purpose of this study was to compare and evaluate the shaping ability of the three different Ni-Ti file systems used by undergraduate students. Fifty undergraduate students prepared 150 simulated curved root canals in resin blocks with three Ni-Ti file systems - $ProFile^{(R)}$ (PF), Manual $ProTaper^{(R)}$ (MPT), Rotary $ProTaper^{(R)}$ (RPT). Every student prepared 3 simulated root canals with each system respectively. After root canal preparation, the Ni-Ti files were evaluated for distortion or breakage Assessments were made according to the presence of various types of canal aberrations. The pre- and post-instrumented canal images were attained and superimposed. The instrumented root canal width were measured and calculated for the net transportation (deviation) and the centering ratio. Under the condition of this study, both $ProTaper^{(R)}$ systems allowed significantly more removal of root canal wall than the $ProFile^{(R)}$ system. In the important other aspects such as the centering ratio, there was no significant differences between the systems. Novice dental students were able to prepare curved root canals with any kinds of Ni-Ti file systems with little aberration and great conservation of tooth structure. Students want to learn effective methods and at the same time simple rotary procedures. The rotary $ProTaper^{(R)}$ systems were one of the most compatible to these students from the point of view of cutting ability The $ProFile^{(R)}$ system was also compatible in safe and gentle shaping.

• Journal of Korean Society of Forest Science
• /
• v.79 no.2
• /
• pp.187-195
• /
• 1990

The following conclusions have been obtained with special reference to the walnut marketing system in Cheonwongun districts 1. The marketing channel of walnut in the producing areas was mainly depended on the individual selling by 89.58%. and sale through farmer's coops and forest owner's association by 10.42%, and share of walnut through fatmer's coops was 84.58%. 2. The market structure in assembling stage of walnut can be represented as oligopoly considering the market share of 86.26% derived by CR3 method. 3. Direct selling from producers to consumers would be recommendable to reduce marketing margin considering the 77.20% of sale's dependency on assembler-commisioner. 4. Two major reasons to follow the marketing channel of assembler-commissioner were the convieniency (45.00%) and dealing with small quantity of walnut (20.00%). Let the walnut producers follow the institutional marketing channels such as farmer's coops and forest owner s association, special actions including better conveniency, smaller quantity and the procedures should be improved. 5. Farmer's share of walnut was estimated as 54.93% and total marketing margin was 45.0% of which 36.70% destined to the retail stage. 6. The price index in November was the lowest(83.63) due to the flood and hunger sale and the index in April was the highest(115.74). To cope with the severe price fluctuation and to stabilize seasonal walnut price, sale's in advance, credit supply and provision of storage facilities must be considered in policy-making decision for forest farmers.

• Journal of Korean Home Economics Education Association
• /
• v.20 no.3
• /
• pp.85-105
• /
• 2008

The purpose of this study was to develop a narrative analytic scoring rubric through teacher-students negotiations, as an assessment of tasks using methods of experiment and practice for home economic(HE) in the middle school. In this study. an analytic rubric had been developed in the following three stages: In the first stage, all the things for rubric development were defined and prepared, by selecting tasks used for rubric application through a questionnaire survey, providing detailed directions on methods and procedures and needed items, and selecting a class for rubric negotiation and setting the development schedule. In addition, the method suggested by Ainsworth and Christinson(1998) in Student Generated Rubrics was used. In the second stage, performance criteria for tasks in terms of knowledge, skills, and attitude were developed, setting scoring framework and scales depending on assessment areas. Referring to selected scoring framework and assessment criteria, observable and assessable behaviors were used to describe rubric based on A, B, and C scale. Then, a primary rubric was developed through teacher-students negotiations, using rubrics made by group. In the last stage, the developed primary rubric was reviewed by an expert of HE education to test the validity. Moreover, the analysis to test the suitability of the final rubric assessment tool employed 46 copies of questionnaire collected from incumbent home economics teachers selected by way of random sampling mainly focusing on those teachers who were in the Master's degree program or completed the program at one university. As a result, the average of suitability of aa the rubrics were over 4.0 in th 5-point scale.

• Journal of Korean Historical Folklife
• /
• no.45
• /
• pp.263-289
• /
• 2014

King Munjong(文宗), the eleventh King of the Goryeo Dynasty, was the son of King Hyeonjong(顯宗), the eighth king, and the younger stepbrother(異母弟) of King Jeongjong(靖宗), the 10th king. Although King Jeongjong had four sons, he abdicated the throne to King Munjong. King Taejo(太祖) had opened the possibility for sons other than the eldest son to succeed to the throne. When King Jeongjong died, his sons were children under the age of 10 years. In the early period of the Goryeo Dynasty, when kings had young sons, there were precedents of abdicating the throne to their grown-up younger brothers. In addition, King Jeongjong and Munjong had an identical blood background. During the period, Goryeo people also naturally accepted the fact that a former king's younger brother succeeded to the throne. In this background, King Munjong ascended the throne. However, King Munjong did not ascend the throne after identifying state affairs with politic power. Therefore, he needed to increase his authority as the king. Moreover, as the sons of King Jeongjong had grown up, they could stir up trouble in future succession to the throne. Therefore, King Munjong intended to concentrate power on himself and remove trouble in future succession to the throne by selecting his son as successor to the throne. After the installation of Wangtaeja(王太子, the Crown Prince), King Munjong expanded and organized Donggunggwan(東宮官, the establishment of Secretariat of Wangtaeja) and carried out various rituals related to Wangtaeja. The control system for Donggunggwan was completed institutionally in 1068. At this time, the newly organized Donggunggwan was operated as a miniature version of the central government office. In addition, the ritual for the installation of Taeja, which was held in 1054, complied with regulated procedures. After the ritual of the installation, a ceremony to congratulate on Jangheungjeol(長興節, the birthday of Wangtaeja) was held in 1056. In 1064, the wedding ritual of Taeja took place, and the ritual for Taeja regulated in Yeji(禮志) of "Goryeosa(高麗史)" was carried out. In addition, the installation of Wangtaeja was made known overseas, and the Taeja of Goryeo was proclaimed by the Kitan three times. Such various measures played an important role in strengthening the status of Taeja as the man of authority next to the king. Later, Taeja demonstrated his status as the man of authority following the king by participating in state affairs on behalf of King Munjong who was not able to move about freely in his later years.

• Korean Journal of Remote Sensing
• /
• v.26 no.2
• /
• pp.251-262
• /
• 2010

In order to provide quantitative control of the standard products of Geostationary Ocean Color Imager (GOCI), on-board radiometric correction, atmospheric correction, and bio-optical algorithm are obtained continuously by comprehensive and consistent calibration and validation procedures. The calibration/validation for radiometric, atmospheric, and bio-optical data of GOCI uses temperature, salinity, ocean optics, fluorescence, and turbidity data sets from buoy and platform systems, and periodic oceanic environmental data. For calibration and validation of GOCI, we compared radiometric data between in-situ measurement and HyperSAS data installed in the Ieodo ocean research station, and between HyperSAS and SeaWiFS radiance. HyperSAS data were slightly different in in-situ radiance and irradiance, but they did not have spectral shift in absorption bands. Although all radiance bands measured between HyperSAS and SeaWiFS had an average 25% error, the 11% absolute error was relatively lower when atmospheric correction bands were omitted. This error is related to the SeaWiFS standard atmospheric correction process. We have to consider and improve this error rate for calibration and validation of GOCI. A reference target site around Dokdo Island was used for studying calibration and validation of GOCI. In-situ ocean- and bio-optical data were collected during August and October, 2009. Reflectance spectra around Dokdo Island showed optical characteristic of Case-1 Water. Absorption spectra of chlorophyll, suspended matter, and dissolved organic matter also showed their spectral characteristics. MODIS Aqua-derived chlorophyll-a concentration was well correlated with in-situ fluorometer value, which installed in Dokdo buoy. As we strive to solv the problems of radiometric, atmospheric, and bio-optical correction, it is important to be able to progress and improve the future quality of calibration and validation of GOCI.