• The Korean Journal of Nuclear Medicine Technology
• /
• v.13 no.3
• /
• pp.81-85
• /
• 2009

Purpose: The examination of nuclear medicine observes the change in accordance with the time elapsed in the same region purposed and there are many examinations to acquire the image during the same term. At this time, the same parameter should be applied. The hepatobiliary scan, lung scan etc, are the acquired examination in the divided time with a regular term. Pre-set time that is applied in continued next image is set in order to acquire the fixed counts. The same scan time should be applied for each image. This study will look for the rational plan and analyze the change of scan time in accordance with the time of the decision of scan time at examination that pre-set time is applied. Methods: The hapatobiliary scan that use the radio pharmaceutical $^{99m}Tc$-mebrofenin is choosed as compensation from Jan. 2009 to Mar. 2009 in the department of nuclear medicine in ASAN MEDICAL CENTER. Scan is started after 5 minutes from when 222 MBq (6 mCi) is injected to patient. We let patient stand up between both detectors, and possibly close to the front of detector. When scan time reach 10%, 25%, 50%, 75% of total scan time, we measured the expected total scan time. After finishing all of scan, we compared the total scan time and the expected total scan time, while image is acquiring. and we observed the change of scan time in accordance with radio activity by using phantom. Results: After starting scan, a difference of when scan time reach 10%, 25%, 50%, 75% of total scan time is that the biggest difference is 5 seconds on 10%. There statistically is difference between 25% (t:2.88, p<0.01) and 50% (t:2.05, p<0.01). Conclusions: When the same the scan time is applied in the examination that acquire the many frame, concluding the same scan time has a important effect on a quantitative analysis. Although method that decide the scan time after finish all of the examinations, there is a few problem to apply practical affairs. This may cause an inaccurate result on the examination that need a quantitative analysis. We think that operator should try to improve it. At least, after reach 50% of total scan time, deciding the total scan time mean that you can minimize error of a quantitative analysis caused by unmatched scan time from a gap of image.

• Journal of Korean Ophthalmic Optics Society
• /
• v.3 no.1
• /
• pp.249-258
• /
• 1998

This study was researched the state and problem of the soft contact Lens wear by the history and inverted microscopy. The results was as follows; 1. The first use of contact lens wear was the 15 years and the last use was the 26 years. The first age of most contact lens wear was the 19 years. 2. In the almost contact lens wearers, the first visual test was the optical shop. 3. At present, almost soft contact lens purchase the optical shop 4. At present, most contact lens wearer like a soft type. 5. At present, most soft contact lens were a domestic production, and some subjects were foreign country production, but some subjects were unknown. 6. After contact lens wear, most subjects don't known the corrected visual acuity, especially, almost people don't known the binocular visual acuity. 7. At present, on soft contact lens color, the teens like the non-color contact lens, twenties like the color contact lens, but thirties was not known. 8. On the advantage of soft contact lens knowledge, most teens and twenties were only one, thirties was unknown. 9. On the disadvantage of soft contact lens knowledge, most teens and thirties were only one, twenties were two. 10. On the side effect of soft contact lens wearer, teens was one, and twenties and thirties don't known. 11. On the main symptoms of soft contact lens wearer, total kinds were seven, On these kinds, most subjects were not symptoms, the next order was unknown on the symptom. But, On the symptoms, the main symptoms was the pain and dry eye. 12. At present, the research on the surface morphology of soft contact lens by inverted microscope, the lens repture, lens folding, foreign body immersion and etc were present. Above the study, most contact lens was soft lens, and the purchase was the optical shop, on the other hand, the knowledge of soft contact lens and visual acuity was few. As a results, On the practical problems of soft contact lens wear, the optician have to the soft contact lens treatment and aftercare by law and educational supporting.

• Korean Journal of Remote Sensing
• /
• v.30 no.1
• /
• pp.61-73
• /
• 2014

This study reviewed an application of water quality estimation using an Airborne Hyperspectral Imagery (A-HSI) and tested a part of Han River water quality (especially suspended solid) estimation with available in-situ data. The estimation of water quality was processed two methods. One is using observation data as downwelling radiance to water surface and as scattering and reflectance into water body. Other is linear regression analysis with water quality in-situ measurement and upwelling data as at-sensor radiance (or reflectance). Both methods drive meaningful results of RS estimation. However it has more effects on the auxiliary dataset as water quality in-situ measurement and water body scattering measurement. The test processed a part of Han River located Paldang-dam downstream. We applied linear regression analysis with AISA eagle hyperspectral sensor data and water quality measurement in-situ data. The result of linear regression for a meaningful band combination shows $-24.847+0.013L_{560}$ as 560 nm in radiance (L) with 0.985 R-square. To comparison with Multispectral Imagery (MSI) case, we make simulated Landsat TM by spectral resampling. The regression using MSI shows -55.932 + 33.881 (TM1/TM3) as radiance with 0.968 R-square. Suspended Solid (SS) concentration was about 3.75 mg/l at in-situ data and estimated SS concentration by A-HIS was about 3.65 mg/l, and about 5.85mg/l with MSI with same location. It shows overestimation trends case of estimating using MSI. In order to upgrade value for practical use and to estimate more precisely, it needs that minimizing sun glint effect into whole image, constructing elaborate flight plan considering solar altitude angle, and making good pre-processing and calibration system. We found some limitations and restrictions such as precise atmospheric correction, sample count of water quality measurement, retrieve spectral bands into A-HSI, adequate linear regression model selection, and quantitative calibration/validation method through the literature review and test adopted general methods.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.4
• /
• pp.191-203
• /
• 2016

This purpose of this study is to academically define what "luxury products" mean, and to clarify the cognitive structural relationship between corporate attributes and "luxuriousness" in relation to the determinant of luxuriousness that eventually affects the purchase intention of consumers. This study is also written under the theory that luxuriousness leads to benefits such as functional benefit, experiential benefit, symbolic benefit, and exclusive benefit; which all provide core values to consumers and serve as effect factors that influence the psychological satisfaction of consumers. The commonly discussed measure of the determinant of luxuriousness has often failed to adequately describe the reasons to why the consumers prefer luxury products. This study also aims to suggest a new path in how and what the consumers perceive as luxury products, and to conceptualize what luxuriousness means in the marketing perspectives on the background of a previous theory. The part of corporate attributes are divided in the following sections: corporate ability(CA) and corporate reputation(CR). The part of the determinant of luxuriousness is divided in sections of superiority, scarcity, differentiation, and traditionality. Therefore, this study used the theoretical concept used in such common measures as well as 282 examples to empirically analyze the relationship between corporate attributes and luxuriousness of luxury products, and how such affect the purchase intentions of consumers. The survey used to aid this study targeted luxury product consumers regarding "B" brand of automobiles. Using the analysis through a structural equation model, the study draws a conclusion that in a relationship between corporate attributes and luxuriousness, corporate ability(CA) of corporate attributes affects the facts of differentiation and traditionality in a significant way, and corporate reputation(CR) of corporate attributes affects the factors of superiority and scarcity in a significant way. Additionally, the superiority and scarcity of luxuriousness positive significantly affects purchase intention, and differentiation and traditionality of luxuriousness affects purchase intention in a negative significant way. The structural concept of luxury and luxuriousness suggested in the study will provide the theoretical basis for building a new case study, and the determinants of luxuriousness in the marketing perspective will be a practical help for checking the consumers' psychological reasons for purchase.

• Journal of Animal Science and Technology
• /
• v.45 no.4
• /
• pp.593-606
• /
• 2003

This study was conducted to develop effective manufacturing methods of a total mixed ration(TMR) composed of broiler litter(BL) and bakery by-product(BB) for ruminants. Five experiments included a small-scaled manufacture of TMR using a deepstacking method(Exp. 1), its pelletization(Exp. 2), its field-scaled manufacture(Exp. 3), a field-scaled manufacture using an ensiling method(Exp. 4), and a mixing process of deepstacked BL and BB prior to feeding(Exp. 5). BL and BB were mixed at a ratio which makes total digestible nutrients of the TMR 69%. For each experiment, temperature, appearance and physico-chemical properties were recorded and analyzed. The chemical composition data revealed that the mixture of BL and BB showed nutritionally additive balance which resulted from a considerable increase(P<0.05) of organic matter and a desirable decrease(P<0.05) of protein and fiber up to the requirement level for growing ‘Hanwoo’ steers. Deepstacking of BL and BB in Exp. 1 and 3 resulted in a sufficient increase of stack temperature for pasteurization, little chemical losses, appearance of white fungi on the surface, and partial charring due to excess stack temperature. For Exp. 2, its pelleting, which was successful using a simple, small-scaled pelletizer, resulted in a little loss(P<0.05) of organic matter and an increase(P<0.05) of indigestible protein(ADF-CP). Ensiling the mixture in Exp. 4 made little effect on chemical composition; however, one month of the ensiling period was not enough for favorable silage parameters. Deepstacking BL alone in Exp. 5 tended(P<0.1) to decrease true protein : NPN ratio and hemicellulose content and increase ADF-CP content due to the heat damage occurred. Deepstacking or ensiling of BL-BB mixtures and simple incorporating of BB into deepstacked BL prior to feeding could be practical and nutrients-preservative methods in TMR manufacture for beef cattle, although ensiling needed further hygienic evaluation.

• Korean Journal of Environmental Agriculture
• /
• v.29 no.2
• /
• pp.93-101
• /
• 2010

For the study of possibility of practical use as an organic farm materials of the mixtures with lignite and amino acid solution, this experiment was carried out to investigate the effects of the mixtures on the growth and the yield of rice plant, chinese cabbage, and red pepper, and the effects of the mixtures on chemical properties of soil. Also, when the mixtures of the lignite plus amino acid solution and the chemical fertilizer were applied to these three crop cultivation area, authors want to know how can the loss in quantity of chemical fertilizer affects the growth and the yield of these crops. As the results, growth of rice plant applied with the mixtures of lignite and amino acid solution was better than that applied with the recommended rate of chemical fertilizer. Especially, the growth of rice plant appeared to be good at the treatment of 150 kg/ha of the mixed lignite with amino acid solution and at that of its mixtures and standard fertilization. Growth of chinese cabbage and red pepper was good at the application of 600 kg/ha of the mixed lignite with amino acid solution and at that of its mixtures and standard fertilization. Yield of rice and chinese cabbage was good at the treatment of 150 kg/ha of the mixed lignite with amino acid solution and at that of its mixtures and standard fertilization, and yield of red pepper was good at the application of 600 kg/ha of the mixed lignite with amino acid solution and at that of its mixtures and standard fertilization. The organic matter content increased and while the exchangeable cation decreased when the lignite mixed with amino acid solution and the loss in quantity of chemical fertilizer applied at paddy field. Incase of these treatments, pH and available phosphorus increase at upland field, but did not change at paddy field.

• The Journal of Engineering Geology
• /
• v.27 no.4
• /
• pp.405-416
• /
• 2017

This study evaluated a model unconfined aquifer comprising a sand or gravel layer, a filter layer, a pumping well, and an observation well. The model was employed in step drawdown tests and then used to assess the permeability of each test tank. The optimal yield and well efficiency were then calculated. Evaluation of yield by step in sand layer filters of equal thickness gave optimized watering rates of 22.03 L/min in the double filter and 19.71 L/min in the single filter. The double filter's yield was 115.0% that of the single filter. A comparison of double and single filters, each 10 cm thick, showed the double filter to have a maximum yield of 182.7%. Yields for the gravel layer were 73.56 L/min for a double filter and 65.47 L/min for a single filter of the same thickness; the former value is 112.3% of that of the latter. Comparison of double and single filters with 10-cm-thick gravel layers revealed that the double filter had a maximum yield of 160.9%. Results for sand wells showed the double filter to have a maximum efficiency of 70.4% and the single filter to have a minimum efficiency of 37.1%. Gravel-layer well efficiencies were >66.5% for both double and single filters (each 30 cm thick), but only 22.5% for a 10-cm-thick single filter. This study confirms that permeability improved as the filter material became thicker; it also shows that a double filter has a higher yield and well efficiency than a single filter. These results can be applied to the practical design of wells.

• The Journal of the Korea Contents Association
• /
• v.20 no.8
• /
• pp.583-597
• /
• 2020

This study analyzed how elderly people's perception of social welfare affects social welfare service and social welfare policy satisfaction by paying attention to the use of social welfare services and satisfaction with social welfare policies. In order to achieve this research goal, 465 people aged 60 or older who completed responses to the additional survey were collected and analyzed as research targets based on data from the Korea Welfare Panel, which is accumulated by the Korea Institute for Health and Social Affairs and Seoul National University's Social Welfare Research Institute. The results of this study are as follows. First, "Awareness of welfare for the elderly (recognition of welfare expenditure, recognition of welfare targets, recognition of welfare tax increases)" was found to have a negative impact on "use of social services." Second, "Awareness of welfare for the elderly (recognition of welfare expenditure, recognition of welfare targets, recognition of welfare tax increases)" was found to have a negative impact on "satisfaction with social welfare policies." Third, the impact of the recognition of welfare for the elderly on the use of social services was found to be different according to the demographic characteristics (education level, income level, educational background, gender). Fourth, according to the "population statistical characteristics (education level, income level, educational background, gender)" the impact of the recognition of welfare for the elderly on the satisfaction of social welfare policy was shown to be different. The implications of this study are that we looked at multi-dimensional welfare awareness and social service use experience together as factors affecting social welfare policy satisfaction. In other words, it is meaningful that the government focused on welfare awareness based on individual values and subjective perceptions as an influence on social welfare policy satisfaction, and sought practical alternatives to welfare policies and welfare sites by examining whether the experience of using social services in relation to welfare awareness and social welfare policy satisfaction among the elderly.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.1
• /
• pp.23-30
• /
• 2007

The ultimate objective of this study is to develop oxygen-enriched combustion techniques applicable to the system of practical industrial boiler. To this end the combustion characteristics of lab-scale LNG combustor were investigated as a first step using the method of numerical simulation by analyzing the flame characteristics and pollutant emission behaviour as a function of oxygen enrichment level. Several useful conclusions could be drawn based on this study. First of all, the increase of oxygen enrichment level instead of air caused long and thin flame called laminar flame feature. This was in good agreement with experimental results appeared in open literature and explained by the effect of the decrease of turbulent mixing due to the decrease of absolute amount of oxidizer flow rate by the absence of the nitrogen species. Further, as expected, oxygen enrichment increased the flame temperatures to a significant level together with concentrations of $CO_2$ and $H_2O$ species because of the elimination of the heat sink and dilution effects by the presence of $N_2$ inert gas. However, the increased flame temperature with $O_2$ enriched air showed the high possibility of the generation of thermal $NO_x$ if nitrogen species were present. In order to remedy the problem caused by the oxygen-enriched combustion, the appropriate amount of recirculation $CO_2$ gas was desirable to enhance the turbulent mixing and thereby flame stability and further optimum determination of operational conditions were necessary. For example, the adjustment of burner with swirl angle of $30\sim45^{\circ}$ increased the combustion efficiency of LNG fuel and simultaneously dropped the $NO_x$ formation.

• Journal of Korea Technology Innovation Society
• /
• v.20 no.3
• /
• pp.607-641
• /
• 2017

Recently, there has been an increase in government-wide demand for technological cooperation between government funded research institutes (GFRIs) and small and medium-sized enterprises (SMEs), while there remain a tension between positive and negative views regarding the support given by GFRIs to encourage the technological innovation of SMEs. Although preceding studies have found that the support given by GFRIs to SMEs tends to have the effect of enhancing the technological innovation outcomes of SMEs, this study examines the question of why the agent that provides technological cooperation to SMEs should be limited to GFRIs. To answer this question, in this study, we first examined the qualitative changes in the external technological cooperation behavior of SMEs over time, from 2007 to 2014. Next, we performed cluster analysis to examine whether there were distinctive characteristics of SMEs that engage in technological cooperation with GFRIs, compared to the various other alternatives available as technological cooperation partners for SMEs. Lastly, to help us identify the characteristics of the companies that technologically cooperate with GFRIs and to facilitate the administrative or practical effort to find companies that would be strong candidates for technological cooperation with GFRIs, we used discriminant analysis to define a discriminant formula for such companies likely to engage in technological cooperation. The results of this study were as follows. First, GFRIs were the most competitive -- as demonstrated by the highest level of satisfaction, etc. - compared to the other alternatives for external technological cooperation available to SMEs. This confirmed the necessity for GFRIs to provide technological cooperation to SMEs. Secondly, the issue of whether the small and medium-sized enterprise had engaged in technological cooperation specifically with GFRIs was found not to be a very significant factor in distinguishing these companies. It was found, however, that SMEs engaged in technological cooperation were distinctive, regardless of the type of institution involved in the technological cooperation. Thirdly, SMEs that were in technological cooperation with GFRIs had the characteristics of being already active in joint research and already familiar with utilizing the systems available for governmental support. The findings of this study offers various insights relevant to establishing national R&D strategies using GFRIs and improving the efficiency of policies and administrative practices intended to help GFRIs assist SMEs.