• 대한수학회보
• /
• 제46권6호
• /
• pp.1151-1152
• /
• 2009

In this short notice, we prove a new result about the dth power residue symbol of function fields, by modifying the method of W. Kohnen in the paper published in Bull. Korean Math. Soc. 45 (2008), no. 2, 273-275.

• 한국식품조리과학회지
• /
• 제22권5호통권95호
• /
• pp.583-590
• /
• 2006

This study was carried out to investigate the acceptable ratio of Sulgidduk with added soybean curd residue powder. The moisture content of Sulgidduk with added soybean curd residue powder (0${\sim}$ 10%) ranged from 40.54 ${\sim}$41.38%, and there were no significant differences between the addition of soybean curd residue powder and control. There were also no significant differences in swelling power and pore ratio from control to the addition of 4% soybean curd residue powder. However, these decreased with increasing addition of soybean curd residue powder of more than 6%. The L (lightness) value decreased with increasing addition of soybean curd residue powder, but the a (redness) and b (yellowness) values increased significantly. As the amount of soybean curd residue powder increased, the hardness, cohesiveness, springiness and gumminess decreased, and, the decrease was especially significant with addition of more than 6%. With increases in the storage period, the hardness, springiness and gumminess increased, while cohesiveness decreased for all additions of soybean curd residue powder. In sensory evaluations, Sulgidduk with the addition of 4% soybean curd residue powder was the most preferred with regard to overall quality. These results indicated that the Sulgidduk with 2% and 4% added soybean curd residue powder exhibited the best quality.

• 한국통신학회논문지
• /
• 제31권4C호
• /
• pp.318-323
• /
• 2006

본 논문에서는 주파수 도약 시스템에 사용될 짧은 길이의 도약 수열의 생성법 세가지를 제안한다. 우선, 기존에 알려져 있는 한개 일치수열과 다상 멱 잉여류 수열의 생성법에 대해 설명하고, 한개 일치수열의 변형으로 얻어진 생성법 하나와 다상 멱 잉여류 수열을 이용한 방법 두개를 제안한다. 다상 멱 잉여류 수열에서 '최적 지움위치'를 지운 수열이 제안된 세가지 수열들 중에서 가장 좋은 상관특성을 가지고, 그 다음은 첫번째 위치 지운 수열, 한개 일치 수열의 변형 수열 순으로 상관특성이 좋음을 확인한다. 또한 이들 세 수열이 심볼이 균형성이 우수하고 쉽게 구현될 수 있음을 설명한다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
• /
• pp.207-214
• /
• 2004

Extra heavy vacuum residue oil has advantage as the fuel of a power plant in reducing the cost of power generation. Numerical study is conducted by the KIVA code to understand combustion, heat transfer and flow field characteristics in the test reactor. The combustion model of pulverized coal particles is adopted as the combustion process of extra heavy oil is similar to that of coal. As an initial phase of investigation parametric study is performed with respect to SMD and spray angle of injected spray droplets.

• 에너지공학
• /
• 제14권4호
• /
• pp.268-276
• /
• 2005

액체연료(중유)공급량 기준 20kg/hr규모의 반응로에서 증기분무 내부 혼합식 노즐을 이용하여 잔사유의 연소실험을 수행하였다. 본 실험에서 사용한 감압 잔사유는 점도가 높고 황함량, 잔류탄소와 금속성분의 함량도 높았다. 잔사유의 착화를 위해서는 반응로를 일정온도까지 예열하여야 했으며 이는 LPG를 이용하였다. 잔사유 공급량을 변화시키면서 축방향 및 반경방향의 로내 가스 온도, 주요 가스농도 및 채집된 고체 입자를 분석하였다. 잔사유의 주반응영역은 버너 팁으로부터 약 1 m 근방에서 형성되었으며 이는 축방향 가스 온도, 농도 분포 및 입자의 크기로부터 확인할 수 있었고, 반응로의 하류에서는 완전 확립된 온도분포를 보여주고 있었다. 고체 입자의 SEM 분석으로부터 잔류 탄소입자는 기공이 많은 형태를 띠고 있었다.

• Environmental Engineering Research
• /
• 제12권3호
• /
• pp.109-117
• /
• 2007

The characteristics of carbonaceous particles collected from the combustion of Vacuum Residue (VR) in a test furnace have been investigated. The physical and chemical characterization includes particle size, scanning electron microscopy of the surface structure, measurement of porosity, surface area and density, EDX/XRD analyses and measurement of chemical composition. The studies show that the carbonaceous VR particles are very porous and spheroidal, and have many blow-holes on the surface. The particles become smaller and more sponge-like as the reaction proceeds. The present porosity of VR particles is similar to that of cenospheres from the combustion of heavy oil, and the majority of pores are distributed in macro-pores above $0.03\;{\mu}m$ in diameter. Measurements of pore distribution and surface area showed that the macro-pores contributed most to total pore volume, whereas the micro-pores contributed to total surface area.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 하계학술대회 논문집
• /
• pp.88-89
• /
• 2009

In this paper, we investigated about wet cleaning effect as deep trench formation methods for Power chip devices. Deep trench structure was classified by two methods, PSU (Poly Stick Up) and Non-PSU structure. In this paper, we could remove residue defect during wet. cleaning after deep trench etch process for non-PSU structure device as to change wet cleaning process condition. V-SEM result showed void image at the trench bottom site due to residue defect and residue component was oxide by EDS analysis. In order to find the reason of happening residue defect, we experimented about various process conditions. So, defect source was that oxide film was re-deposited at trench bottom by changed to hydrophobic property at substrate during hard mask removal process. Therefore, in order to removal residue defect, we added in-situ SCI during hard mask removal process, and defect was removed perfectly. And WLR (Wafer Level Reliability) test result was no difference between normal and optimized process condition.

• International Journal of Advanced Culture Technology
• /
• 제4권1호
• /
• pp.1-9
• /
• 2016

The demand for energy in Thailand has been continually increasing as the economic and social country grows. Approximately 60% of Thailand's primary energy is imported, mostly petroleum products. In 2008 Thailand's total energy consumption was 80,971 ktoe and the net price of energy imported was up to 1,161 billion Baht which is equivalent to 12.8% of GDP at the current price. The energy consumption or energy demand has been growing at an annual compounded growth rate of 6.42% and the peak electric power demand and electricity consumption was recorded at 22,568 MW and 148,264 GWh and grew at a rate of 7.0% and 7.5% per annum during the period from 1989 to 2008. The gross agriculture production in 2008 was recorded at 135.4 Mt which represents agriculture residue for energy at 65.73 Mt, which is equivalent to energy potential of about 561.64 PJ or 13,292 ktoe an increase in average of 5.59% and 5.44% per year respectively. The agricultural residues can converted to 15,600 GWh/year or 1,780 MW of power capacity. So, if government sector plan to install small biomass gasification for electricity generation 200 kW for Community. The residue agricultural is available for 8,900 plants nationwide. The small biomass power generation for electricity generation not only to reduce the energy imports, it also makes the job and income for people in rural areas as well. This paper's aim is to report the energy situation in Thailand and has studied 5 main agricultural products with high residue energy potential namely sugarcane, paddy, oil palm, cassava, and maize appropriate for small electricity production. These agricultural products can be found planted in many rural areas throughout Thailand. Finally, discuss the situation, methods and policies which the government uses to promote small private power producers supplying electricity into the grid.

• 한국전자파학회논문지
• /
• 제16권4호
• /
• pp.373-379
• /
• 2005

Schroeder 방식의 1 Dimension QRD(quadratic Residue Diffuser)를 사용하여 잔향실 내부에서의 필드 균일성이 향상됨을 밝힌 연구는 이미 수 차례 발표된 바 있다. 본 연구에서는 $2.3\;\cal{GHz}\~3\;\cal{GHz}$대역에서, 전자파 잔향실의 전자기장 특성 및 필드의 균일도 향상을 위해 잔향실 내에 Schroeder 방식의 CRD(Cubical Residue Diffuser)가 설계 및 적용되었고 필드 분포 해석을 위해 FDTD(Finite-Difffrence Time-Domain) 방법의 수치해석이 이루어졌다. 잔향실 내부의 확산기는 cubical residue algorithm과 2D 배열을 사용함으로써 더욱더 random한 형태를 이루었으며 결과적으로 CRD를 사용함으로써 잔향실 내에서의 편파 특성, 표준 편차 및 tolerance 등의 성능이 좋아지는 것을 확인하였다. 또한 2D CRD의 경우, 전력 효율도 높아짐을 알 수 있었다.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권7호
• /
• pp.265-272
• /
• 2006

This paper describes a method of parameter estimation of time series data using discrete Fourier transform(DFT). DFT have been mainly used to precisely and rapidly obtain the frequency of a signal. In a dynamic system, a real part of a mode used to learn damping characteristics is a more important factor than the frequency of the mode. The parameter estimation method of this paper can directly estimate modes and parameters, indicating the characteristics of a dynamic system, on the basis of the Fourier transform of the time series data. Real part of a mode estimates by subtracting a frequency of the Fourier spectrum corresponding to 0.707 of a magnitude of the peak spectrum from a peak frequency, or subtracting a frequency of the power spectrum corresponding to 0.5 of the peak power spectrum from a peak frequency, or comparing the Fourier(power) spectrum ratio. Also, the residue and phase of time signal calculate by simple equation with the real part of the mode and the power spectrum that have been calculated. Accordingly, the proposed algorithm is advantageous in that it can estimate parameters of the system through a single DFT without repeatedly calculating a DFT, thus shortening the time required to estimate the parameters.