• Journal of the Korean association of regional geographers
• /
• v.17 no.5
• /
• pp.568-581
• /
• 2011

Having gone through the international financial crisis in 1997, the Korean government has sought a new future economic breakthrough. In this line, the government chose the cultural contents business and has supported this area intensively. With the cultural contents promotion policy initiated to foster the world-class culture business based on the traditional Korean culture, Andong, which has diverse cultural traditions, was rediscovered. The Andong local government and the local power elites decided that this promotion policy can not only be an opportunity to invigorate the sluggish local economy, but also help eliminate the old-fashioned image of Andong, and thus actively promoted the cultural contents business. However, there's a conflict among the local elites over which cultural tradition should be chosen as a genuine local cultural tradition. The different views and efforts regarding the cultural identity of the region by each entity not only contributed significantly to the recovery of the local economy by revitalizing tourism, but also helped the region gain an advantageous position in competition with other regions over limited resources. This progress became the groundwork for attracting major institutions and facilities, which are essential for the revitalization of the local economy.

• Journal of Astronomy and Space Sciences
• /
• v.19 no.4
• /
• pp.273-282
• /
• 2002

We describe some performance of the detector electronics system for the FIMS (Far-ultraviolet Imaging Spectrograph) mission. The FIMS mission to map the far ultraviolet sky uses MCP (micro-channel plate) detectors with a crossed delay line anode to record photon arrival events. FIMS has two MCP detectors, each with a ~25mm$\times$25mm active area. The unconventional anode design allows for the use of a single set of position encoding electronics for both detector fields. The centroid position of the charge cloud, generated by the photon-stimulated MCP, is determined by measuring the arrival times at both ends of the anode following amplification and external delay. The temporal response of the detector electronics system determines the readout's positional resolution for the charge centroid. High temporal resolution (<$35{\times}75$ps FWHM) and low power consumption (< 6W) were achieved for the FIMS detector electronics system.

• Asia pacific journal of information systems
• /
• v.23 no.4
• /
• pp.29-51
• /
• 2013

In line with network technology development and smart device penetration, the social network service (SNS) has expanded its influence. The SNS which is a service based on communication and sharing among people, has grown based on users' voluntary engagement and participation and its influence has appeared beyond the cyberspace into the overall areas of domestic and foreign culture and society. In particular, SNS-based real-time communication during diverse disasters, can help prevent further damage. By sharing information on social donation activities and environmental campaigns, people have used SNS as a tool to change the society in a more positive way. Such series of activities functioning as a power to change the society have been made much faster and wider through the help of a new media called SNS. To better understand such trends, we are required to study about the SNS and its user relationships first. In this context, this study sought to identify the effects of people's desire to build friendships through SNS on the voluntary and society-friendly activities of people. This study considers online pro-social behavior and proposes online citizenship behavior. Citizenship behavior has been examined in organization context. That is, organizational citizenship behavior explains an employee's pro-social behavior in an organization context. Organizational citizenship behavior is characterized by the individual's helping others and promoting the functioning of the organization. By applying organizational citizenship behavior to an online context, we propose online citizenship behavior, an individual's pro-social behavior in an online context. An individual's pro-social behavior, i.e., online citizenship behavior, could be considered as a way for the better management of online community and society. It also needs to examine the development of online citizenship behavior. This study examined online citizenship behavior from the friendship desire. Because online society or community is characterized by online relationships between members, the friendship between members would lead to pro-social behavior, i.e., helping others and promoting the functioning of the online society, in such online context. This study further examines the antecedents of friendship desire in terms of SNS interactivity with its four factors. The findings based on the survey from real SNS users explain that the three factors of SNS interactivity (connectivity, enjoyment, and synchronicity) increases online friendship desire which then increases online citizenship behavior significantly. This study contributes to the literature by examining the key role of online friendship desire in leading to online citizenship behavior and identifying its antecedents in terms of SNS characteristics. The findings in this study also provide guidance on how to manage online society and how to promote the effective functioning of SNS.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.2
• /
• pp.147-153
• /
• 2016

The lightning protection of information and communication facilities is very important factor to improve a reliability of the action of these equipment. Especially the transient potential rise of ground electrode being injected with the lightning current is to be a basic data of the dielectric strength for both power and communication facilities so that more accurate analysis should be required. The transient potential rise can be calculated from the ground impedance and the ground impedance is strongly dependent upon the shape of the ground electrode and the frequency-dependence of soil. The Debye's equation which is able to calculate the characteristics of dielectrics is used to analyze the frequency-dependent of soil. Also, the method to calculate the transient potential rise from the ground impedance is specified in this paper. In order to analyze the transient potential rise resulting from calculations with Debye's equation, TLM(transmission line method) and case of ${\rho}$(resistivity)-constant are simulated, respectively. The length of a horizontal ground electrode is 30 m and simulations were performed at 10, 100, $1000{\Omega}{\cdot}m$ with the standard lightning current waveform. In result, the transient potential rise of horizontal ground electrode calculating with Debye's equation is lower than it of other models.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.5
• /
• pp.879-886
• /
• 2008

This paper addresses the analysis and the design optimization of differential interconnects for Low-Voltage Differential Signaling (LVDS) applications. Thanks to the differential transmission and the low voltage swing, LVDS offers high data rates and improved noise immunity with significantly reduced power consumption in data communications, high-resolution display, and flat panel display. We present an improved model and new equations to reduce impedance mismatch and signal degradation in cascaded interconnects using optimization of interconnect design parameters such as trace width, trace height and trace space in differential flexible printed circuit board (FPCB) transmission lines. We have carried out frequency-domain full-wave electromagnetic simulations, time-domain transient simulations, and S-parameter simulations to evaluate the high-frequency characteristics of the differential FPCB interconnects. The 10% change in trace width produced change of approximately 6% and 5.6% in differential impedance for trace thickness of $17.5{\mu}m$ and $35{\mu}m$, respectively. The change in the trace space showed a little change. We believe that the proposed approach is very helpful to optimize high-speed differential FPCB interconnects for LVDS applications.

• Korean Journal of Breeding Science
• /
• v.43 no.6
• /
• pp.538-542
• /
• 2011

A new malting barley variety, 'Baegho', was developed from a cross between Azuma Golden and Nishinochikara in 1998. An elite line, YMB2139-2B-1-10-2, was selected in 2005 and designated as Milyang137. It showed good agronomic performance in the regional adaptation yield trials (RYT) from 2006 to 2008 and was released with the name of 'Baegho' having high yielding and BaYMV and powdery mildew resistance. The average heading and maturing dates of 'Baegho' were April 21 and May 28, which were 3 and 2 day later than those of Hopum, check variety, at the RYT, respectively. 'Baegho' has shoter culm length (78 cm), more spikes ($1,062per\;m^2$) and heavier 1,000 grain weight (40.7 g) than those of Hopum, respectively. 'Baegho' is resistant to domestic BaYMV strains I, III and IV and powdery mildew at Iksan. In growth habit, 'Baegho' is close to type (IV) that is distinguished from other Korean malting barley cultivars, which could tolerant to premature heading damage that is major concern for the practice of the malting barley cropping. The yield potential of 'Baegho' in the RYT was about 5.57 MT/ha, which is about 13% higher than those of Hopum. This variety has good malting quality in grain and malting analysis showed better 1,000 grain weight, husk rate, diastatic power than those of Hopum. 'Baegho' applied for protection of new varieties of plant in 2009.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.19 no.3
• /
• pp.44-53
• /
• 2011

Siloxane, organo-silicon compound, is used in the various forms of products such as cosmetics and detergents due to its quality physical chemistry attributes. Siloxane included in landfill gas which is caused in the process of decomposing of such products after landfill has imposed negative impacts on the operation of landfill gas utility facilities. The objective of this study was to investigate the siloxane production characteristics depending on the features of various landfill site in Korea so that the analysis was made on the landfilling age and landfill waste by in terms of its concentration, structure and composition. As for the concentration of siloxane depending on time passage, 12 landfill sites were reviewed by landfilling age. As for production attributes change of siloxane by landfill wastes, the source of wastes, physical production ration and siloxane concentration were compared in 6 landfills. The average concentration of total-siloxane within LFG is $6.75mg/m^3$ and cyclic-siloxane out of it occupies over 93%. By element, D4 and D5 in order take the highest proportion regardless of total-siloxane concentration and landfilling age. Even though this study is not able to verify the different impact of each kind of wastes on the generation of siloxane, it is confirmed that total-siloxane and cyclic-siloxane decrease in line with the increase of landfilling age as it does in the first order decay model for landfill gas.

• The Journal of Korean Institute of Information Technology
• /
• v.15 no.12
• /
• pp.157-164
• /
• 2017

Mobile ECG signal measurement is a technique to measure small signals of several mV, and many studies have been conducted to remove noise including wandering scheme. Removal of the equipotential line noise caused by shaking or movement of the electrode cable is one of the core research contents for the electrocardiogram measurement. In this study, we proposed a modified step-size of combined NLMS(normalized least squares) and DLMS(delayed least squares) adaptive filter to eliminate baseline noise from ECG signals. The proposed method mainly adjusts initial filter step-size to reduce distortion of original ECG signals characteristic after eliminating baseline noise. The modified filter step-size is scaled by filter order size and distortion minimization factor. This method is suitable for portable ECG device with a small processor and less power consumption. This technique also decreases computation time which is essential for real-time filtering. The proposed filter also increase the signal to noise ratio (SNR) compared to conventional NLMS filter.

• Journal of Advanced Navigation Technology
• /
• v.25 no.5
• /
• pp.397-402
• /
• 2021

The real-name electric fishing gear system is one of the important policy capable to build 'abundant fishing ground' and to protect marine environment. And, fishing gear automatic-identification system is one of IoT services that can implement above-mentioned policy by using communication such as low power wide area (LPWA) and multi-sensing techniques. Fishing gear automatic -identification system can gather the location data and lost/hold data from electric buoy floated in sea and can provide them to fishermen and monitoring center in land. We have developed the communication modules and electric buoy consisted of fishing gear automatic-identification system. In this paper, we report the test results of communication distance between electric buoy and wireless node installed in fish boat and location error of electric buoy. It is confirmed that line of sight (LOS) distance between electric buoy and wireless node is obtained to be 62 km, which is two times of the desired value, and location error is obtained to be CEP 1 m, which is smaller than the desired value of CEP 5 m. Therefore, it is expected that service area and accuracy of the developed fishing gear automatic-identification system is more extended.

• Nuclear Engineering and Technology
• /
• v.53 no.8
• /
• pp.2534-2546
• /
• 2021

Nuclear emergency preparedness and response is an essential part to ensure the safety of nuclear power plant (NPP). Key support technologies of nuclear emergency decision-making usually consist of accident diagnosis, source term estimation, accident consequence assessment, and protective action recommendation. Source term estimation is almost the most difficult part among them. For example, bad communication, incomplete information, as well as complicated accident scenario make it hard to determine the reactor status and estimate the source term timely in the Fukushima accident. Subsequently, it leads to the hard decision on how to take appropriate emergency response actions. Hence, this paper aims to develop a method for rapid source term estimation to support nuclear emergency decision making in pressurized water reactor NPP. The method aims to make our knowledge on NPP provide better support nuclear emergency. Firstly, this paper studies how to build a Bayesian network model for the NPP based on professional knowledge and engineering knowledge. This paper presents a method transforming the PRA model (event trees and fault trees) into a corresponding Bayesian network model. To solve the problem that some physical phenomena which are modeled as pivotal events in level 2 PRA, cannot find sensors associated directly with their occurrence, a weighted assignment approach based on expert assessment is proposed in this paper. Secondly, the monitoring data of NPP are provided to the Bayesian network model, the real-time status of pivotal events and initiating events can be determined based on the junction tree algorithm. Thirdly, since PRA knowledge can link the accident sequences to the possible release categories, the proposed method is capable to find the most likely release category for the candidate accidents scenarios, namely the source term. The probabilities of possible accident sequences and the source term are calculated. Finally, the prototype software is checked against several sets of accident scenario data which are generated by the simulator of AP1000-NPP, including large loss of coolant accident, loss of main feedwater, main steam line break, and steam generator tube rupture. The results show that the proposed method for rapid source term estimation under nuclear emergency decision making is promising.