• Journal of Environmental Health Sciences
• /
• v.21 no.3
• /
• pp.38-47
• /
• 1995

The Bioconcentration factor (BCF) is used as an important criterion in the risk assessment of environmental contaminants. Also it can be used as indicator of biomagnification of environmentally hazardous chemicals through food-chain as well as a tool for ranking the bioconcentration potential of the chemicals in the environment. This paper reports the measured BCF value on Chlorothalonil in Carassius auratus(goldfish), under steady state, and examined correlation between the BCF value and the partition coefficient or acute toxicity or physicochemical properties. Carassius auratus(goldfish) was chosen as test organism and test period were 3-day, 5-day. Experimental concentrations were 0.005, 0.01 and 0.05 ppm. Chlorothalonil in fish tissue and in test water were extracted with n-hexane and acetonitrile. GC-ECD was used to detecting and quantitating of Chlorothalonil. Partition coefficient was determined by stir-flask method. $LC_{50}$ was determined on Chlorothalonil. Carbaryl and BPMC. The obtained results were as follows. 1. It was possible to determine short term BCFs of Chlorothalonil through relatively simple procedure in environmental concentrations. 2. $BF_3$ of Chlorothalonil in concentration of 0.005, 0.01 and 0.05 ppm were 2.1866$\pm$0.23446, 3.5269$\pm$0.23517, 10.2045$\pm$0.18053 and BCFs were 6.6543$\pm$0.55257, 6.9774$\pm$0.02500, 23.4576$\pm$2.06884, respectively. 3. Chlorothalonil concentration in fish extract and BCFs of Chlorothalonil were increased as increasing test concentration and prolonging test period. 4. Fate of test-water concentration on Chlorothalonil was greater than that of control-water con-centration. It is considered that greater fate of test-water concentration on Chlorothalonil is due to hydrolyzing nitrile group under the mild condition and substituting chloro group by some aromatic compounds in test water. 5. Determined logP of Chlorothalonil was 2.80. And determined $LC_{50}$ of Chlorothalonil in time of 24, 48, 72 and 96 hr were 0.1684, 0.1402, 0.1400, 0.1352(mg/l) respectively. And $LC_{50}$ of Carbaryl in above times were 19.918, 18.635, 18.466, 18.12(mg/l) respectively. $LC_{50}$ of BPMC were 10.248, 9.166, 9.087, 8.921(mg/l) respectively. 6. It is suggested that the BCF of Carbamates depend on partition coefficients. But BCF of Chlorothalonil, organochlorine pesticide, would be strongly influenced by steric, electronic effect of substituents than partition coefficient.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.8 no.2
• /
• pp.49-59
• /
• 2002

The main function of plastic materials in food packaging is to preserve a food for safe transportation and storage. The interactions between food and plastic materials in food packaging have become increasingly important for food quality and safety because monomer, low molecular weight components, or additives of plastic packaging materials can migrate into a food. The use of antioxidants in plastic materials can help protect the degradation of film itself and retard the oxidation of a packaged food containing lipid, through the migration of antioxidant from the packaging to a product via an evaporation / sorption mechanism. Nowadays, antioxidant (BHT) impregnated plastic materials are used for commercial food packaging application with the intention of achieving an extended shelf life of food in USA. Alpha tocopherol, as one of the most important free radical scavengers, has been well known in biological systems. Moreover, the potential use of alpha tocopherol as an additive for polymers used in the packaging industry may offer the most positive perception from both consumers and manufacturers. Alpha tocopherol has been used as an antioxidant for polyolefin resins fabricated to both bottles and film and has applications in the food packaging industry as a replacement for BHT. Today, alpha tocopherol offers an attractive choice for use as an antioxidant in polymers. This paper provides an overview of antioxidant effectiveness and applications for its use by the food packaging industry based on the evaporation-sorption mechanism of a packaging model product, where quality is associated with lipid oxidation. Important analytical techniques for predicting antioxidant interaction between the package system and product are discussed.

• Safety and Health at Work
• /
• v.4 no.1
• /
• pp.52-62
• /
• 2013

Objectives: To investigate the association between psychological distress and obesity among law enforcement officers (LEOs) in the United States. Methods: Self-reported data on psychological distress based on six key questions were obtained from LEOs who participated in the National Health Interview Survey (2004-2010). We used Prochaska's cut-point of a Kessler 6 score ${\geq}5$ for moderate/high mental distress in our analysis. Mean levels of body mass index (BMI) were compared across three levels of psychological distress. Results: The average age of LEOs (n = 929) was 39.3 years; 25% were female. Overall, 8.1% of LEOs had moderate or high psychological distress; 37.5% were obese (BMI ${\geq}30$). Mean BMI increased with increasing psychological distress (no distress, BMI = $27.2kg/m^2$; mild distress, $27.6kg/m^2$; and moderate/high distress, $33.1kg/m^2$; p = 0.016) after adjustment for age, race, income, and education level among female officers only. Physical activity modified the association between psychological distress and BMI but only among male LEOs (interaction p = 0.002). Among male LEOs reporting low physical activity, psychological distress was positively associated with BMI ($30.3kg/m^2$ for no distress, 30.7 for mild distress, 31.8 for moderate/high distress; p = 0.179) after adjustment, but not significantly. This association was not significant among males reporting high physical activity. Conclusion: Mean BMI significantly increased as psychological distress increased among female LEOs. A longitudinal study design may reveal the directionality of this association as well as the potential role that physical activity might play in this association.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.89.1-89.1
• /
• 2010

Since Gratzel and co-workers developed a new type of solar cell based on the nanocrystalline $TiO_2$ electrode, dye-sensitized solar cells (DSSCs) have attracted considerable attention on account of their high solar energy-to-conversion efficiencies (11%), their easy manufacturing process with low cost production compared to conventional p-n junction solar cells. The mechanism of DSSC is based on the injection of electrons from the photoexcited dye into the conduction band of nanocrystalline $TiO_2$. The oxidized dye is reduced by the hole injection process from either the hole counter or electrolyte. Thus, the electronic structures, such as HOMO, LUMO, and HOMO-LUMO gap, of dye molecule in DSSC are deeply related to the electron transfer by photoexcitation and redox potential. To date, high performance and good stability of DSSC based on Ru-dyes as a photosensitizer had been widely addressed in the literatures. DSSC with Ru-bipyridyl complexes (N3 and N719), and the black ruthenium dye have achieved power conversion efficiencies up to 11.2% and 10.4%, respectively. However, the Ru-dyes are facing the problem of manufacturing costs and environmental issues. In order to obtain even cheaper photosensitizers for DSSC, metal-free organic photosensitizers are strongly desired. Metal-free organic dyes offer superior molar extinction coefficients, low cost, and a diversity of molecular structures, compared to conventional Ru-dyes. Recently, novel photosensitizers such as coumarin, merocyanine, cyanine, indoline, hemicyanine, triphenylamine, dialkylaniline, bis(dimethylfluorenyl)-aminophenyl, phenothiazine, tetrahydroquinoline, and carbazole based dyes have achieved solar-to-electrical power conversion efficiencies up to 5-9%. On the other hand, organic dye molecules have large ${\pi}$-conjugated planner structures which would bring out strong molecular stacking in their solid-state and poor solubility in their media. It was well known that the molecular stacking of organic dyes could reduce the electron transfer pathway in opto-electronic devices, significantly. In this paper, we have studied on synthesis and characterization of dendritic organic dyes with different number of electron acceptor/anchoring moieties in the end of dendrimer. The photovoltaic performances and the incident photon-to-current (IPCE) of these dyes were measured to evaluate the effects of the dendritic strucuture on the open-circuit voltage and the short-circuit current.

• Journal of Korea Technology Innovation Society
• /
• v.16 no.3
• /
• pp.559-581
• /
• 2013

Over the last several decades, the service sector has experienced the rapid growth and will continue to grow in importance, stature and job creation potential. Productivity and innovation activities in the service sector have come under the spotlight as an important element of national economic development. Despite the spotlight, however, not many studies have conducted to investigate the characteristics of innovation activities in the service sector, compared to the rich literature on the innovation in the manufacturing sector. One of the distinguishing features of service innovation is that innovation activities differ markedly across services. Therefore, this research purposes to investigate the characteristics of service innovation focusing on the differences across service types. Here, we restrict our focus to technical innovation such as product and process innovation. For the purpose of investigation, firstly, the KIS (Korea Innovation Survey) dataset in the service sector was adopted, which includes information about patterns of innovation in the Korean firms that provide service offerings. Then, service typology was developed by two criteria - customize-based and facility-based - on the assumption that the characteristics of service innovation activities will vary according the these two criteria; the classifies services into four groups the patterns of innovation activities were analyzed with respect to innovation inputs, process, and outputs. The research findings indicate that each service group has its own patterns of innovation activities, providing valuable information about the state of affairs in service innovation, thereby are expected to help further study technology innovation activity in the service sector.

• The Journal of the Acoustical Society of Korea
• /
• v.14 no.1E
• /
• pp.56-64
• /
• 1995

The least mean fourth (LMF) adaptive algorithm is a stochastic gradient method that minimizes the error in the mean fourth sense. Despite its potential advantages, the algorithm is much less popular than the conventional least mean square (LMS) algorithm in practice. This seems partly because the analysis of the LMF algorithm is much more difficult than that of the LMS algorithm, and thus not much still has been known about the algorithm. In this paper, we explore the statistical convergence behavior of the LMF algorithm when the input to the adaptive filter is zero-mean, wide-sense stationary, and Gaussian. Under a system idenrification mode, a set of nonlinear evolution equations that characterizes the mean and mean-squared behavior of the algorithm is derived. A condition for the conbergence is then found, and it turns out that the conbergence of the LMF algorithm strongly depends on the choice of initial conditions. Performances of the LMF algorithm are compared with those of the LMS algorithm. It is observed that the mean convergence of the LMF algorithm is much faster than that of the LMS algorithm when the two algorithms are designed to achieve the same steady-state mean-squared estimation error.

• The Journal of Society for e-Business Studies
• /
• v.16 no.1
• /
• pp.17-34
• /
• 2011

Because the mobile services is composed of heterogeneous attributes, it is hard to find out customer's potential needs and more difficult to analyze customer's satisfaction factors toward mobile services. Therefore, this study approached this issue from a new viewpoint and applied Kano Model in analyzing customer's satisfaction and dissatisfaction factors toward mobile services. By using Kano Model, it tried to find out how differently customers perceive the mobile services. Firstly, we found out perception gaps of Korean and American customers toward mobile services. While Korean customers perceived most mobile services as indifferent service attributes, American customers perceived them as attractive service attributes. We could find main reasons of these perception differences from different national backgrounds and adoption rates of smart phones between two countries. Secondly, based on TRI scores, we categorized subjects into four groups and named as Pioneers, Explorers, Skeptics and Laggards. And then we examined the perception differences to mobile services among four groups. We found that there were no significant perception differences among four groups.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.11 no.2
• /
• pp.221-230
• /
• 2000

Bullying is the intentional, unprovoked abuse of power by one or more children to inflict pain on or cause distress to another child on repeated occasions. Bullying can be considered to be a form of child abuse：peer abuse. Victims suffer adverse effects in the short and long term. If bullying is regarded as a form of abuse then professionals have a duty to detect it, take it seriously, and ensure that it is deal with to reduce the child's suffering and minimize the potential long term effects. This study is aimed preliminarily the development of cognitive behavioral group therapy for school bullied. 202 normal middle school freshman responded to self report scales- Offer's Self-Image Questionnaire-Revised, Children's Depression Inventory, Spielberger State/Trait Anxiety scale, and Defining Issues Test. The data were analyzed with Pearson's correlation to test the relationship among the above 4 variables. Self Image, depression, and anxiety were correlated strongly each other. But moral development was not correlated with self image, depression, and anxiety. Five school bullied students were referred by their teacher for school maladjustment. The author tried 12 sessions of Cognitive-Behavioral group therapy and assessed their behaviors pre- and post intervention by above 4 scales. There were no significant different intervention effects statistically. But It is meaningful that improvement of psychological mindedness in diary written by subject in treatment sessions

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.17 no.4
• /
• pp.156-159
• /
• 2007

The red emission properties of $Mn^{4+}$ doped $SrAl_{12}O_{19}$ prepared by the solid-state reaction was investigated, in order to verify its potential to act as the red emitting phosphor of white LEDs. The emission spectrum exhibits a narrow band between $600{\sim}700 nm $ with four sharp peaks occurring at about 643, 656, 666, 671 nm due to the $^2E\to^4A_2$ transition of $Mn^{4+}$. The excitation spectrum exhibits a broad band between $200{\sim}500 nm$ with three peaks occurring at about 338, 398 and 468 nm, respectively. Moreover, the relative emission intensity of $SrAl_{12}O_{19}:Mn^{4+}$ with or without $CaF_2$ and MgO fluxes measured at excitation source 390 nm. The relative emission intensity of $SrAl_{12}O_{19}:Mn^{4+}$ containing 0.67mol% MgO was approximately 30% higher than that of the base composition sample. Strontium hexa-aluminate measured at room temperature as a function of the substituted Mg concentration. MgO was added to replace part of the $Al_2O_3$. Also, the relative emission intensity of $SrAl_{12}O_{19}:Mn^{4+}$ containing 0.67 mol% MgO and 0.67 mol% $CaF_2$ was approximately about 48% higher than that of the base composition $SrAl_{12}O_{19}:Mn^{4+}$.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.2
• /
• pp.113-120
• /
• 2016

Technology based would-be entrepreneurs have constantly increased as coming with increasing demands for technology based startup. However, technology based startup need to go through throne field in the preparation and launching process. This paper help technology based would be entrepreneurs recognizing and pivoting all potential fatal flaws covering entrepreneurs to BM with strategies by providing self check-up lists. This paper have developed all check list based upon the previous literature reviews about technology commercialization with carrying Focused Group Interview with mentor and investor involved in the early stage of venture growth. In particular, this paper have applied these tools over 104 participants(would-be entrepreneur and entrepreneurs in the early startup) attending in Hanbat Startup Item Validation Program and Startup Leading University program. This paper developed the mega categories of list as follows: Entrepreneurship, technology and patent, target customer and market, product, BM and strategy. It also developed 17 different concept of components and 58 specific sub-lists under maga list. The research results of paper will provide solid foundation of communication with participants about checking up their state of preparation for startup as applying to mentoring for would-be entrepreneurs and to entrepreneurship education.