• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.316-319
• /
• 1996

In this study, characteristics of ultrasonic transducer fabricated with porous piezoelectric resonator are investigated, 3-D underwater object recognition using the self-made ultrasonic transducer and SOFM(Self-Organizing Feature Map) neural network are presented. The self-made transducer was satisfied the required condition of ultrasonic transducer in water, and the recognition rates for the training data and the testing data were 100 and 95.3% respectively. The experimental results have shown that the ultrasonic transducer fabricated with porous piezoelectric resonator could be applied for sonar system.

• 한국세라믹학회지
• /
• 제40권9호
• /
• pp.837-841
• /
• 2003

Duplex microstructure of zirconia and alumina has been achieved via an organic-inorganic solution technique. Zirconium 2,4-pentanedionate, aluminum nitrate and polyethylene glycol were dissolved in ethyl alcohol without any precipitation. The organicinorganic precursor gels were turned to porous powders having volume expansion through explosive, exothermic reaction during drying process. The volume expansion was caused by abrupt decomposition of the organic groups in the gels during the vigorous exothermic reaction. The volume expanded, porous powders were crystallized and densified at 1500$^{\circ}C$ for 1 h. At the optimum amount of the PEG polymer, the metal cations were well dispersed in the solution and a homogeneous polymeric network was formed. The polymer content also affected on the specific surface area of the synthesized powder and the grain size of the sintered composite.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1997년도 추계학술대회 논문집
• /
• pp.321-324
• /
• 1997

In this study, Efficiency estimation of ultrasonic sensor fabricated with porous piezoelectric resonator by experiment of 3-D underwater object recognition are presented. The sensor was satisfied with requirement of ultrasonic sensor. The recognition rates for the fixed objects and the translation-rotation objects are 95.3 and 92.7[%], respectively using porous piezoelectric ultrasonic sensor and SOFM neural network. According to the experimental results, It is believed that the self-made ultrasonic sensor can be applied as underwater ultrasonic sensor.

• Fibers and Polymers
• /
• 제2권2호
• /
• pp.64-70
• /
• 2001

A three-dimensional, porous collagen/chitosan complex sponge was prepared to closely simulate basic extracellular matrix (ECM) constitutes, collagen and glycosaminoglycan. The complex sponge was prepared by a lyophilization method and had the regular network with highly porous structure, suitable for cell adhesion and growth. The pores were well interconnected, and their distribution was fairly homogeneous. The complex sponge was crosslinked using 1-ethyl-3-(3-dimethyl aminopropyl) carbodiimide (EDC) and N-hydroxysuccinimide (NHS) to increase its boilogical stability and enhance its mechanical properties. The crosslinking medium has a great effect on the inner structure of the sponge. The homogeneous, porous structure of the sponge was remarkably collapsed in an aqueous crosslinking medium. However, the morphology of the sponge remained almost intact in a water/ethanol mixture crosslinking milieu. Mechanical properties of the collagen/chitosan sponge were significantly enhanced by EDC-mediated crosslinking. The potential of the sponge as a scaffold for tissue engineering was investigated using a Chinese hamster ovary cell (CHO-K1) line.

• 한국분말재료학회지
• /
• 제8권3호
• /
• pp.163-167
• /
• 2001

A bulk porous $CaZrO_3/MgO$ composite with plantinum nano-dispersion was synthesized in air atmosphere through the combination of several in situ reactions, including the pyrolysis of $PtO_2$. A mixture of $CaMg(CO_3)_2$(dolomite), $ZrO_2$, $PtO_2$ and LiF (0.5 wt%, as an additive) was cold isostatically pressed at 200 MPa and sintered at $1100^{\circ}C$ for 2 h. The porous $CaZrO_3/MgO/Pt$ composite ($CaZrO_3/MgO$ : Pt=99 : 1 in volume) had a uniformly open-porous structure (porosity: 56%) with three-dimensional (3-D) network and a narrow pore-size distribution, similarly to the porous $CaZrO_3/MgO$ composites reported before. Catalytic Properties (viz., NO direct decomposition and NO reduction by $C_2H_4$) of the $CaZrO_3/MgO/Pt$ composite were investigated up to $900^{\circ}C$. In the absence of oxygen, the NO conversion rate reached ~52% for the direct decomposition and ~100% for the reduction by $C_2H_4$, respectively. The results suggest the possibility of the porous composite as a multifunctional filter, i.e., simultaneous hot gas-filtering and $de-NO_x$ in one component.

• 터널과지하공간
• /
• 제8권4호
• /
• pp.275-286
• /
• 1998

균열연결망 모델에서의 투수계수 텐서, 주 투수계수 그리고 주 투수계수 방향들에 대한 인자에 근거해서 유효투수계수와 대표요소체적을 구하였다. 전체브록에 대한 소블록의 투수계수의 계산을 통해서 유효투수계수는 조화평균과 산술평균 사이의 범위임을 알 수 있었다. 정육면체 모델에서 체적의 증가에 따른 유량의 변화계산에 대한 수치실험으로부터 유량의 변화는 모델의 체적이 대표요소체적에 접근함에 따라 감소함을 보여 주어ST다. 터널로의 지하수 유입량은 대표요소체적 개념보다는 터널길이대 모델크기의 비에 더 큰 영향을 받는다고 볼 수 있다. 그리고 균열연결망 모델과 등가다공성 모델에서의 지하수 유입량은 정확히 일치하지 않았으며 특히 모델크기에 대한 터널길이가 작을수록 그 차이가 크게 발생하였다.

• 한국세라믹학회지
• /
• 제45권10호
• /
• pp.579-583
• /
• 2008

A porous $Al_2O_3$, scaffold coated with tricalcium phosphate(TCP) was fabricated by replica method using polyurethane(PU) foam as a fugitive material. Successive coatings of $Al_2O_3$ and hydroxyapatite(HAp) were applied via dip coating onto polyurethane foam, which has a slender and well interconnected network. A porous structure was obtained after sequentially burning out the foam and then sintering at $1500^{\circ}C$. The HAp phase was changed to TCP phase at high temperature. The scaffold showed excellent interconnected porosity with pore sizes ranging from $300{\sim}700{\mu}m$ in diameter. The inherent well interconnected structural feature of PU foam remained intact in the fabricated porous scaffold, where the PU foam material was entirely replaced by $Al_2O_3$ and TCP through a consecutive layering process. Thickness of the $Al_2O_3$ base and the TCP coating was about $7{\sim}10{\mu}m$ each. The TCP coating was homogeneously dispersed on the surface of the $Al_2O_3$ scaffold.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 춘계 학술대회
• /
• pp.231-238
• /
• 2005

본 연구에서는 유동저항이론을 기초로 하여 연속다공체, 분리단열망 및 연속다공체-분리단열망 공존암반과 같은 3가지 암반을 대상으로 암반 특성에 따른 지하수 유동저항 개념 모델링 및 관계식을 제안하였다. 정상상태조건에서 밀도변동은 고려하지 않았으며 유한 체적법을 이용하였다. 각종 물성치는 블록 중심에서 정의되고, flux는 블록면에서 정의되는 staggered 격자 체계하에서 모든 블록에 대해 Darcy 법칙이 적용되었다. 접촉면에서의 투수계수는 인접면 중심에서 정의된 물성치의 조화평균값을 사용하였다. 유동저항개념을 이용하여 인접한 블록간의 상대압력차와 flux의 관계를 표현하였다. 개개의 단열에서의 유동은 다공암반에서 이용된 방정식과 동일한 형태의 2차원 방정식으로 모사되었다. 본 논문에서 제안된 모델은 추후 다양한 암반 특성별 유동 모사 기법을 개발하는데 많은 기여를 할 것으로 기대된다.

• Journal of the Korean Wood Science and Technology
• /
• 제41권4호
• /
• pp.302-309
• /
• 2013

Sodium hydroxide-urea 수용액을 이용한 다공성 셀룰로오스계 에어로겔은 용해, 겔화, 재생, 유기용매 치환과 동결건조과정에 의해 제조되었다. 에어로겔의 구조적 특성과 다공성은 주사전자현미경과 질소흡착장치를 이용하여 분석하였다. 그 결과, 용해펄프는 완전히 용해되었지만, 여과지와 홀로셀룰로오스는 원심분리과정에서 수용액에 용해된 부분과 용해되지 않은 부분으로 구분되었다. 용해펄프 에어로겔의 표면은 다공성 공극, 내부는 그물모양의 망목상 구조가 관찰되었다. 여과지와 홀로셀룰로오스 에어로겔은 표면이 압축된 다공성 네트워크 형태였고, 내부는 open-pore 구조의 나노피브릴 네트워크로 구성되었다. 홀로셀룰로오스 에어로겔에서 수용액에 용해되지 않는 형태의 섬유들이 관찰되었다. 용해펄프로부터 만들어진 에어로겔의 비표면적은 260~326 $m^2/g$ 범위였고, 농도 증가와 함께 감소하였다. 그러나 여과지 에어로겔의 비표면적(198~418 $m^2/g$)은 농도 증가와 함께 증가하였다. 홀로셀룰로오스 에어로겔은 2% 농도에서는 137 $m^2/g$로 농도의 증가와 함께 증가하여 4% 농도에서 401 $m^2/g$로 최댓값을 보여주었고, 5% 농도에서 감소하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.655-656
• /
• 2010