• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.4
• /
• pp.277-284
• /
• 2021

The ballasted flocculation effects of the mill scale and magnetite on activated sludge were investigated. Both ballasted flocculants (BF) could remarkably improve the sludge settleability in terms of zone settling velocity (ZSV) and sludge volume index (SVI). With the BF dosage of 0.2 to 2.0 g-BF/g-SS, the magnetite particles showed better efficiency on improving settling behavior of activated sludge than the mill scale due to higher surface area and hydrophobic property. The efficiency of SVI₃₀ with magnetite injection was 2.5 to 11.3% higher than mill scale injection and that of the ZSV appreciated from 23.7% to 44.4% for magnetite injection. Averaged floc size of the BF sludge with magnetite dosage (0.5 g-BF/g-SS) was 2.3 times higher than that of the control sludge. Dewaterability of the sludge was also greatly improved by addition of the BF. The specific resistance to filtration (SRF) was reduced exponentially with increasing the dosage of BF. However, the BF's particle size effect on the SRF looks to be marginal. Consequently, for improving the dewaterability, the BF played a physical role to remove the pore water of the biological flocs by intrusive attachment and a chemical role to induce aggregation of the flocs by charge neutralization.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1052-1057
• /
• 2004

A small-scale loop heat pipe with polypropylene wick was fabricated and tested for its thermal performance. The container and tubing of the system was made of stainless steel and several working fluids were used to see the difference in performance including methanol, ethanol, acetone, R134a, and water. The heating area was 35 mm ${\times}$ 35 mm and there were nine axial grooves in the evaporator to provide a vapor passage. The pore size of the polypropylene wick inside the evaporator was varied from 0.5 m to 25 m. The size of condenser was 40 mm (W) ${\times}$ 50 mm (L) in which ten coolant paths were provided. The inner diameter of liquid and vapor transport lines were 2.0 mm and 4.0 mm, respectively and the length of which were 0.5 m. The PP wick LHP was operated with methanol, acetone, and ethanol normally. R134a was not compatible with PP wick and water was unsuitable within operating limit of $100^{\circ}C$. The minimum thermal load of 10 W (0.8 W/cm2) and maximum thermal load of 80 W (6.5 W/cm2) were achieved using methanol as working fluid with the condenser temperature of $20^{\circ}C$ with horizontal position.

• Journal of Mechanical Science and Technology
• /
• v.19 no.4
• /
• pp.1052-1061
• /
• 2005

A small-scale loop heat pipe (LHP) with polypropylene wick was fabricated and tested for investigation of its thermal performance. The container and tubing of the system were made of stainless steel and several working fluids were tested including methanol, ethanol, and acetone. The heating area was $35\;mm\;{\times}\;35\;mm$ and nine axial grooves were provided in the evaporator to provide vapor passages. The pore size of the polypropylene wick inside the evaporator was varied from $0.5\; {\mu}m\;to\;25\;{\mu}m.$ The inner diameter of liquid and vapor transport lines were 2.0 mm and 4.0 mm, respectively and the length of which were 0.5 m. The size of condenser was $40\;mm\;(W)\;{\times}\;50\;mm\;(L)$ in which ten coolant paths were provided. Start-up characteristics as well as steady-state performance was analyzed and discussed. The minimum thermal load of $10\;W\;(0.8\;W\;/cm^{2})$ and maximum thermal load of $80\;W\;(6.5\;W\;/cm^{2})$ were achieved using methanol as working fluid with the condenser temperature of $20^{\circ}C$ with horizontal position.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.1-1
• /
• 2011

We developed a new generalized synthetic procedure, called as "heat-up process," to produce uniform-sized nanocrystals of many transition metals and oxides without a size selection process. We were able to synthesize uniform magnetite nanocrystals as much as 1 kilogram-scale from the thermolysis of Fe-oleate complex. Clever combination of different nanoscale materials will lead to the development of multifunctional nano-biomedical platforms for simultaneous targeted delivery, fast diagnosis, and efficient therapy. In this presentation, I would like to present some of our group's recent results on the designed fabrication of multifunctional nanostructured materials based on uniform-sized magnetite nanoparticles and their medical applications. Uniform ultrasmall iron oxide nanoparticles of <3 nm were synthesized by thermal decomposition of iron-oleate complex in the presence of oleyl alcohol. These ultrasmall iron oxide nanoparticles exhibited good T1 contrast effect. In in vivo T1 weighted blood pool magnetic resonance imaging (MRI), iron oxide nanoparticles showed longer circulation time than commercial gadolinium complex, enabling high resolution imaging. We used 80 nm-sized ferrimagnetic iron oxide nanocrystals for T2 MRI contrast agent for tracking transplanted pancreatic islet cells and single-cell MR imaging. We reported on the fabrication of monodisperse magnetite nanoparticles immobilized with uniform pore-sized mesoporous silica spheres for simultaneous MRI, fluorescence imaging, and drug delivery. We synthesized hollow magnetite nanocapsules and used them for both the MRI contrast agent and magnetic guided drug delivery vehicle.

• Applied Microscopy
• /
• v.30 no.2
• /
• pp.205-212
• /
• 2000

Present study was performed to observe the surface ultrastructures of Stictadora furcatum (Trematoda: Heterophyidae). Adult worms were recovered from the cat experimentally infected with metacercariae, and were prepared for scanning electron microscopy. The body was leaf-like and ventrally concave. The oral sucker armed with prominent tegumental spines on the inner surface, and it's lips were obscure. Sensory papillae (type I) in single or grouped forms symmetrically arranged around the oral sucker. The ventrogenital opening retained protruding gonotyl spines and sperms discharged from the genital pore . The body surface was covered with scale-like multipointed tegumental spines. The density and digitated point of spines were gradually decreased toward the posterior end of the body. The digitated points of spines on the anterior portion were 9-12, on the middle were 7-8 and 5-6, and on the posterior were 2-3 and peg-like. Although the tegumental ultrastructure of S. fuscatum was generally similar to those of other heterophyid flukes , the oral sucker with tegumental spines on the inner surface and without obvious lips, and the ventrogenital opening with protruding gonotyl spines were suggested to be the characteristic features.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.67-67
• /
• 2004

다공성 물질을 건조하거나 습한 환경에 노출시키면 열과 수분이 외부로 전달된다. 열 및 수분 전달로 인한 은도 및 습도의 변화는 물질 체적을 변화시켜 습열 응력을 유발시킨다 즉 다공성 제품의 품질은 외양뿐만 아니라 건조 공정 시의 온도, 수분함유량, 응력, 변형률 등의 공정변수에 크게 영향을 받는다. 최근까지도 다공성 물질의 생산 공정은 다수의 공정변수를 갖는 복합공정이기 때문에 이들의 영향을 정량적으로 평가하는 것은 매우 까다로워 현장 경험에 기초한 기술자의 노하우에 의존해 왔다.(중략)

• Environmental Engineering Research
• /
• v.9 no.5
• /
• pp.193-200
• /
• 2004

A study of the treatment of piggery wastes using a multilayered metal-activated carbon system followed by carbon bed filtration was carried out at bench scale. From the physicochemical properties obtained from samples treated with aqueous solutions containing metallic ions such as Ag$^+$, Cu$^{2+}$, Na$^{-}$, K$^+$ and Mn$^{2+}$, main inspections are subjected to isothem shape, pore distribution with micropore, SEM and EDX. Multilayered metal-activated carbons were contacted to waste water to inwestigate the simultaneous catalytic effect for the COD, BOD, T-N and T-P removal. From these removal performance was achieved. The high efficiency of the multilayered metal-activated carbon bed, satisfactory removal performance was achieved. The high efficiency of the multilayered metal-activated carbon bed was derermined by the properties of this material for trapping, catalytic effect and adsorption of organic solid particles.

• Journal of the Korean Ceramic Society
• /
• v.37 no.11
• /
• pp.1078-1083
• /
• 2000

정전안정화 및 입체안정화를 동시에 적용한 복합안정화기구에 의하여 25 부피%의 나노 $Al_2$O$_3$슬러리를 제조하고, 이로부터 얻은 주입성형체, 원심성형체, 진공성형체의 기공구조 분석을 통하여 입자충전거동을 살펴보았다. 나노 알루미나 분말의 습식 성형체의 충전구조는 성형방법에 의하여 가해지는 외력의 영향을 크게 받지만, 반발력을 제공하는 표면장벽층의 상호작용에 의해서도 현저한 차이를 보이는 것으로 나타났다. 예비소결실험을 통하여 나노분말에서도 기공크기가 작고, 크기분포가 좁으며, 높은 밀도를 가진 균일성형체의 미세구조가 소결미세구조를 균일하게 하는데 필수적인 조건임을 확인하였다.

• Proceedings of the KAIS Fall Conference
• /
• 2004.11a
• /
• pp.272-273
• /
• 2004

Filter media are one of themost important choices when bilfiltration is applied. Filter media provide adsorbing microbes with available sites for residence and the residential cells grow to degrade or decompose target waste gases. Up to date, filter media were only qualitatively analyzed. As a quantitative approach to filter material for biofiltration, a simple model based on reaction kinetics and mass action law (Ottengraf's Model in 1983) was presented. Cork, zeolite, and granulated activated carbon were tested in terms of effective surface area, cell covered fraction of adsorbing sites, surface roughness, and pore size distribution. The cell covered fraction, surface roughness and hydrophilicity was found to be closely related to the efficiency of gas degradation in biofiltration. The cork was the best candidate for cell residence and growth in this work.

• Journal of Surface Science and Engineering
• /
• v.26 no.5
• /
• pp.255-262
• /
• 1993

Major parameters determining the extent of Ca utilization were investigated for their calcination/sulfation behavior of limestone in the AFBC(Atmospheric Fluidized Bed Combustion) environments. Three different particle sizes of Fredonia limestone were investigated in the lab-scale tubular reactor. The results of the calcination codnversion of limestone imply that thesd decomposition rate of CaCO3 into CaO is dependent on the amount of heat which limestone absorbed. Hg porosimeter measurement of calcined limestone illustrated that surface area and pore volume are increased with decreasing particle size. Raw Fredonia limestone and sequentially as well as simultaneously calcined/sulfated limestones were also examined using SEM. The SEM Studied showed that the surface of the calcined limestone particles is more diffusive nature than that of the parent calcite. However, the sulfur distribution pattern of simultaneously-treated particles and that of the se-quentially-treated one shows no difference.