• Korean Journal of Remote Sensing
• /
• v.30 no.4
• /
• pp.417-430
• /
• 2014

We have found an error in the operational OMI HCHO columns, and corrected it by applying a background parameterization derived on a 4th order polynomial fit to the time series of monthly average OMI HCHO data. The corrected OMI HCHO agrees with this understanding as well as with the other sensors measurements and has no unrealistic trends. A new scientific approach, statistical analyses with EOF and SVD, was adapted to reanalyze the consistency of the corrected OMI HCHO with other satellite measurements of HCHO, CO, $NO_2$, and fire counts over Africa. The EOF and SVD analyses with MOPITT CO, OMI $NO_2$, SCIAMAHCY, and OMI HCHO show the overall spatial and temporal pattern consistent with those of biomass burning over these regions. However, some discrepancies were observed from OMI HCHO over northern equatorial Africa during the northern biomass burning seasons: The maximum HCHO was found further downwind from where maximum fire counts occur and the minimum was found in January when biomass burning is strongest. The statistical analysis revealed that the influence of biogenic activity on HCHO wasn't strong enough to cause the discrepancies, but it is caused by the error in OMI HCHO from using the wrong Air Mass Factor (AMF) associated with biomass burning aerosol. If the error is properly taken into consideration, the biomass burning is the strongest source of HCHO seasonality over the regions. This study suggested that the statistical tools are a very efficient method for evaluating satellite data.

• Korean Journal of Food Science and Technology
• /
• v.23 no.1
• /
• pp.88-92
• /
• 1991

To analyze the effects of the system parameters on the target parameters, which include the amount of water evaporation, water solubility index(WSI) and water absorption index(WAI), test trials of fractional factorial design of the three process variables at three levels were carried out for corn grit with a laboratory twin-screw extruder with three different screw configurations. The system parameters collected from the trials, such as extrusion temperature, specific mechanical energy input(SME) and mean residence time(RT), were showed the ranges of $129{\sim}182^{\circ}C$, $67{\sim}163\;kwh/ton$ and $12{\sim}34\;sec$, respectively. Within these ranges of the system parameters, the target parameters were able to be quantified by using multiple regression equations. The correlation of results with the system parameters blocked by the screw configuration as dependent variables, yield correlation coefficients above 0.90, and the correlation using the system parameters obtained from whole experiment system as the dependent variables yield correlation coefficients around 0.80. The functional relationship, which can be quantified by second order polynomial regression equation with only two system parameters within necessary degree of accuracy, can he graped in three dimensional surface response and contour diagrams.

• Microbiology and Biotechnology Letters
• /
• v.31 no.1
• /
• pp.83-89
• /
• 2003

2,4-Dichlorophenoxyacetic acid (2,4-D) as a widely used herbicide has caused serious environmental problems because of its difficult decomposition in nature. We isolated the strain capable of metabolizing 2,4-D as sole carbon and energy source by an enrichment culture technique from the 2,4-D contaminated soil collected at orchard in Gwangju, Korea. This strain was identified tentatively as Aeromonas sp. NOH2. With this strain, we established the response surface methodology (Box-Behnken Design) to optimize the principle parameters for maximizing biodegradation of 2,4-D such as culture pH, temperature, and nutrient concentration in liquid batch culture. The ranges of parameters were obtained from preliminary works done at our laboratory and chosen as 5.5, 6.5, and 7.5 for pH, 25, 30, and $35^{\circ}C$ for temperature, and 5, 20, and 35 g/1 nutrient concentration. Initial concentration of 2,4-D was 500 ppm and nutrient source was tryptic soy broth. The experimental data were significantly fitted to a second order polynomial equation using multiple regression. The most important parameter influencing 2,4-D degradation and biomass production was nutrient concentration. For 2,4-D degradation, the optimum values of pH and temperature, and nutrient concentration were obtained at pH (6.5), temperature (31.8 to $32.1^{\circ}C$), and nutrient concentration (29.6 to 30.1.0 g/1).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.6
• /
• pp.761-768
• /
• 2013

We conducted two feeding trials to investigate the optimal feeding frequency of juvenile Korean rockfish Sebastes schlegeli fed a commercial diet of expanded pellets containing 47.2% crude protein, 9.2% crude lipid, and 14.5% ash at two different water temperatures. In the first experiment, triplicate groups of 20 fish with an average weight of 2 g were fed an equal amount of diet (5.97% based on body weight) at one of six feeding frequencies (2, 3, 4, 5, 7, or 9 meals/day) for four weeks at $17.5^{\circ}C$. After four weeks, we measured weight gain (WG), specific growth rate (SGR), feeding efficiency (FE), and protein efficiency ratio (PER). Fish fed diet five meals/day grew significantly better than those fed nine meals/day. The second experiment used identical experimental conditions and feeding regions, except the food ration was slightly less (5.92% based on body weight) and the water temperature was increased to $20^{\circ}C$. After four weeks, we again measured WG, SGR, FE and PER. Fish fed seven meals/day grew significantly faster than those fed 2, 3, 4, or 9 meals/day. Whole-body protein levels in fish fed three meals/day was higher than those fed four meals/day in $17.5^{\circ}C$ water, but whole-body lipids in the fish fed four meals/day was higher than those fed two meals/day in $20^{\circ}C$ water. A second-order polynomial analysis based on WG suggested the optimal feeding frequency for juvenile Korean rockfish was five meals/day at $17.5^{\circ}C$ and six meals/day at $20^{\circ}C$, indicating that fish reared in higher water temperature require higher feeding frequencies.

• Journal of Radiation Protection and Research
• /
• v.29 no.1
• /
• pp.65-71
• /
• 2004

A multi-attribute utility analysis was investigated as a tool for the decision support of countermeasures in early phase of a nuclear accident. The utility function of attributes was assumed to be the second order polynomial expressions, and the weighting constant of attributes was determined using a swing weighting method. Because the main objective of this study focuses on the applicability of a multi-attribute utility analysis as a tool for the decision support of countermeasures in early phase of a nuclear accident, less quantifiable attributes were not included due to lack of information. In postulated accidental scenarios for the application of the designed methodology, the variation of the numerical values of total utility for the considered actions, e.g. sheltering, evacuation and no action, was investigated according to the variation of attributes. As a result, it was shown that the numerical values of total utility for the actions are distinctly different depending on the exposure dose and monetary value of dose. As increasing in both attributes, the rank of the numerical values of total utility increased for evacuation, which is more extreme action than for sheltering, while that of no action decreased. As expected probability of high dose is higher, the break-even values for the monetary value of dose, which are the monetary value of dose when the ranking of actions is changed, were lower. In audition, as aversion psychology for dose is higher, the break-even values for dose were lower.

• Korean Journal of Health Education and Promotion
• /
• v.13 no.2
• /
• pp.130-166
• /
• 1996

As compared with body height and body weight by ages and sexes, by means of the data reported under other researchers from 1967 to 1994 for 33 years, this study obtained the estimate value of body height and body weight by ages and sexes for the same period, and figured out prediction value of body height and body weight in the ages of between 6 and 14 from 1995 to 2000. These surveys and measurements took for one year from October 1st 1994 to September 30th. As shown in the 〈Table 1〉, in order to calculate the establishment, estimate value and prediction value of the chronological regression model of body height and body weight, by well-grounded 17 representative research papers, this research statistically tested propriety of liner regression model by the residual analysis in advance of being reconciled to simple liner regression model by the autonomous variable-year and the subordinate variable-body weight and measured prediction value, theoretical value from 1962 to 1994 by means of 2nd or 3rd polynomial regression model, with this redult did prediction value from 1995 to 2000. 1. Chronological Change of Body Height and Body Weight The analysis result from regression model of the chronological body height and body weight for the aged 6 - 16 in both sexes ranging from 1962 to 1994, corned from the 〈Table 2-20〉. On the one hand, the measurement value of respective researchers had a bit changes by ages with age growing, but the other hand, theoretical value, prediction value showed the regular increase by the stages and all values indicated a straight line on growth and development with age growing. That is, in case of the aged 6, males had 109.93cm in 1962 and females 108.93cm, but we found the increase that males had 1I8.0cm, females 1I3.9cm. In theoretical value, prediction value, males showed the increase from 109.88cm to 1I7.89cm and females from 109.27cm to 1I5.64cm respectively. There was the same inclination toward all ages. 2. Comparision to Measurement Value and Prediction Value of Body Height and Body Weight in 1994 As shown in the 〈Table 21〉, in case of body height, measurement value and prediction value of body height and body weight by ages and sexes almost showed the similiar inclination and poor grade, in case of body weight, prediction value in males had a bit low value by all ages, and prediction value in females had a high value in adolescence, to the contrary, a low value in adult. 3. Prediction Value of Body Height and Body Weight from 1995 to 2000 This research showed that body height and body weight remarkably increased in adolescence but slowly in adult. This study represented that Korean physique was on the increase and must be measured continually hereafter.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.3
• /
• pp.59-67
• /
• 2013

Reed-Solomon (RS) codes are powerful error-correcting codes used in diverse applications. Recently, algebraic soft-decision decoding algorithm for RS codes that can correct the errors beyond the error correcting bound has been proposed. The algorithm requires very intensive computations for interpolation, therefore an efficient VLSI architecture, which is realizable in hardware with a moderate hardware complexity, is mandatory for various applications. In this paper, we propose an efficient architecture with low hardware complexity for interpolation in soft-decision list decoding of Reed-Solomon codes. The proposed architecture processes the candidate polynomial in such a way that the terms of X degrees are processed in serial and the terms of Y degrees are processed in parallel. The processing order of candidate polynomials adaptively changes to increase the efficiency of memory access for coefficients; this minimizes the internal registers and the number of memory accesses and simplifies the memory structure by combining and storing data in memory. Also, the proposed architecture shows high hardware efficiency, since each module is balanced in terms of latency and the modules are maximally overlapped in schedule. The proposed interpolation architecture for the (255, 239) RS list decoder is designed and synthesized using the DongbuHitek $0.18{\mu}m$ standard cell library, the number of gate counts is 25.1K and the maximum operating frequency is 200 MHz.

• 대한공업교육학회지
• /
• v.36 no.1
• /
• pp.115-130
• /
• 2011

When the hollow cylinder structure moves in underwater with high speed structural can be propagated from the end of the structure to the front side. This noise can reduce the sensitivity of the conformal array which installed in the surface of the cylinder. To reduce this noise propagation it is suggested to install two self-reduction rings at the surrounding of the cylinder which is 500mm in diameter and 840mm in length. The places of the two noise reduction rings are 120mm and 240mm point from the end of the structure. Two noise reduction rings reduced 10.1 % of maximum stress. When outside noise frequency applied to the structure from the 4kZ to 6kHz, 20dB noise reduction was calculated using 6 order polynomial equation. When outside noise frequency also applied to the structure with 200Hz, 500Hz, 900Hz, maximum sound pressure level point moved to the end of the structure. Most conformal sensors are fabricated at the front side of the structure. Based on the simulation results proposed two rings can be reduced noise propagation from the tail of the structure effectively.

• Progress in Medical Physics
• /
• v.9 no.4
• /
• pp.259-266
• /
• 1998

To achieve the 2D dose distribution around the designed high dose rate Ir-192 source substitution for Co-60 brachytherapy source, we determined the exposure rate constant and tissue attenuation factors as a large depth as a 20 cm from source center. The exposure rate constant is used for apparent activity in designed source with self-absorption and encapsulation steel wall. The tissue dose delivered from the 4401 segments of 2.5 mm in a diameter and 2.5 mm height of disk-type source layer. In the experiments, the tissue attenuation factors include the tissue attenuation and multiple scattering in a medium surrounding the source. The fitted the polynomial regression with 4th order for the tissue attenuation factors are very closed to the experimental measurement data within ${\pm}$1% discrepancy. The Meisberger's constant showed the large uncertainty in large distance from source. The exposure rate constant 4.69 Rcm$^2$/mCi-hr was currently used for determination of apparent activity of source and air kerma strength was obtained 0.973 for tissue absorbed dose from the energy spectrum of Ir-192 source. In our experiments with designed high dose rate brachytherapy source, the apparent activity of Ir-192 source was delivered from the 54.6 % of actual physical source activity through the self-absorption and encapsulation wall attenuations. This paper provides the 2-dimensional dose tabulation from unit apparent activity in a water medium for dose planning includes the multiple scattering, source anisotropy effect and geometric factors.

• Journal of Korea Multimedia Society
• /
• v.16 no.5
• /
• pp.577-590
• /
• 2013

Shamir's (k,n)-threshold secret sharing scheme is not secure against cheating by attacker because the signature of participants is omitted. To prevent cheating, many schemes have been proposed, and a proactive secret sharing is one of those. The proactive secret sharing is a method to update shares in the secret sharing scheme at irregular intervals. In this paper, a proactive image secret sharing scheme over $GF(2^8)$ is proposed for the first time. For the past 30 years, Galois field operation is widely used in order to perform the efficient and secure bit operation in cryptography, and the proposed scheme with update phase of shadow image over $GF(2^8)$) at irregular intervals provides the lossless and non-compromising of secret image. To evaluate security and efficiency of images (i.e. cover and shadow images) distortion between the proposed scheme and the previous schemes, embedding capacity and PSNR are compared in experiments. The experimental results show that the performances of the embedding capacity and image distortion ratio of the proposed scheme are superior to the previous schemes.