• Elastomers and Composites
• /
• v.44 no.3
• /
• pp.252-259
• /
• 2009

Bifunctional silane (TESPD) is added into silica filled SBR compound and its effects with respect to the vulcanization properties, the processability, and the physical properties are investigated. The addition of the TESPD into silica filled SBR compound increases the degree of crosslinking by formation of a strong 3-dimensional network structure with silica surface via coupling reaction, which results in an improved mechanical property. It also improves the processabilities compared to the Control compound.

• Journal of the Korean Ceramic Society
• /
• v.39 no.4
• /
• pp.336-340
• /
• 2002

Pure and nano-sized $TiO_2$ and $CaTiO_3$ powders were fabricated by a polymeric steric entrapment route and planetary milling process. An ethylene glycol was used as a polymeric carrier for the preparation of organic-inorganic precursors. Titanium isopropoxide and calcium nitrate were dissolved in liquid-type ethylene glycol without any precipitation. At the optimum amount of the polymer, the metal cations were dispersed in solution and a homogeneous polymeric network was formed. The dried precursor ceramic gels were turned to porous powders through calcination process. The porous powders were crystallized at low temperatures and the crystalline powders were planetary milled to nano size.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.409-411
• /
• 2005

A series of inorganic-organic hybrid membranes were prepared with a systematic variation of titanium dioxidenanoparticles content. Their water uptake, methanol permeability and proton conductivity as a function of inorganic oxide content were investigated. The results obtained show that the inorganic oxide network decreases the proton conductivity and water swelling. It is also found that increase in inorganic oxide content leads to decrease of methanol permeability. In terms of the morphology, membranes are homogeneous and exhibit a good adhesion between inorganic domains and the polymer matrix. The properties of the composite membranes are compared with the standard nation membrane.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.1
• /
• pp.29-33
• /
• 2010

As the demands for the higher data transmission speed and capacity as well as integration density grow throughout the network, much works have being done in order to integrate the Electrical PCB with Optical PCB. However, one of the most troublesome problems in the commercial bonding process is to need the high temperature for the bonding. Due to the high temperature bonding process, lots of side problems are followed such as warpage and crack, etc. In this paper, we tried to develop the new bonding technology with low temperature around $100^{\circ}C$. As a result of this study, the PCB bonding technology with high bonding strength is demonstrated with the value of bonding strength from 7 to 8 MPa at the temperature of $100^{\circ}C$.

• Korea-Australia Rheology Journal
• /
• v.12 no.1
• /
• pp.77-81
• /
• 2000

Rheological behavior of thermoset/thermoplastic blends of epoxy/polyethersulphone (PES) was monitored during curing of the epoxy resin. During the isothermal curing of the mixture, a fluctuation in viscosity just before the abrupt viscosity increase was observed. This fluctuation is found to be due to the phase separation of PES from the matrix epoxy resin during the curing. The experimentally observed viscosity fluctuation is simulated with a simple two phase suspension model in terms of the increase in domain size. The viscosity profiles obtained experimentally at different isothermal curing temperatures are in good agreement with the predictions from the simple model taking into account the viscosity change due to the growth of PES domain and the network formation of the epoxy matrix.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.3
• /
• pp.244-256
• /
• 2010

Radio frequency identification(RFID) combined with wireless technology has good potential for structural health monitoring(SHM). We describe several advantages of RFID and wireless technologies for SHM, and review SHM examples with working principles, design and technical details for damage detection, heat exposure monitoring, force/strain sensing, and corrosion detection in concrete, steel, carbon fiber reinforced polymer(CFRP), and other materials. Various sensors combined with wireless communication are also discussed. These methodologies can be readily developed, implemented, and customized. There are some technical difficulties, but solutions are being addressed. Lastly, a surface acoustic wave-based RFID system is presented, and possible future trends of SHM based on RFID and wireless technology are presented.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2006.03a
• /
• pp.613-619
• /
• 2006

This paper introduces a new structural health monitoring using a nano sensor. The sensor is made of nano smart composite material based on carbon nanotubes. The nano sensor is fabricated as a thin and narrow polymer film sensor that is bonded or deposited onto a structure. The electrochemical impedance and dynamic strain response of the neuron change due to deterioration of the structure where the sensor is located. A network of the long nano sensorcan form a structural neural system to provide large area coverage and an assurance of the operational health of a structure without the need for actuators and complex wave propagation analyses that are used with other methods.

• Bulletin of the Korean Chemical Society
• /
• v.19 no.11
• /
• pp.1165-1168
• /
• 1998

2-Tetrahydropyranyl methacrylate with a self-crosslinkable moiety was copolymerized with methyl methacrylate and 4-[(2-methacryloxyethyl)methylamino]-4'-nitrostilbene or 4-[(2-methacryloxyethyl)ethylamino]-4'nitroazobenzene to provide second-order nonlinear optical property. Glass transition temperatures (Tg of the copolymers are around 140 ℃. The copolymers were soluble in common organic solvents such as tetrahydrofuran (THF), cyclohexanone, and N,N-dimethylformamide (DMF). Poling was carried out at 140 ℃ for 20 min and identified with UV-Vis spectroscopy. Electro-optic coefficient (r33) of copolymer was 62 pm/V for polymer 2 at 633 nm, and relaxation did not remarkably occur due to the formation of a crosslinked network at 200 ℃ for 15 min.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.12
• /
• pp.1167-1172
• /
• 1995

A coverage of about 1 μm-sized pores of a membrane filter by four monolayers of maleic acids copolymers and poly(allylamine) (PAA) was attained by Langmuir-Blodgett (LB) technique through a covalent cross-linking followed a polyion complexation at the air-water interface. The copolymers were prepared to have side chains of hydrocarbon tail, carboxyl, and/or oligoether in the repeat unit. The surface pressure-area isotherms showed that the monolayers on an aqueous PAA have more expanded area than on pure water. The monolayers were transferable on a calcium fluoride substrate and a fluorocarbon membrane filter as Y deposition type, and the resulting LB films were characterized by FT-IR spectroscopy and scanning electron microscopy. A polymer network produced through interchain amide formation was confirmed in as-deposited films. The films were heat-treated in order to complete the cross-linking. SEM observation of the heat-treated film on a porous membrane filter showed that the four layer film was sufficiently stable to cover the filter pore of about 1 μm. Immersion of the film in water or in chloroform did not cause any change in its appearance on SEM and in FT-IR spectra.

• Geomechanics and Engineering
• /
• v.12 no.5
• /
• pp.849-862
• /
• 2017

With growing interests in using bacterial biopolymers in geotechnical practices, identifying mechanical properties of soft gel-like biopolymers is important in predicting their efficacy in soil modification and treatment. As one of the promising candidates, dextran was found to be produced by Leuconostoc mesenteroides. The model bacteria utilize sucrose as working material and synthesize both soluble and insoluble dextran which forms a complex and inhomogeneous polymer network. However, the traditional rheometer has a limitation to capture in situ properties of inherently porous and inhomogeneous biopolymers. Therefore, we used the particle tracking microrheology to characterize the material properties of the dextran polymer. TEM images revealed a range of pore size mostly less than $20{\mu}m$, showing large pores > $2{\mu}m$ and small pores within the solid matrix whose sizes are less than $1{\mu}m$. Microrheology data showed two distinct regimes in the bacterial dextran, purely viscous pore region of soluble dextran and viscoelastic region of the solid part of insoluble dextran matrix. Diffusive beads represented the soluble dextran dissolved in an aqueous phase, of which viscosity was three times higher than the growth medium viscosity. The local properties of the insoluble dextran were extracted from the results of the minimally moving beads embedded in the dextran matrix or trapped in small pores. At high frequency (${\omega}>0.2Hz$), the insoluble dextran showed the elastic behavior with the storage modulus of ~0.1 Pa. As frequency decreased, the insoluble dextran matrix exhibited the viscoelastic behavior with the decreasing storage modulus in the range of ${\sim}0.1-10^{-3}Pa$ and the increasing loss modulus in the range of ${\sim}10^{-4}-1\;Pa$. The obtained results provide a compilation of frequency-dependent rheological or viscoelastic properties of soft gel-like porous biopolymers at the particular conditions where soil bacteria produce bacterial biopolymers in subsurface.