• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.70-72
• /
• 2004

The ferromagnetic pole piece of permanent magnet assembly for magnetic resonance imaging(MRI) is optimally designed to get high homogenious magnetic field, taking into account the non-linearity of the magnetic materials. In the design, the pole face is kept smooth and axis-symmetric by using B-spline parameterization, and nonlinear design sensitivity analysis is used for search direction.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.841-842
• /
• 2015

비접촉 선형 영구자석 기어는 직선 추력을 요구하는 반송 장치에서 모터의 회전운동을 직선 운동으로 변환하는 기계적인 변환 장치와 달리 마찰에 의한 손실과 소음 및 진동이 적고 윤활유와 유지 보수가 불필요하다는 장점을 가지고 있다. 하지만 물리적 접촉 방식을 사용하는 기계적인 변환장치에 비해 비접촉 방식을 사용하는 영구자석 기어는 상대적으로 낮은 전달추력능력을 가진다. 따라서 본 논문에서는 비접촉 선형 영구자석 기어의 양측 가동자 사이에서 추력을 전달하는 Pole Piece의 특성을 파악하고, Pole Piece형상의 제안 및 최적 설계를 통해 낮은 전달추력능력을 향상시키고자 한다.

• Tribology and Lubricants
• /
• v.14 no.3
• /
• pp.32-38
• /
• 1998

This paper presents the magnetic flux distributions of a ferrofluid seal at the sealing gap between the pole pieces and the rotating shaft. The optimized shape of pole pieces has been determined by using the computer simulations. The computed results indicate that the sloped pole piece of 27$^{\circ}$ shows good flux distributions compared with that of the conventional flat pole pieces and may reduce frictional heats due to a reduced surface contact areas of magnetic fluids.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.6
• /
• pp.1065-1070
• /
• 2017

Magnetic gears are magnetically coupled to the input side and the output side of the rotary machine to transmit power without mechanical contact. The magnetic gear consists of an inner rotor, an outer rotor and pole pieces. Torque ripple occurs due to the difference in reluctance between the two rotors and the pole pieces during power transmission. Torque ripple is a cause of the noise and vibration of the rotary machine, so it is necessary to minimize it. In this paper, we propose a shape that cuts the corner of the pole piece and apply a fillet to reduce torque ripple. We used a two-dimensional finite element analysis method to compare and analyze the torque ripple of the magnetic gears according to the change of the fillet parameters and to find the pole piece shape with excellent torque ripple.

• Journal of Biomedical Engineering Research
• /
• v.20 no.5
• /
• pp.537-544
• /
• 1999

자기공명영상시스템의 경사자계코일을 영구자석의 자극에 부착할 경우 경사자계의 분포가 변하고 코일의 인덕턴스가 증가하는 현상이 생긴다. 본 논문에서는 이러한 자극효과를 고려하여 평면형 경사자계코일을 설계하는 방법을 제시하였다. 제사한 방법에는 자극 효과를 거울 전류로 모델링하였고, 모델링한 거울 전류를 고려하여 경사자계코일의 인덕턴스를 최소화하는 방법을 구했다. 또한 실제 상황과 가장 흡사한 자계 분포를 만들어주는 거울 전류의 크기를 구하기 위해 유한요소법을 적용하였다. 제시한 방법으로는 설계된 경사자계코일은 종래의 설계된 경사자계 코일에 비해 우수한 성능을 보였다.

• The Journal of the Acoustical Society of Korea
• /
• v.37 no.5
• /
• pp.317-322
• /
• 2018

It has been generally known that a hole presenting on the center of pole piece for the loudspeaker can be very helpful for the heat, which is radiated by Joule Effect at the voice coil, to emit to the outside of the magnetic gap. The existence of hole can also become a cause of the changes of the acoustical properties about the loudspeaker. The resonance frequency of loudspeaker increased with the increase of hole radius. However, increasing the hole length resulted in the decrease of the resonance frequency. These results are in an excellent agreement with the theoretical predictions for the equivalent mechanical circuit of Bass-Reflex cabinet system. The acoustical property of the loudspeaker with hole can be also predicted by the theoretical interpretation of Bass-Reflex cabinet system.

• Journal of the Korean Magnetics Society
• /
• v.4 no.1
• /
• pp.56-61
• /
• 1994

Magnetic fluid is ferromagnetic material in liquid state, so the surface configuration of magnetic fluid affects the magnetic field, and vice versa. To analyze the devices with magnetic fluid, the magnetic field equations and hydrodynamic equation should be solved simultaneously. This paper presents the numerical algorithm to obtain the surface configuration of fluid under the influence of gravity, pressure and magnetic field without conventional sim¬plified assumption. The algorithm consists of nonlinear finite element method and ferro-hydrodynamics, such as Poisson equations and Bernoulli equations, respectively The simulated configurations of fluid are compared with experimental results, and the influence of the amount of fluid and pole piece shape on the seal capacities are analyzed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.777-778
• /
• 2011

본 논문에서는 높은 신뢰성과 긴 수명을 특징으로 하는 저가형 센서로 마그네틱 픽업코일 방식의 자기유도작용을 이용한 수동형 차륜 속도센서를 제작하여 그 특성을 분석하였다. 제작된 수동형 차륜 속도센서는 직접적인 유도 기전력을 감지하여 유도하는 Pole piece, 영구자석과 Bobbin역할을 하는 내피와 코일로 구성된 센서부, 세서를 보호하고 외부 노이즈를 제거하는 외피부, 그리고 센서를 보강 및 고정하기 위한 플랜지부로 구성된다. 제작된 센서를 기성품과 특성을 비교, 분석하였다.

• Proceedings of the Korean Magnestics Society Conference
• /
• 1993.11a
• /
• pp.72-73
• /
• 1993

• The Journal of the Korea institute of electronic communication sciences
• /
• v.19 no.1
• /
• pp.77-84
• /
• 2024

This paper introduces a study on an electromagnet magnetic gear designed for gear ratio conversion. In comparison to magnetic gears using permanent magnets, this electromagnet magnetic gear exhibits lower torque density, highlighting the need for torque density improvement. To address this, the research focuses on enhancing torque density by examining the consistent orientation of each rotor's magnetization during gear ratio conversion and attaching permanent magnets accordingly. However, an issue arises due to the uneven magnetic flux density caused by the non-uniform attachment of permanent magnets, leading to an increase in torque ripple. Therefore, building upon previous studies aimed at reducing torque ripple in electromagnet magnetic gears, this research explores the optimal methods, such as pole piece bridges and fillet configurations, to mitigate torque ripple even during gear ratio conversion.