• Journal of the Korean institute of surface engineering
• /
• v.27 no.4
• /
• pp.234-240
• /
• 1994

A large area impurity doping method for poly-Si TFT LCD has been developed. The advantage of this method is the doping of impurities into Si over a large area without mass separation and beam scanning. Phosphorus diluted in hydrogen was discharged by RF(13.56MHz) power and ions from discharged gas were accelerated by DC acceleration voltage and were implanted into deposited Si films. The annealing characteristic of this method was similar to that of the ion implantation method in the low doping concentration. Three mechanisms were evolved in the annealing characteristics of phosphorus doped Si films. Point defects annihilation and the retrogradation of dopant atoms at grain boundaries as a result of grain growth played a major role at low and high annealing temperature, respectively. However, due to the dopant segregation, the reverse annealing range existed at intermediate annealing temperature.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.182-183
• /
• 2006

$CuInSe_2$ single crystal thin films was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the hot wall epitaxy (HWE) system. The temperature dependence of the energy band gap of the $CuInSe_2$ obtained from the absorption spectra was well described by the Varshni's relation, $E_g(T)\;=\;1.1851\;eV\;-\;(8.99\;{\times}\;10^{-4}\;eV/K)T^2/(T\;+\;153K)$. After the as-grown $CuInSe_2$ single crystal thin films was annealed in Cu-, Se-, and In-atmospheres, the origin of point defects of $CuInSe_2$ single crystal thin films has been investigated by the photoluminescence(PL) at 10 K.

• Journal of Institute of Convergence Technology
• /
• v.3 no.2
• /
• pp.17-21
• /
• 2013

Hot cross wedge rolling process as an incremental forming has many advantages such as the material usage, the short process time, the automatic equipment line and the low forming load. However, it occurs some defects such as the surface groove, the axis warping and the Mannesmann hole. In this paper, the defect of the Mannesmann hole was carried out. Finite element analysis was utilized to reveal the stress distribution, the rotation of the specimen and the change of section profile. Cross wedge rolling experiment was also conducted on the generation of the Mannesmann hole. It was demonstrated according to the spreading angle with respect to the various types of material. In the view point of metal flow, the smaller forming angle and the larger spreading angle increase opportunities of the defect hole generations.

• Korean Journal of Metals and Materials
• /
• v.50 no.3
• /
• pp.233-236
• /
• 2012

ZnO nanowires were fabricated through thermal evaporation of Zn or ZnS powder using solar energy. The Zn or ZnS powder was heated and evaporated by sunlight. The sunlight was concentrated on the Zn or ZnS powder by a converging lens and then the Zn or ZnS powder was evaporated and oxidized in air. After oxidation, ZnO nanowires were fabricated in the focal point. Strong ultraviolet emission, which corresponds to the near band-edge emission, was observed from the ZnO nanowires synthesized using Zn powder as a source material. Meanwhile, green emission, related to intrinsic defects such as oxygen vacancies, prevailed for the ZnO nanowires fabricated using ZnS powder. No catalysts were used in the fabrication of the ZnO nanowires, which suggested the ZnO nanowires were grown by a vapor-solid mechanism.

• International journal of advanced smart convergence
• /
• v.8 no.3
• /
• pp.39-45
• /
• 2019

This paper presents an optical technique for the three-dimensional (3D) shape inspection of micro solder balls used in ball-grid array (BGA) packaging. The proposed technique uses an optical source composed of spatially arranged light-emitting diodes (LEDs) and the results are derived based on the specular reflection characteristics of the micro solder balls for BGA A vision system comprising a camera and LEDs is designed to capture the reflected images of multiple solder balls arranged arbitrarily on a tray and the locations of the LED point-light-source reflections in each ball are determined via image processing, for shape inspection. The proposed methodology aims to determine the presence of defects in 3D BGA shape using the statistical information of the relative positions of multiple BGA balls, which are included in the image. The presence of the BGA balls with large deviations in relative position imply the inconsistencies in their shape. Experiments were conducted to verify that the proposed method could be applied to inspection without sophisticated mechanism and productivity problem.

• Journal of the Korean Institute of Educational Facilities
• /
• v.28 no.1
• /
• pp.3-11
• /
• 2021

According to the Gyeonggi Provincial Office of Education's 2018 Education Statistics, there are 4,692 schools in Korea, and most of them were built before 1985 and the aging of facilities due to earthquake and external environment has reached a serious point and are vulnerable to safety. The Gyeonggi Provincial Office of Education designated 2,561 buildings with floor space of 1,000 square meters or more under the "Special Act on Safety and Maintenance of Facilities (2018.1.18. Full Revision)" and conducted regular safety inspections. The purpose of this study is to analyze the evaluation of school facilities according to the results of a regular safety inspection and to propose a maintenance plan for educational facilities for future defects according to the conditions of the facilities.

• Journal of the Korean institute of surface engineering
• /
• v.27 no.3
• /
• pp.123-133
• /
• 1994

Oxidation behavior of STS 304 and 430, produced by POSCO, Korea, was studied in order to study the surface defects formed during manufacturing processes. Oxidation experiments were carried out in a preheat-ed furnace at 850~$1, 250^{\circ}C$ in air and in a simulated coke oven gas(COG) atmosphere. The reaction products were examined by XRD, SEM and EDX on their surfaces and cross sections. Protective $Cr_2O_3$-primary oxide film was formed initially, but at critical point this film was broken and a duplex scale consisting of $Fe_2O_3$- and Fe$Cr_2O_4$- was formed. It was more severely attacked in a simulated COG atmosphere than in air, and STS 304 was superior to STS 430 in oxidation resistance.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.6 no.2
• /
• pp.8-16
• /
• 2015

Prestressed concrete (PSC) is a method in which prestressed tendon is placed inside and/or outside the reinforced concrete member and the compressive force applied to the concrete in advance to enhance the engineering properties of concrete member which is weak under tension. In this paper we suggested the precast PSC girder assembled with segments of portable size and weight at the factory. The segments of precast PSC girder will be delivered and assembled as a unit of PSC girder at the site. Consequently, we suggested new-type of precast segmented PSC girder with different shapes of segment cross-section (i.e., I-shape, Box-shape). To mitigate the problems associated with the field splice between the segments of precast PSC girder anchor system is attached near the neutral axis of the girder and relatively uniform compression throughout the girder cross-section is applied. Prior to the experimental investigation, analytical investigation on the structural behavior of precast PSC girder was performed and the serviceability (deflection) and safety (strength) of the girder were confirmed. In addition, 4-point bending test on the girder was conducted to investigate the structural performance under bending. From the experimental investigation, it was found that the precast PSC girder spliced with 3 and 5 segments has sufficient in serviceability and safety conditions and it was also observed that the point where the segments spliced has no defects and the girder behaves as a unit.

• Tribology and Lubricants
• /
• v.33 no.2
• /
• pp.45-51
• /
• 2017

Engine oil is a substance used for the lubrication of internal combustion systems. However, in some case, defects in engine systems may contaminate engine oil with fuel. Contaminated engine oil can cause problems in the normal functioning of a vehicle. In this study, we investigate the functional properties of engine oil contaminated with diesel fuel. The test results indicate that the engine oil contaminated with diesel fuel has low flash point, pour point, density, kinematic viscosity and cold cranking simulator value. The contaminated engine oil which has low plash point can cause fire and explosion accident. Furthermore, a four ball test indicates that the contaminated engine oil increases wear scar to poor lubricity. Moreover, we investigate the GC pattern using SIMDIST (simulated distillation) for determination of diesel in engine oil. The SIMDIST analytic result, diesel was detected at earlier retention time than engine oil in chromatogram. Thus the SIMDIST method can define whether engine oil is contaminated by diesel fuel or not. We can use the SIMDIST method for the diagnosis of oil condition instead of analyzing other physical properties that require many analytic instruments, large volume of oil sample and long analysis time.

• Journal of Broadcast Engineering
• /
• v.8 no.1
• /
• pp.63-71
• /
• 2003

In sport programs, real-time virtual imaging system come into notice for new technology which can compose information like team logos, scores. distances directly on playing ground, so it can compensate for the defects of general character generator. In order to synchronize graphics to camera movements, generally two method is used. One is for using sensors attached to camera moving axis and the other is for analyzing camera video itself. KBS technical research institute developed real-time sensor-based virtual imaging system 'VIVA', which uses four sensors on pan, tilt, zoom, focus axis and controls virtual graphic camera in three dimensional coordinates in real-time. In this paper, we introduce our system 'VIVA' and it's technology. For accurate camera tracking we calculated view-point movement occurred by zooming based on optical principal point variation data and we considered field of view variation not only by zoom but also by focus. We developed our system based on three dimensional graphic environment. so many useful three dimensional graphic techniques such as keyframe animation can be used. VIVA was successfully used both in Busan Asian Games and 2002 presidential election. We confirmed that it can be used not only in the field but also in the studio programs in which camera is used within more close range.