• 한국작물학회지
• /
• 제46권1호
• /
• pp.64-67
• /
• 2001

Snap bean is a new corp in Korea but believed to have a great deal of potentials for both domestic and overseas markets. The present study was performed to obtain the basic information about growth- and quality-related characteristics and to determinate the optimum seeding date and harvesting time for snap bean. Pod yield was significantly affected by seeding date. The highest pod yield was obtained from March 20 for determinate type and April 4 for indeterminate one, respectively, with the range of 13.0-23.7 t/ha. The pod length of indeterminate type was over 13cm, and the pod length was over 5 grams. The pod width for tested varieties was less than 1.0cm. Considering the pod growth characters such as pod length, pod width, and pod weight, the optimum harvesting time for immature pods of snap bean was supposed to be from 15 to 20 days after flowering. The daily yield of snap bean was begun to sharply increase from 15 days after the first flowering and the maximum yield was recorded at 30 days after flowering. For the accumulated yield, nearly 90% of total yield was obtained in 42 days after flowering.

• 수산해양교육연구
• /
• 제26권4호
• /
• pp.831-837
• /
• 2014

This paper focuses on the effects of the changes in the resistance characteristics caused by the changes of the POD shape installed in the Hydrofoil vessel, using the CFD(Computational Fluid Dynamics). We input the POD sections' basic shape as the origin of the x and y axis. Then as we cut the x-axis 0 to 2 cm, and the more we cut it, the total resistance value had increased. However, we have recognized the fact that as we cut the POD section, 3 to 5 cm, the resistance value had rather decreased. Furthermore we found out the result that as the cut partition was larger; the POD cross-section would decrease, resulting in the linear decrease of the viscous force.

• 산업기술연구
• /
• 제24권B호
• /
• pp.29-36
• /
• 2004

The wind and wind-induced dynamic wind pressures fluctuate irregularly according to time and space. In this study, the proper orthogonal decomposition(POD) technique is applied to wind pressures acting on a tall tower model, and the following results are found: the along-wind and across-wind forces can be reconstructed by only four dominant POD modes, and the reconstructed errors are 4.71% and 22%, respectively for across-wind and along-wind directions. The physical meanings for dominant modes are also presented in the paper. The POD analysis can compress complex wind pressure data only by a few dominant modes and interpret spatio-temporal characteristics of wind pressure by novel way while existing statistical methods do not have such benefits.

• Journal of Ship and Ocean Technology
• /
• 제9권1호
• /
• pp.1-10
• /
• 2005

The procedures of model test and performance prediction for the CRP-POD propulsion ships, are studied. At the CRP-POD system, which are highly applicable to ultra large container carriers, RPM ratio of two propellers is not fixed, unlike conventional CRP system, and hence the power of each propeller must be predicted respectively. In this paper, a CRP-POD system is designed for 10,000 TEU class ultra large container carriers, and the characteristics of the CRP-POD system are experimentally studied. Finally, based on this study, the procedure of powering performance evaluation for CRP-POD propulsion ships is suggested. However, further studies on quantitative correction of the present procedure are required.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.424-429
• /
• 2013

The trolley carrying the pod moves along by the airfield runway. The pod through the trolley are subjected to vibration arising from the ground state, the precision optical components in the pod can have a significant impact. The road tests were conducted by using the measurement pod to remove the risk for the project. The measurement pod was composed with the ACRA, sensors, battery. The accelerometers were attached to get the acceleration through the road condition. The PSD envelop was calculated by FFT from the acceleration. The driving safety was proven through comparing the measurement data and MIL-STD-810G specification.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 추계학술대회 논문집
• /
• pp.72-77
• /
• 2011

In this study, the natural frequencies and mode shape of an external mounting pod were verified using the modal analysis and modal testing technique for a pod mounted on an aircraft. The procedure associated with the FEM building of an external mounted pod to predict the dynamic behavior of aircraft structures is described. The simplified FEM reflecting the results of the modal testing of a pod is built through the optimization, applied to the structural dynamic model of an Aircraft, used to verified the stability of vibration and flutter of an aircraft.

• 한국항공우주학회지
• /
• 제42권5호
• /
• pp.383-389
• /
• 2014

하이브리드 로켓 연소실 내부 유동장에 대한 수치계산 결과에 POD기법을 적용하였다. 특히, 다이어프램 설치에 따른 유동모드 변화를 분석하여, 연소특성에 미치는 영향을 해석하였다. 또한, 다이어프램이 있는 연소실에서 표면 분출유동의 유무에 따른 POD를 적용하여 분출유동이 연소실 내부 유동특성에 미치는 영향을 판단하였다. 10개의 모드를 사용하여 기본형상에 대한 POD 결과를 살펴보면 주 유동을 나타내는 모드 1과 벽면 근처의 작은 크기 유동인 2-9 모드 사이의 구분이 분명하게 나타났다. 다이어프램을 설치한 형상의 POD 결과, 모드 2부터 5의 에너지가 증가하였는데 이것은 다이어프램 주변 순환영역에서 생성되는 유동 때문인 것으로 보인다. 한편, 다이어프램 주위 영역의 유동특성을 보여주는 모드 2-5와 후류 벽면의 유동특성을 보여주는 모드 6-9의 에너지 분포가 분출유동 유무에 관계없이 비슷한 특성을 나타냈다. 따라서 연소율이 다이어프램 근처에만 국부적으로 증가하는 이유는 다이어프램 후류에 형성되는 비교적 큰 크기의 유동모드 2-5의 에너지가 증가되었기 때문인 것으로 분석된다.

• 한국작물학회지
• /
• 제45권2호
• /
• pp.93-96
• /
• 2000

The present study was performed to obtain the basic information about growth and quality related characteristics and optimum harvesting time for podedible pea which is a new crop in Korea but believed to have a great deal of potentials for both domestic and overseas markets. They can be consumed either as a fresh succulent vegetable or as tender green pods. The daily green pod yield of pod-edible peas started to increase from ten days after flowering and the maximum yield was recorded on 26 days after flowering. Ninety percent of pod yields could be harvested from 16 to 36 days after flowering. Mean green pod yield for the tested varieties was approximately 8.0 t/ha. Total vitamin C content of pod-edible peas showed continuously decreasing trends from five days after flowering. The highest sucrose content was obtained at ten days after flowering. The highest panel score based on sweetness, chewiness, and hardness for the processed green pods was shown at 10-15 days after flowering in all varieties tested, indicating that the optimum harvesting time for pod-edible peas was considered to be 10-15 days after flowering.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권9호
• /
• pp.1106-1111
• /
• 2014

본 연구는 Hydrofoil 선박용 POD의 형상변화에 따른 압력분포 특성을 파악하기 위하여 CFD기법을 적용하여 수행하였다. POD 단면의 기본형상을 원점(상단)으로 하여 x축 방향으로 0cm(원본형상)에서 8cm까지 절단했을 때, 점성저항은 조금씩 감소하였으나, 압력저항은 조금씩 증가하는 결과를 얻었다. 하지만 동일한 조건하에서 9cm를 절단했을 경우에는 점성저항은 증가하고, 압력저항은 감소하는 경향을 보였다. 결론적으로, 압력저항이 점성저항에 비해 POD형상의 압력분포 특성에 많은 영향을 미친다는 것과 9cm를 절단한 근처에서 전체저항이 감소한다는 결론을 얻었다.

• 대한조선학회논문집
• /
• 제50권6호
• /
• pp.429-435
• /
• 2013

Recently, to improve the safety and maneuverability at fairway around harbor the POD system has been equipped on a ship. And the interest about maneuvering characteristics of a cruise ship has been increasing. In this paper the mathematical model of maneuvering motion of a cruise ship with twin POD system in general speed and slow speed are presented. And the maneuvering coefficients of mathematical model are obtained from the captive model tests using CPMC(Computerized Planar Motion Carriage). Computer simulation using mathematical model in general speed and slow speed are carried out and compared with the results of free running model test with the same model ship. The differences between the mathematical models are compared and discussed. In this paper the mathematical models, the results of captive model test and simulation results are presented.