• Journal of Korean Society of Forest Science
• /
• v.35 no.1
• /
• pp.47-55
• /
• 1977

As the development of national lands increase, the necessity to develop less favorable terrain also increases. It also becomes more difficult and complicated to provide access that is both economical and safe from contributing to soil erosion on roadsides and to londscape damages. Because of the increased and justified emphasis upon environmental degradation, proper stabilization of the cut-and bank slopes of roadsides, plant sites and building sites in Korea requires careful planning as well as execution of the constructions. All fill slopes should be compacted to a degree consistent with design standards and material properties. Drainage facilities should be provided to prevent damaging concentrations of surface runoff and to avoid high pore pressures in cuts and fills. All surfaces of cut-fill slopes should be revegetated with suitable species as soon as possible after construction. To stabilize the cut-fill slopes of highway roadsides should be considerded the factor of stabilization as well as landscape conservation especially. Such basic influences as the effects of vegetations on water balance of rain fall, on the control of surface erosion and on the surface slope failures are briefly discussed in the report.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.4
• /
• pp.211-218
• /
• 2018

Recently, various technologies related to IIoT are introduced continuously due to the spread of IoT and smart factory industries. This paper proposes the construction of a two-way wireless network system for monitoring plant equipment using these various technologies. The main technologies used in this thesis are design techniques for micro sensor nodes to monitor facility conditions at various sites, MQTT technology for wireless communication between local server and sensor nodes and Node-RED based design technologies, which store data collected and can be easily presented to users via wired and wireless wires. In addition, a wireless two-way camera system was also implemented in which the screen images of the site can be viewed in the situation room according to the instructions of the situation room when determining abnormal conditions.

• Journal of the Korean housing association
• /
• v.19 no.6
• /
• pp.157-166
• /
• 2008

Until 1960, the major housing type of rural area in Korea was traditional wooden frame building, which was made of natural materials. In the course of modernization and New Village Movement, most of traditional houses have been renovated focusing on changing roof material of rice straw into slate, keeping existing main wooden structure. And then from around 1980, by economical development the new houses have been constructed. On these three phases of traditional type, remodeling type and new construction type, the natural materials of housing facade as wood, soil, stone and plant changed into artificial materials as cement, chemical material and paint. At the same time the exterior color of housing also have been changed and varied. The purpose of this thesis is to find out the changing aspect of exterior color by comparing remodeled and new constructed housing with of traditional housing. The exterior color of one hundred and fifty seven houses were surveyed and the three color attributes of each part of facade, as roof, wall and window, were analyzed and compared. In case of traditional houses, 98.3% of color are concentrated on the warm color of Y and YR on HUE scale, and 88% of their color are low Chroma. And Value of their color has been varied and spreaded from low to high Value scale. From traditional types to remodeled and new constructed houses, the concentration ratio of warm color on Hue scale reduced from 98.3% to 68.7% and ratio of low Chroma was also changed from 88% to 73.2% and the ratio of low Value color reduced from 51.9% to 29.7%. The exterior color of houses in rural area varied on Hue, and the more saturated colors were used and they became brighter compared with color of traditional houses. It is expected that the results of this study can be used for basic data of exterior color planning and improvement into harmonized color with natural environment.

• Journal of Hydrogen and New Energy
• /
• v.25 no.1
• /
• pp.97-104
• /
• 2014

In a coal gasifier for IGCC, hot syngas leaving the gasifier at about 1550oC is rapidly quenched by cold syngas recycled from the gas cleaning process. This study investigated the flow and heat transfer characteristics in the gas quench system of a commercial IGCC process plant under different operating pressures. As the operating pressure increased from 30 bar to 50 bar, the reduced gas velocity shortened the hot syngas core. The hot fly slag particles were retained within the core more effectively, and the heat transfer became more intensive around the hot gas core under higher pressures. Despite the high particle concentrations, the wall erosion by particle impaction was estimated not significant. However, large particles became more stagnant in the transfer duct due to the reduced gas velocity and drag force under higher pressures.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.3
• /
• pp.639-648
• /
• 2015

SInce 2000, Instrumentation and Control(I&C) systems of Nuclear Power Plant(NPP) based on analog technology began to be applied to the digital technology. NPPs under construction in the country with domestic APR1400 I&C system, most devices were digitalized. Cyber security of NPP I&C systems has emerged as an important issue because digital devices compared to the existing analog equipment are vulnerable to cyber attacks. In this paper, We proposed the risk rating process of cyber security threats in NPP I&C system and applied the proposed process to the Reactor Protection System(RPS) developed through Korea Nuclear Instrumentation & Control System(KINCS) project for evaluating the risk of cyber security threats.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.32-33
• /
• 2018

낙동강 하구의 지형변화를 포함한 제 해양환경은 낙동강 하굿둑이 건설된 1987년 7월 이후로 분기된다. 즉, 낙동강 하굿둑이 건설되기 전에는 낙동강의 작은 하상구배로 담수와 해수가 혼합되는 구역이 현재의 하굿둑 보다 상류에 위치하였으나 하굿둑 건설 이후에는 하굿둑 수문 조작에 따라 방류되는 유출수에 의해 유동 양상이 변화되기에, 낙동강 하굿둑의 방류량을 파악하는 것은 매우 중요하다 하겠다. 이에 본 연구에서는 낙동강 하굿둑 제원, 방류패턴, 하굿둑 주변 강수량, 하굿둑 방류량을 분석하였다. 또한, 낙동강 하굿둑 방류량에 의한 유사량 분석을 수행하여, 낙동강 하류역의 지형변동의 기초자료를 제공하였다. 연구결과, 낙동강 하굿둑 방류량은 최근 13년 동안의 연평균방류량은 $19,274.56{\times}106m^3$이고 일평균 방류량은 $52.81{\times}106m^3$이고 초당평균 방류량은 $611.19m^3$으로 산정되었다. 낙동강 하굿둑 건설 이후 퇴사량과 준설량을 근거하여 계산된 연간 평균 총유사량은 $3,184,405m^3/yr$이고, 낙동강 하굿둑의 경우 연평균 부유사량이 $3,153,995m^3/yr$, 소류사량이 $30,410m^3/yr$이며 소유사량이 부유사량의 약 1.0%로 나타났다.

• Plant Journal
• /
• v.8 no.4
• /
• pp.40-44
• /
• 2012

The pre-treatment of natural gas to remove $H_2S$ and $CO_2$ before liquefaction in natural gas processing is required, and amine-based absorption processes are widely used in gas processing. The current study aims to model amine-based absorption process and to find cost-effective design through systematic analysis of energy systems, together with column design. Different design options for absorber and stripper are investigated in a holistic manner, and heat integration technique has been applied to investigate how design of columns is interacted with energy efficiency for the pre-treatment process considered. Case study has been presented to demonstrate the applicability of heat integration method for improving energy efficiency in practice.

• Plant Journal
• /
• v.14 no.2
• /
• pp.45-50
• /
• 2018

Nuclear safety law's amendment caused many problems to use radiography testing(RT). Phased array ultrasonic testing(PAUT) was adapted instead of RT for NDE of welding points in boiler tubes these days. Unfortunately, PAUT doesn't give us the discrimination characteristics about flaws distinction and flaws size clearly. In this thesis, the distinction characteristics of flaw types and the detection characteristics of flaw size using PAUT of welding points in boiler tubes were analyzed. It was concluded that PAUT can distinguish between planar flaws and rounded flaws, but it is hard to tell apart the types of flaw respectively. We paid attention to the discrimination of flaws size because PAUT tends to underestimate the flaw size of porosity and underestimate or overestimate the flaw size of porosity.

• Korean Journal of Agricultural Science
• /
• v.47 no.2
• /
• pp.263-273
• /
• 2020

With the change of the agricultural environment (increased rice production, decreased rice consumption, and rice production policies), converting paddy fields into upland fields is an increasing trend. In terms of conversion into upland fields, subsurface drainage is one of the most important factors for good field crop growth. This study evaluates the performance of a subsurface drainage culvert system in paddy fields and reclaimed lands. The obtained results are briefly summarized as follows: 1) After a comparative evaluation of several subsurface drainage culvert systems, including excavated subsurface drainage and non-excavated subsurface drainage types, type 3 (non-excavated, perforated drain pipe 50 mm, filter mat B50 cm, subsoiling 70 cm and culvert spacing 5 m) shows relatively high values among four types in terms of effectiveness (subsurface discharge capability) and economic efficiency (construction cost). 2) Type 3 has proven that it is suitable for design standards of discharge capacity through field tests performed in paddy fields (three sites: Gong-geom, Gae-san, Juk-san) and reclaimed lands (two sites: Gum-ho, Mi-am). 3) In the experiment of Sesamum indicum growth according to the existence of a drainage system, Sesamum indicum growth with a subsurface drainage culvert system had good value in terms of plant shoot and root length, shoot fresh and dry weight, and root fresh and dry weight).

• Plant Journal
• /
• v.14 no.1
• /
• pp.34-41
• /
• 2018

Current study is the era of fusion, and future study is the era of integration. The prerequisite of study integration is that all studies must be equal to each other, and only laws derived from natural laws can achieve the equivalence of integration. We suggest that the ability to make change is defined as energy. All things change, the change necessarily has directionality, therefore change and directionality apply equally to all studies. The zeroth law of integral studies is the law of existence, the first law is the law of change conservation, the second law is the law of increasing non-available change, the third law is the law of the guidelines, and the fourth law is the law of fusion. The above laws are very similar to the law of thermodynamics. The ultimate aim of the five integral laws is the realization of a community in which natural, human, and AI individuals cooperate and develop each other on the earth.