Journal of Hydrogen and New Energy (한국수소및신에너지학회논문집)

The Korean Hydrogen and New Energy Society (한국수소및신에너지학회)
권호 표지
DOI QR코드

DOI QR Code

Effect of Operating Pressure on the Heat Transfer and Particle Flow Characteristics in the Syngas Quench System of an IGCC Process

IGCC 합성가스 급속 냉각시스템의 운전 압력에 따른 열유동 및 입자 거동 특성 연구

  • Park, Sangbin (School of Mechanical Engineering, Sungkyunkwan University) ;
  • Yang, Joohyang (School of Mechanical Engineering, Sungkyunkwan University) ;
  • Oh, Junho (School of Mechanical Engineering, Sungkyunkwan University) ;
  • Ye, In-Soo (School of Mechanical Engineering, Sungkyunkwan University) ;
  • Ryu, Changkook (School of Mechanical Engineering, Sungkyunkwan University) ;
  • Park, Sung Ku (Coal Conversion System Development Team, Corporate R&D Institute, Doosan Heavy Industries & Construction)
  • 박상빈 (성균관대학교 기계공학부) ;
  • 양주향 (성균관대학교 기계공학부) ;
  • 오준호 (성균관대학교 기계공학부) ;
  • 예인수 (성균관대학교 기계공학부) ;
  • 류창국 (성균관대학교 기계공학부) ;
  • 박성구 (두산중공업 석탄 전환 시스템 개발팀)
  • Received : 2013.12.02
  • Accepted : 2014.02.28
  • Published : 2014.02.28
Download PDF
⟨ Previous Next ⟩

Abstract

In a coal gasifier for IGCC, hot syngas leaving the gasifier at about 1550oC is rapidly quenched by cold syngas recycled from the gas cleaning process. This study investigated the flow and heat transfer characteristics in the gas quench system of a commercial IGCC process plant under different operating pressures. As the operating pressure increased from 30 bar to 50 bar, the reduced gas velocity shortened the hot syngas core. The hot fly slag particles were retained within the core more effectively, and the heat transfer became more intensive around the hot gas core under higher pressures. Despite the high particle concentrations, the wall erosion by particle impaction was estimated not significant. However, large particles became more stagnant in the transfer duct due to the reduced gas velocity and drag force under higher pressures.

Keywords

References

  1. C. Higman, M. Van Der Burgt, "Gasification", Gulf Professional Publishing, USA, 2008.
  2. J. Ahn, T. Kim, "Influence of Oxygen Supply Method on the Performance of IGCC plants", Trans. of the Korean Hydrogen and New Energy Society, Vol. 23, 2012, pp. 264-273. https://doi.org/10.7316/KHNES.2012.23.3.264
  3. G. J. Stigel, R. C. Maxwell, "Gasification Technologies: The Path to Clean, Affordable Energy in the 21st century", Fuel Processing Technology, Vol. 71, 2001, pp. 79-97. https://doi.org/10.1016/S0378-3820(01)00138-2
  4. L. D. Smooth, P. J. Smith, "Coal Combustion and Gasification", Plenum Press, 1985, pp. 163-210.
  5. R. Hotchkiss, "Coal Gasification Technologies", Journal of Power and Energy, Vol. 217, 2003, pp. 27-33. https://doi.org/10.1243/095765003321148664
  6. J. Lee, Y. Yoo, Y. Yun, "Research and Development & Commercial Development Status for Coal Gasification Technology-mainly from GTC 2010", Journal of Energy Engineering, Vol. 20, 2011, pp. 123-142. https://doi.org/10.5855/ENERGY.2011.20.2.123
  7. J. Lee, M. Kim, J. Chi, S. Kim, S. Park, "A Study of Coal Gasification Process Modeling", Trans. of the Korean Hydrogen and New Energy Society, Vol. 21, 2010, pp. 425-434.
  8. J. Lee, U. Kim, K. Ko, J. Chung, J. Hong, "Comparison of Quench Methods in the Coal Gasification System with Carbon Capture", Trans of Korean Hydrogen and New Energy Society, Vol. 33, 2012, pp. 285-292. https://doi.org/10.7316/KHNES.2012.23.3.285
  9. J. Lee, Y. Joo, J. Chung, S. Park, U. Kim, "The Gasifier Operation Method using Biogas", Trans of Korean Hydrogen and New Energy Society, Vol. 24, 2013, pp. 249-254. https://doi.org/10.7316/KHNES.2013.24.3.249
  10. D. A. Bell, B. F. Towler, M. Fan, "Coal Gasification and Its Application", William Andrew, USA, 2011.
  11. M. Kim, Y. Joo, I. Choi, J. Lee, "The Process Simulation of Entrained Flow Coal Gasification in Dynamic State for 300MW IGCC", Trans of Korean Hydrogen and New Energy Society, Vol. 21. 2010. pp. 460-469.
  12. I-S. Ye, S. Park, C. Ryu, S. K. Park, "Flow and Heat Transfer Characteristics in the Syngas Quench System of a 300MWe IGCC Process", Applied Thermal Engineering, Vol. 58, 2013, pp.11-21. https://doi.org/10.1016/j.applthermaleng.2013.04.006
  13. K. C. Mills, J. M. Rhine, "The Measurement and Estimation of the Physical Properties of Slag formed during Coal Gasification: 2. Properties relevant to Heat-transfer", Fuel, Vol. 68, 1989, pp. 904-910. https://doi.org/10.1016/0016-2361(89)90128-2
  14. R. Siegel, J. R. Howell, "Thermal radiation Heat transfer", Hemisphere, USA, 1992.
  15. B. D. Bowen, M. Fournier, J. R. Grace, "Heat Transfer in Membrane Waterwalls", Heat Mass Transfer, Vol. 34, 1991, pp. 1043-1057. https://doi.org/10.1016/0017-9310(91)90015-7
  16. J. G. Mbabazi, T. J. Sheer, R. Shandu, "A Model to predict Erosion on Mild Steel Surfaces Impacted by Boiler Fly Ash Particles", Wear, Vol. 257, 2004, pp. 612-624. https://doi.org/10.1016/j.wear.2004.03.007
  17. S. Park, I-S. Ye, J. Oh, C. Ryu, S. K. Park, "Flow and Heat Transfer Characteristics in the Gas Reversing Chamber of Syngas Cooler for 300MWe IGCC Process", Applied Thermal Engineering, (Submitted).
  18. S. A. Berber, L. Talbot, L. S. Yao, "Flow in Curved Pipes", Annual Review of Fluid Mechanics, Vol. 15, 1983, pp.461-512. https://doi.org/10.1146/annurev.fl.15.010183.002333