• 한국전자파학회논문지
• /
• 제21권12호
• /
• pp.1454-1459
• /
• 2010

본 논문에서는 Bell 연구소와 IEC 61000-2-9 기준에 제시된 HEMP 파형이 무한 도체 평판의 개구에 입사할 때, 개구로 침투하는 침투 전계 특성을 비교 검토하고 있다. 이론 해석으로는 HEMP의 전계 분포를 가정한 상태에서 도체 평판의 개구에 생성되는 전계 분포에 관한 적분 방정식을 유도하여 Galerkin의 모멘트 법으로 해석하였다. 이론 해석 결과, IEC 61000-2-9 기준이 Bell 연구소의 기준보다 낮은 주파수 대역을 제외하고 침투 전계는 크지만, 침투 전계의 주파수 특성 경향은 거의 동일하다는 것을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 춘계학술대회 논문집
• /
• pp.59-60
• /
• 2009

The conventional in-plane field driven-vertical alignment display (VA-IPS) shows fast response time but transmittance shows very low and operating voltage is very high. In this paper, we studies electro-optical properties of the novel in-plane field driven vertical alignment device which has two transistors on array part and common electrode on CF substrate with dielectric layer. The device shows fast response time and high transmittance.

• 한국지구과학회지
• /
• 제29권5호
• /
• pp.437-445
• /
• 2008

We analyzed fault plane solutions of the recent twenty-two earthquakes which occurred from 2004 to 2006 in the central part of the Korean Peninsula by using P- and S-wave polarities along with SH/P amplitude ratios. The fault plane solution shows that strike-slip fault is dominant here, especially for the events with local magnitude equal to or greater than 3.0. However, some events with local magnitude less than 3.0 show normal fault or strike-slip fault with normal components. In the case of strike-slip fault, its orientation is almost in the direction of NNE-SSW to NE-SW almost parallel to the general trend of faults, while the compressional axis of the stress field trends ENE to E-W. The result is almost consistent with the stress field in and around the Korean peninsula, as reported previously. We cannot give any appropriate explanations to the normal faulting events along the western offshore and inland areas whether it is related to the local stress changes or tectonically unidentified extensional structures. Thus, an extension of investigations is desirable to clarify the cause of such phenomena.

• 한국음향학회지
• /
• 제34권6호
• /
• pp.493-498
• /
• 2015

물로 채워진 음향 펄스 튜브 내에는 가진 조건들에 따라 복잡한 형태의 음향 신호들이 형성될 수 있다. 이는 펄스 튜브를 이용해 저주파수 대역에서 평면파 반사계수를 측정하는 것을 어렵게 한다. 본 연구에서는 COMSOL Multiphysics를 이용하여 튜브 벽이 가진되는 경우 펄스 튜브 내에 평면파 뿐 아니라 비평면파 모우드의 복잡한 음장이 발생됨을 보였다. 모우드 분리 방법인 이차원 푸리에 필터링으로 입사 또는 반사하는 평면파 모우드만을 각각 분리할 수 있었다. 이에 시간 게이팅을 적용하므로 음향 시편의 평면파 반사계수를 보다 정확하게 결정할 수 있게 하였다.

• 지구물리
• /
• 제3권4호
• /
• pp.245-250
• /
• 2000

P, S파 극성 및 진폭비를 이용하여 1997년 6월 26일 경주지진의 단층면해를 구하였다. 그 결과, 절단면의 주향, 경사, 면선각이 $150{\pm}4^{\circ}\;,\;63{\pm}6^{\circ}\;,\;65{\pm}7^{\circ}$ 또는 $18{\pm}12^{\circ}\;,\;26{\pm}3^{\pm}\;,\;120{\pm}5^{\circ}$ 라는 값에서 주향이동이 포함된 역단층성의 단층면이 도출되었다. 동북동-서남서 방향의 주 압축응력을 시사하는 본 연구결과의 단층면해는 저주파 기록을 역산하여 얻은 결과와 거의 일치하며, 양산단층 일대의 미소지진을 복합단층면해에 의해 도출한 결과와도 일치한다.

• 비파괴검사학회지
• /
• 제27권6호
• /
• pp.563-575
• /
• 2007

This contribution contained the classical work of an open-hole tensile plate to demonstrate the performance of grating shearography and to compare with the results obtained by other full-field measurement techniques, The isotropic plate with an open-hole has often appeared in the previous contributions introducing novel full-field method and system. Grating shearography directly provided six quantitative measurands about the specimen's surface kinematics by using a single measurement set: three in-plane strains, in plane rotation, and two out-of-plane slopes. The quasi-plane wavefront of grating metrology led to high signal-to-noise ratio (SNR) and thus neither fitting nor filtering was applied, and the small shearing distance of $101{\mu}m$ could be used. The small shearing distance provided the outstanding spatial resolution of $80{\mu}m$ and sensitivity appropriate for experimental mechanics. Finally, the grating shearography enabled the visualization of the complex surface deformation around the hole and also detected parasitic flexions of the specimen in the micrometer regime during the tensile test.

• Structural Engineering and Mechanics
• /
• 제81권3호
• /
• pp.379-394
• /
• 2022

Shallow footings usually belonged to the category of thick plate structures. For accurate analysis of thick plates, the contribution of out-of-plane components of the stress tensor should be considered in the formulation. Most of the available shallow footing models are based on the classical plate theories, which usually neglect the effects of the out-of-plane stresses. In this study, a mixed-field plate finite element model (FEM) is developed for the analysis of shallow footings rested on soil foundations. In addition to displacement field variables, the out-of-plane components of the stress tensor are also assumed as a priori unknown variables. For modeling the interaction effect of the soil under and outside of the shallow footings, the modified Vlasov theory is used. The tensionless nature of the supporting soil foundation is taken into account by adopting an incremental, iterative procedure. The equality requirement of displacements at the interface between the shallow footing and soil is fulfilled using the penalty approach. For validation of the present mixed FEM, the obtained results are compared with the results of 3D FEM and previous results published in the literature. The comparisons show the present mixed FEM is an efficient and accurate tool for solving the problems of shallow footings rested on subsoil.

• 조명전기설비학회논문지
• /
• 제16권4호
• /
• pp.73-79
• /
• 2002

본 논문는 공기중 교류전압원을 이용하여 3종류의 전극부(침대평판전극, 평판대평판전극 및 구대평판전극부)에서 방전시 방사되는 방사전자파를 측정하고, 그 스펙트럼의 특이한 패턴을 나타냈다. 방사전자파의 측정은 스펙트럼분석기와 바이코니칼 안테나를 사용하여 VHF(30~230[MHz])대역에서 측정하였다. 방전개시전압영역일 때, 침대평판전극부인 경우에는 주파수 45, 70, 80[MHz] 대역에서, 평판대평판전극과 구대평판전극부인 경우에는 주파수40[MHz]에서 높은 전계강도를 나타내었다. 그러나 절연파괴전압영역일 때, 방사전자파의 주파수 스펙트럼분포는 전극의 형태에 따라 측정주파수 영역에서 차이를 나타내었다.

• 대한수학회보
• /
• 제54권5호
• /
• pp.1859-1871
• /
• 2017

We compute the Jordan constant for the group of birational automorphisms of a projective plane ${\mathbb{P}}^2_{\mathbb{k}}$, where ${\mathbb{k}}$ is either an algebraically closed field of characteristic 0, or the field of real numbers, or the field of rational numbers.

• 소성∙가공
• /
• 제7권2호
• /
• pp.177-185
• /
• 1998

The kinematically admissible veolcity field is developed for the shapes of dead metal zone and the curving velocity distribution in the eccentric plane dies extrusion. The shape of dead metal zone is defined as the boundary surface with the maximum friction constant between the deformable zone and the rigid zone. The curving phenomenon in the eccentric lane dies is caused by the eccentricity of plane dies. The axial velocity distribution in the plane dies is divided in to the uniform velocity and the deviated velocity. The deviated velocity is linearly changed with the distance from the center of cross-section of the workpiece. The results show that the curvature of products and the shapes of the dead metal one are determined by the minimization of the plastic work and that the curvature of the extruded products increase with the eccentricity.