• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.885-888
• /
• 2008

본 연구에서는 도로공사의 교량 구조물 적용에 적합한 고성능 콘크리트의 배합도출을 목적으로 고로슬래그미분말을 사용한 고성능 콘크리트의 기초 물성을 평가하였다. 굳지않은 콘크리트의 유동성은 W/B에 상관없이 고로슬래그 미분말의 혼입율이 증가할수록 목표 슬럼프플로우를 만족시키기 위한 고성능감수제의 첨가율은 저하되는 것으로 나타났으며, 목표 공기량을 만족시키기 위한 AE제의 첨가량의 변화는 Plain 콘크리트와 동등한 것으로 나타났다. 고로슬래그 미분말의 경우 높은 혼입율로 인하여 수화반응이 지연되기 때문에 최고온도가 약 10시간 후에 도달되는 것으로 나타났으며, 혼입율 증가에 따른 단열 상승온도는 혼입율 45%까지 수화열 저감효과가 작게 나타났으나 혼입율 60%에서는 수화열이 약 $8^{\circ}C$가량 저감되었다. 이는 수화열이 작은 고로슬래그 미분말의 분량이 많아진 것에 기인된 것으로 사료된다. 압축강도 특성은 W/B=26, 30%에서는 고로슬래그 미분말 혼입율이 증가할수록 압축강도가 Plain 콘크리트에 비하여 약 10MPa가량 크게 증가되는 것으로 나타났지만, W/B=34%에서는 압축강도가 Plain 콘크리트와 거의 같은 수준으로 나타남으로써, 낮은 물결합재비에서 고로슬래그 미분말을 사용할 경우 압축강도 증진에 효과가 있는 것으로 사료된다.

• 한국토양비료학회지
• /
• 제43권3호
• /
• pp.315-321
• /
• 2010

시설재배는 폐쇄된 환경에서 제한적인 물관리로 인하여 작기 중에는 외부에 영향을 미치지 않으나, 작물 생산 이후 토양 중 집적된 염류를 제거하기 위해 담수처리를 하게 되는데, 이 때 토양 중 염류가 지표유출 및 용탈을 통하여 주변 수질에 영향을 직접 미치고 있어서 이에 대한 정량적인 평가를 하였다. 입지조건이 다른 두 시설재배지인 경북 상주시 서곡동에 위치한 시설하우스에서 2008년 7월 중순부터 9월 중순까지 시험 전 후의 토양 화학성, 관개량 및 관개수질, 침투수량 및 침투수질, 표면수질, 그리고 조사기간 동안 주변 하천 수질을 조사하였다. 하성평탄지에서는 담수직후의 제염률은 60.4%로 곡간지에 비해 훨씬 높았으며 76.6%까지 높아졌다가 담수 20일 후에는 66.7%이었다. 담수초기부터 곡간지의 표면수중 $NH_4$-N과 $PO_4$-P 농도가 하성평탄지보다 높았으며, 곡간지에서 담수직후와 담수종료 후의 토양깊이별 $Cl^-$과 ${SO_4}^{2-}$ 농도는 큰 차이가 있었으나, 하성평탄지에서는 토양깊이별 ${SO_4}^{2-}$ 농도만 차이가 있었다. 침투수중 $NO_3$-N 농도 변화는 곡간지에 비해 하성평탄지에서 변화의 폭이 컸으며, 시간이 경과할수록 그리고 토양이 깊어질수록 그 농도도 높았다. 또한, 곡간지와 하성평탄지에 있는 시설재배지에서 담수제염에 의한 질소와 인수지를 비교 평가해 본 결과 곡간지와 하성평탄지 모두 유입 부하량보다 유출 부하량이 많아 외부 수계의 영향을 주는 것으로 평가되었다. 특히, 곡간지에 비해 하성평탄지에서의 양분 부하량이 더 많은 것으로 평가되었는데, 곡간지에서는 지하용탈만으로 제염을 하여 지하수의 수질에 영향을 주고 하성평탄지에서는 지하용탈뿐만 아니라 지표용탈에 의한 제염으로 인해 하천수의 수질에 영향을 주는 것으로 평가되었다.

• 한국환경과학회지
• /
• 제21권10호
• /
• pp.1171-1179
• /
• 2012

Headwaters initiate material export to downstream environments. A nested headwater study examined the flux of dissolved constituents and water from a perennial stream and four ephemeral/intermittent streams in the Upper Gulf Coastal Plain of Mississippi. Water was collected during storm and baseflow conditions. Multiple linear regression was used to model constituent concentration and calculate flux. Event was the major source of water discharged from the ephemeral and intermittent streams however, baseflow was the major source for water discharged by the perennial stream during events. The perennial stream had an area weighted average yields of 10.1, 0.01, 1.03, 0.65 kg/ha/yr of DON (dissolved organic nitrogen), $NO_3^-$-N, $NH_4^+$-N and $PO_4^{-3}$, respectively while large variabilities existed between the ephemeral and intermittent streams. These findings highlight the importance of headwaters in protecting the low order drainage basins as a key to water quality within perennial streams.

• Journal of Nutrition and Health
• /
• 제50권2호
• /
• pp.121-132
• /
• 2017

Purpose: This review was performed to establish a reference intake of water for Korean (KDRI-water) adults in 2015 by examining current knowledge of the relationship between water intake and health and the general status of water intake and loss. We expect that this study will be utilized for further refinement of KDRI-water. Methods: Documents were searched using RISS, NDSL, DBPIA, CINAHL, and Pubmed with the keywords 'water intake, water supply, water ingestion, hydration, dehydration, water balance, and fluid balance'. Results: Water balance is essential for the maintenance of health. Based on this assumption, numerous studies have been performed to investigate the association of water intake with several diseases such as urolithasis, obesity, diabetes, and cancer as well as other health problems, including constipation, cognition, and fetal weight. Effects of water intake for prevention or relief of these health problems vary. Water is supplied to the body by eating foods and drinking liquids such as plain water and beverages. Metabolic water is another source of water input. Water is lost through urine, skin, respiration, and feces. KDRI-water 2015 was set by adequate intake (AI) based on water intake volume, which was the sum of water intakes from foods and fluids reported by the Korea National Health and Nutrition Examination Survey, with extra milk intake of 200 mL. AIs in some age groups were modified considering their estimated energy requirements. Conclusion: Accurate data of water intake is critically important for the establishment of KDRI-water. Therefore, improvement of systems investigating water intake is required, and more studies on the status of water intake and loss in Korean people are needed for definite KDRI-water establishment.

• Journal of Mechanical Science and Technology
• /
• 제16권9호
• /
• pp.1102-1111
• /
• 2002

The study focuses on the heat transfer performance of two-phase closed thermosyphons with plain copper tube and tubes having 50, 60, 70, 80, 90 internal grooves. Three different working fluids(distilled water, methanol, ethanol) are used with various volumetric liquid fill charge ratio from 10 to 40%. Additional experimental parameters such as operating temperature and inclination angle of zero to 90 degrees are used for the comparison of heat transfer performance of the thermosyphon. Condensation and boiling heat transfer coefficients, heat flux are obtained using experimental data for each case of specific parameter. The experimental results are assessed and compared with existing correlations. The results show that working fluids, liquid fill charge ratio, number of grooves and inclination angle are very important factors for the operation of thermosyphons. The relatively high rate of heat transfer is achieved when the thermosyphon with internal grooves is used compared to that with plain tube. The optimum liquid fill charge ratio for the best heat transfer performance lies between 25% and 30%. The range of the optimum inclination angle for this study is 20$^{\circ}$～30$^{\circ}$ from the horizontal position.

• 대한한방소아과학회지
• /
• 제17권1호
• /
• pp.17-27
• /
• 2003

Background: Snoring in children, is associated Kith adenotonsillar hypertrophy and sinusitis which contribute to upper airway obstruction, so we studied the sinusitis and adenoid size of snoring children with plain radiography Materials and method: Fifty patients having snoring, nasal obstruction in our hospital between November 2001 and November 2002 were studied using plain radiology PNS(water's view) and Neck lateral view(adenoid size with A/N ratio) Results: 1. In oriental medicine, Hu-Bi means laryngopharyngeal edema and obstruction, laryngopharyngeal disease are due to Hwa-Yeoul( fire and hot), sinus disease are due to Fung-Han(wind and cold) and Fung-Yeoul(wind and hot). 2. Age ranged from 2 to 17 year-old ( mean age: 6 years), 5-7 year-old were 18 patients (36%). Age of on set, 25 patients were 1-4 year-old (50%). 3. Of the 50 snoring patients, 37 patients were sinusitis(74%), 20 patients had enlarged adenoid(40%). Of the 20 large adenoid patients, 19 patients were sinusitis(95%). 4. Of the 50 snoring patients, size of tonsil were flowed. Fifteen were severe(3+), 17 patients were moderate(2+) and 15 patients were mild(1+). Of the 20 enlarged adenoid patients, size of tonsil flowed. Five were severe(3+), 11 patients were moderate(2+) and 4 patients were mild(1+). Conclusion : Of the 50 Snoring patients, 37 patients showed sinusitis(74%), 32 patients showed large tonsil(64%), 20 patients showed large adenoid(40%).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.239-244
• /
• 2003

This study concerns the performance of condensing heat transfer in two-phase closed thermosyphons with various helical grooves. Distilled water, methanol, ethanol have been used as the working fluid. In the present work, a copper tube of the length of 1200mm and 14.28mm of inside diameter is used as the container of the thermosyphon. Each of the evaporator and the condenser section has a length of 550mm, while the remaining part of the thermosyphon tube is adiabatic section. A experimental study was carried out for analyzing the performances of having 50, 60, 70, 80, 90 helical grooves. A plain thermosyphon having the same inner and outer diameter as the grooved thermosyphons is also tested for the comparison. The type of working fluid and the numbers of grooves of the thermosyphons with various helical grooves have been used as the experimental parameters. The experimental results have been assessed and compared with existing theories. The results show that the type of working fluids are very important factors for the operation of thermosyphons. And the maximum enhancement (i.e. the ratio of the heat transfer coefficients the helical thermosyphons to plain thermosyphons) is $1.5{\sim}2$ for condensation.

• 대한기계학회논문집B
• /
• 제29권1호
• /
• pp.116-122
• /
• 2005

This study concerns the performance of condensing heat transfer in two-phase closed thermosyphons with various helical grooves. Distilled water, methanol, ethanol have been used as the working fluid. In the present work, a copper tube of the length of 1200mm and 14.28mm of inside diameter is used as the container of the thermosyphon. Each of the evaporator and the condenser section has a length of 550mm, while the remaining part of the thermosyphon tube is adiabatic section. A experimental study was carried out for analyzing the performances of having 50, 60, 70, 80, 90 helical grooves. A plain thermosyphon having the same inner and outer diameter as the grooved thermosyphons is also tested for the comparison. The type of working fluid and the numbers of grooves of the thermosyphons with various helical grooves have been used as the experimental parameters. The experimental results have been assessed and compared with existing theories. The results show that the type of working fluids are very important factors for the operation of thermosyphons. And the maximum enhancement (i.e. the ratio of the heat transfer coefficients the helical thermosyphons to plain thermosyphons) is $1.5{\sim}2$ for condensation.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2014년도 추계 학술논문 발표대회
• /
• pp.11-12
• /
• 2014

In this study, fundamental properties of concrete mixed with fiber has been analysed. Compressive strength, tensile strength and plastic shrinkage has been tested to conduct the optimum addition ratio of fiber. Effect to control press concrete's cracking has been tested. The following results could be made as the conclusion. For the flowability, slump decreased about 41-79% when all types of fiber used in the concrete. When the addition ratio of fiber is 1.2%, the slump of concrete decreased about 45%. For the strength properties. all the specimens with different addition ratio of fiber shown higher compressive strength comparing with Plain. Comparing with Plain, cracking decreased when the fiber added. Especially, when NY fiber used in the concrete, the plastic shrinkage did not occurred. In addition, Latex modified concrete(LMC) has improved superior physical and chemical properties. The properties of latex, combined with the low water-cement ratio, produce a concrete that has improved flexural, tensile, and bond strength, lower modulus of elasticity, increased freeze-thaw resistance, and reduced permeability compared to conventional concrete of similar mix design.

• 수산해양교육연구
• /
• 제5권2호
• /
• pp.119-127
• /
• 1993

This work studies for heat transfer and pressure drop performance of integral inner and outer fin tubes, designed to enhance the heat transfer performance of smooth tubes for in recipro and turbo refrigerator or high performance compact heat exchangers. Eight different inner spiral fin copper tubes with integral fin at outside surfaces were employed to improve boiling heat transfer coeffcient. For comparison, tests were made using a plain tube having the inside diameter and an outside diameter equal to that at the root of the fins for the finned tubes. Pool boiling heat transfer is investigated experimentally and theoretically on single tube arrangement. The refrigerant evaporates at a saturation state of 1 bar on the outside tube surface heated by hot water. The refrigerant R11 ($CFCl_3$) was used at a pressure of $P_s=1bar$ as a convenient test fluid with a boiling temperature of $T_s=23.6^{\circ}C$. The observed heat transfer enhancement of boiling for finned tubes significantly exceeded that to be expected on grounds of increased area. The maximum Vapor - side enhancement(i.e., vapor - side heat transfer coefficient of finned tube/vapor - side coefficient for plain tube) was found to be around 4 at 1299fpm - 30grooves tube.