• Journal of the Korean Wood Science and Technology
• /
• 제38권4호
• /
• pp.306-315
• /
• 2010

상대적으로 단면이 작은 부재를 현장에서 조립하는 응력적층 방식은 방부처리 및 운반, 설치 등에 장점을 가지고 있어 경간이 짧고 통행빈도가 낮으면서 현장접근이 불리한 휴양림 진입로나 임도 등의 목조교량에 활용 가능성이 높다. 따라서 본 논문에서는 응력적층재를 이용한 차량용 교량의 구조설계기술 개발의 일환으로 방부 처리된 국산 리기다소나무로 제작된 응력적층재의 거동 특성을 실험실적으로 분석하였다. 먼저 방부처리에 의한 리기다소나무의 횡압축 성능 변화와 응력적층재 제작과정에서 요구되는 중앙천공이 제재목의 휨성능에 미치는 영향을 분석하였다. 다음으로 응력적층재의 설계시에 고려되어야 할 것으로 판단되는 프리스트레스 압체력, 볼트간격, 층재개수, 평삭가공 여부가 휨성능에 미치는 영향을 확인하였다. 연구결과 응력적층재 제작과정에서 제재목의 평삭가공은 불필요하며, 3.0 kg/$cm^2$ 이상의 프리스트레스 압체력에서 부재의 휨강성이 기준의 80% 수준으로 유지됨이 확인되었다. 볼트간격과 층재개수의 영향에 대해서는 추후 현장실험 등을 통해 보다 넓은 범위에서의 검토가 요구된다. 본 연구결과는 국내 차량용 목조교량을 도입하기 위한 구조해석 및 설계절차를 확립하는데 있어서 기초자료로 활용될 것으로 기대된다.

• 센서학회지
• /
• 제12권2호
• /
• pp.72-78
• /
• 2003

본 논문은 마이크로 플럭스게이트 자기 센서 (micro fluxgate magnetic sensor)의 여자코일 선폭에 따른 자계 검출 특성 변화에 관한 것이다. 센서 제작을 위해 PCB 다층 적층기술을 사용하였으며, 연자성 코어를 둘러싼 여자코일 선폭을 각각 $260\;{\mu}m$와 $520\;{\mu}m$로 센서를 구현하였다. 센서는 모두 5층의 기판을 적층 하였으며, 가운데 (3번째)기판을 자성체 코어로, 자성체 코어 외부 (2번째와 4번째)기판을 여자코일로, 최외부 (1번째와 5번째)기판을 검출코일로 제작하였다. 연자성 코어로는 약 100,000의 큰 DC 투자율 (permeability)을 갖는 코발트 (Co)가 주성분인 아몰퍼스 재료를 사용하였으며, 자속 누설을 최소화하기 위해 사각 링 형태를 유지하였다. 솔레노이드 형태의 여자코일과 검출코일은 구리 재질로 제작되었다. $260\;{\mu}m$ 여자코일 선폭을 갖는 자기센서는 여자조건이 360 kHz, $3\;V_{p_p}$의 정현파일 경우에 780 V/T로 매우 우수한 감도를 보이고 있으며, $-100\;{\mu}T\;{\sim}\;+100\;{\mu}T$ 영역에서 매우 우수한 선형특성을 보이고 있다. 자기 센서의 크기는 $7.3\;{\times}\;5.7\;mm^2$이며, 소비전력은 약 8 mW이다. 이런 초소형 자기센서는 휴대용 네비게이션 시스템, telematics, VR 게임기 등 다양한 응용분야에 적용할 수 있다.

• 한국의학물리학회:학술대회논문집
• /
• 한국의학물리학회 2002년도 Proceedings
• /
• pp.457-460
• /
• 2002

The image quality of three-dimensional (3D) images has been widely investigated by the qualitative analysis method. A need remains for an objective and quantitative method to assess the image quality of 3D volume-rendered images. The purpose of this study was to evaluate the quantitative accuracy of distance measurements on 3D volume-rendered images of a dry human skull by using multi-detector computed tomography (MDCT). A radiologist measured five times the twenty-one direct measurement line items composed among twelve reference points on the skull surface with a digital vernier caliper. The water filled skull specimen was scanned with a MDCT according to the section thicknesses of 1.25, 2.50, 3.75, and 5.00 mm for helical (high quality; pitch 3:1) scan mode. MDCT data were reconstructed with its acquisition section thickness and with 1.25 mm section thickness for all scans. An observer also measured seven times the corresponding items on 3D volume-rendered images with measuring tools provided by volumetric analysis software. The quantitative accuracy of distance measurements on the 3D volume-rendered images was statistically evaluated (p-value < 0.05) by comparatively analyzing these measurements with the direct distance measurements. The accuracy of distance measurements on the 3D volume-rendered MDCT images acquired with 1.25, 2.50, 3,75 and 5.00 mm section thickness and reconstructed with its section thickness were 48%, 33%, 23%, and 14%, respectively. Meanwhile, there were insignificant statistical differences in accuracy of distance measurements among 3D volume-rendered images reconstructed with 1.25 mm section thickness for the each acquisition section thickness. MDCT images acquired with thick section thickness and reconstructed with thin section thickness in helical scan mode should be effectively used in medical planning of 3D volume-rendered images. The quantitative analysis of distance measurement may be a useful tool for evaluating the quantitative accuracy and the defining optimal parameters of 3D volume-rendered CT images.

• 한국항공우주학회지
• /
• 제50권10호
• /
• pp.677-690
• /
• 2022

Actuator disk method 기반의 유동 해석자를 이용하여 수직 이착륙 복합형 비행체 중 하나인 이중 덕트 팬 항공기에 대한 공력해석을 수행하고 관련 지면 효과를 분석하였다. 회전 격자 기법을 이용한 해석결과와의 비교를 통해, 지면 효과 분석을 위한 해석자의 특성과 정확도를 함께 평가하였다. 지면과의 거리에 따른 공력 성능과 유동장 특성을 분석하였다. 지면과의 거리가 가까울수록 팬 추력은 증가하지만, 덕트, 동체, 날개의 수직력 감소로 인한 총 수직력 및 제자리 비행 효율의 저하를 확인하였다. 동체 하부의 유동장 분석으로부터 팬 후류와 지면 간의 상호작용에 의해 발생하는 지면 와류와 분수 유동을 확인하고, 이들이 비행체 공력 성능에 미치는 영향을 분석하였다. 속도 프로파일 비교/검토를 통해 비행체로부터의 거리와 방향에 따른 기체 주변 아웃워시의 강도와 특성을 분석하였다. 또한 콜렉티브 피치각에 따른 지면 효과의 영향을 확인하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(4)
• /
• pp.98-101
• /
• 2000

On CELP type Vocoders G.723.1 6.3kbps/5.3kbps Dual Rate Speech Codec, which is developed for Internet Phone and videoconferencing, uses VAD(Voice Activity Detection)/CNG (Comfort Noise Generator) in order to reduce the bit rate in a silence period. In order to reduce the bit rate effectively in this paper, we first set the boundary condition of the energy threshold to prevent the consumption of unnecessary processing time, and use three decision rules to detect an active frame by energy, pitch gain and LSP distance. To evaluate the performance of the proposed algorithm we use silence-inserted speech data with 0, 5, 10, 20dB of SNR. As a result when SNR is over 5dB, the bit rate is reduced up to about 40% without speech degradation and the processing time is additionally decreased.

• 전자공학회논문지B
• /
• 제31B권7호
• /
• pp.33-41
• /
• 1994

A single channel adaptive noise canceling (ANC) technique with a recursive time delay estimator (RTDE) is presented for removing effects of additive noise on the speech signal. While the conventional method makes a reference signal for the adaptive filter using the pitch estimated on a frame basis from the input speech, the proposed method makes the reference signal using the delay estimated recursively on a sample-by-sample basis. As the RTDEs, the recursion formulae of autocorrelation function (ACF) and average magnitude difference function (AMDF) are derived. The normalized least mean square (NLMS) and recursive least square (RLS) algorithms are applied for adaptation of filter coefficients. Experimental results with noisy speech demonstrate that the proposed method improves the perceived speech quality as well as the signal-to-noise ratio and cepstral distance when compared with the conventional method.

• 대한기계학회논문집A
• /
• 제24권2호
• /
• pp.319-328
• /
• 2000

This paper presents a new design method of the 1 generation wheel bearing unit using a numerical optimization technique in order to increase bearing fatigue life. For calculating the fatigue life, a method of load analysis is studied on the automotive wheel bearing system. The design variables selected are ball size, initial contact angle, number of balls, pitch diameter, pre-load, and distance between ball centers. The method of feasible directions in ADS (Automated Design Synthesis) is utilized to automatically find the optimum design variables. To validate the design method, a computer program is developed and applied to a practical passenger car model. The optimum design results demonstrated the effectiveness of the proposed design method showing that the system life of the optimally designed wheel bearing unit is enhanced in comparison with that of the initial ones within the given available design space.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1611-1616
• /
• 2004

The objective of this study is to simulate the etching characteristics under different process parameters for the optimization of etching process. The etching characteristics such as the etching factor were investigated under different operating conditions and compared with the spray characteristics. The spray characteristics were measured by using Phase Doppler Anemometer. The correlation between the etching characteristics and the spray characteristics was analyzed to simulate the etching characteristics under the actual parameters of the etching process. The parameters were distance of nozzle tip and pipe pitch. To improve the uniformity and value of etching factor in the etching process, the process parameters should be designed optimally. The distribution of spray was simulated by the Monte-Carlo Method and the process parameters were optimized by the design of experiments(DOE).

• 비파괴검사학회지
• /
• 제31권3호
• /
• pp.271-277
• /
• 2011

This study presents a nondestructive test for underwater PVC pipes. To use guided ultrasonic waves, specially denoted by cylindrical Lamb waves, a test setup was made in a water tank using the pitch and catch mode and specimens were made to give artificial cutouts located in the circumferential direction of the pipes. Total three states of damaged levels were considered to see how the guided waves interact with the defects. For the experimental adjustments, three different pipe diameters (60, 90, 114 mm) were tested, and two factors - incident angle (10 and $40^{\circ}$) and distance (50 and 200 mm) - were tried. From the results, regardless of the diameters and two experimental factors, it is shown that the degrees of defects were recognized through amplitude and arrived time of the very first part of the received cylindrical Lamb waves. Between amplitude and arrived time, it is found that the amplitude gives more sensitive results.

• International Journal of Precision Engineering and Manufacturing
• /
• 제8권1호
• /
• pp.73-78
• /
• 2007

The objective of this work was to simulate lead frame etching characteristics to optimize the etching process, Characteristics such as the etching factor and uniformity were investigated for different actual operating conditions, including pressure, distance from the nozzle tip, pipe pitch, and feed speed. The correlation between the etching and spray characteristics was analyzed to develop the etching model. Spray characteristics obtained from an experiment using a phase Doppler anemometer system were then simulated using a Monte-Carlo technique, The etching process model was coded in the Java language, The spray and etching characteristics were correlated with each other and simulated results agreed well with the measured data for a lead frame etching process, The optimal operating parameters under various conditions were successfully determined.