The Precision of Lead Frame Etching Characteristics Using Monte-Carlo Simulations

  • Published : 2007.01.01

Abstract

The objective of this work was to simulate lead frame etching characteristics to optimize the etching process, Characteristics such as the etching factor and uniformity were investigated for different actual operating conditions, including pressure, distance from the nozzle tip, pipe pitch, and feed speed. The correlation between the etching and spray characteristics was analyzed to develop the etching model. Spray characteristics obtained from an experiment using a phase Doppler anemometer system were then simulated using a Monte-Carlo technique, The etching process model was coded in the Java language, The spray and etching characteristics were correlated with each other and simulated results agreed well with the measured data for a lead frame etching process, The optimal operating parameters under various conditions were successfully determined.

Keywords

References

  1. Abate, K., 'Photochemical Etching of Metals,' Metal Finishing, Vol. 98, No. 6, pp. 414-417, 2000 https://doi.org/10.1016/S0026-0576(00)80439-0
  2. Sundaram, K. B., Sah, R. E., Baumann, H., Balachandran, K. and Todi, R. M., 'Wet Etching Studies of Silicon Nitride Thin Films Deposited by Electron Cyclotron Resonance Plasma Enhanced Chemical Vapor Deposition,' Microelectronic Engineering, Vol. 70, pp. 109-114, 2003 https://doi.org/10.1016/S0167-9317(03)00412-X
  3. Allen, D. M., 'The Principles and Practice of Photochemical Machining and Photoetching,' Adam Hilger, Bristol and Boston, 1986
  4. Shrimpton, J. S. and Yule, A. J., 'Drop Size and Velocity Measurement in an Electrostatic Produced Hydrocarbon Spray,' ASME Journal of Fluids Engineering, Vol. 120, pp. 580-585, 1998 https://doi.org/10.1115/1.2820703
  5. Jung, J. W., Cha, K. J. and Kim, D. J., 'Characteristics of the Droplet Behavior in the Overlap Region of Twin Spray and in Single Spray,' Transactions of the KSME, B, Vol. 24, No. 10, pp. 1300-1308, 2000
  6. Choi, Y. C., Jung, J. W. and Kim, D. J., 'Characteristics of Spray from Pressure-Swirl Nozzle with Different Liquid Properties and Nozzle Geometries,' Transactions of the KSME, B, Vol. 25, No. 12, pp. 1813-1820, 2001
  7. Visser, A. and Buhlert, M., 'Theoretical and Practical Aspects of the Miniaturization of Lead Frames by Double Sided Asymmetrical Spray Etching,' Journal of Materials Processing Technology, Vol. 115, pp. 108-113, 2001 https://doi.org/10.1016/S0924-0136(01)00751-8
  8. Ueda, R., Toki, S., Tanizaki, Y., Sugiutra, T. and Asakura, S., 'Principles of Photoetching in the Fabrication of Fine-Pitch Lead Frames,' Metal Finishing, Vol. 92, No. 1, pp. 29-31, 1994
  9. Jung, J. W. and Kim, D. J., 'A Study on Effect of Spray Characteristics on Etching Characteristics in Micro Fabrication System,' Transactions of the KSME, B, Vol. 28, No. 1, pp. 109-117, 2004 https://doi.org/10.3795/KSME-B.2004.28.1.109
  10. Jung, J. W., Kim, Y. J. and Kim, D. J., 'Correlation between Spray Characteristics and Etching Characteristics in Twin Spray,' Transactions of the KSME, B, Vol. 28, No. 4, pp. 449-455, 2004 https://doi.org/10.3795/KSME-B.2004.28.4.449
  11. Ball, D., 'Fine Line Etching of Lead Frames,' PCMI Journal, Vol. 63, pp. 29-31, 1996
  12. Goo, B. C. and Seo, J. W., 'Probabilistic Fatigue Life Evaluation of Rolling Stock Structures,' Transactions of KSAE, Vol. 11, No. 5, pp. 89-94, 2003
  13. Badano, A. and Flynn, M. J., 'Monte Carlo Modeling of Glare in CRTs for Medical Imaging,' Society for Information Display, Vol. 29, pp. 495-504, 1998
  14. Yoo, H. K., Kang, D. K., Lee, S. W. and Gweon, D. G., 'Error Analysis and Alignment Tolerancing for Confocal Scanning Microscope using Monte Carlo Method,' Journal of the KSPE, Vol. 21, No. 2, pp. 92-99, 2004
  15. Go, S. G., Go, Y. H. and An, B. J., 'Representation of Data,' Statistical Quality Control, Part 2, pp. 14-17, 2000