• 한국식품과학회지
• /
• 제34권4호
• /
• pp.737-740
• /
• 2002

홍국의 혈압강화효능과의 관련성이 시사된 GABA 및 균체량 그리고 홍국이 나타내는 가장 큰 특성 중의 하나인 색도가 서로 다른 각 홍국추출물을 SHR에 경구투여하고 투여 1시간 후부터의 7시간 후까지 혈압강하효과에 미치는 영향을 측정하였다. 모든 홍국 투여군에서 혈압강하효과가 나타났으며 이 효과는 GABA나 균체량 또는 색도와 상관관계를 나타내지 않았다.

• 한국세라믹학회지
• /
• 제55권4호
• /
• pp.368-375
• /
• 2018

This study deals with the color formation of ceramic pigment in the $TiO_2$-SnO-ZnO system. We designed compounds to control the color formation depending on the composition using the Design of Experiment. The color coordinate values of synthesized pigments, $L^*a^*b^*$ were measured and statistically analyzed color for changing elements depending on its composition. The relationship between the major crystalline phases and chromaticity was examined using XRD, and the oxidation states of each element were analyzed by XPS. The synthesized pigments based on the compound design exhibited various color changes ranging from yellow-orange to green-blue and brown. The statistical analysis on the spectrophotometer results shows that $a^*$ and $b^*$ values decreased with $TiO_2$ content, and increased with SnO content. Yellow-orange color was detected with the main peak of SnO, and the green-blue color developed with the main peak of $Zn_2TiO_4$. The $a^*$ and $b^*$ values increased with increased SnO peak intensity, and decreased with increased $Zn_2TiO_4$ peak intensity. The results revealed that pigment color formation was influenced by changes in the main crystalline phases and crystalline intensity. However, XPS analysis of the oxidation states of each element showed little correlation with the pigment chromaticity result.

• Asian-Australasian Journal of Animal Sciences
• /
• 제31권8호
• /
• pp.1213-1220
• /
• 2018

Objective: An experiment was conducted to assess the antioxidant contents and activities of colored rice grains and to evaluate their nutritive characteristics in terms of chemical composition and in situ ruminal degradation. Methods: Ten cultivars of colored rice grains (Oryza sativa L.) collected from several areas of Japan were studied, and control rice without pigment, maize, barley, and wheat grains were used as control grains. Their chemical compositions, pigment, polyphenol contents, total antioxidant capacity (TAC), and degradation characteristics were determined. Results: The starch contents of the colored rice grains were in the range of 73.5% to 79.6%, similar to that of the control rice grain. The black and red rice grains contained anthocyanin (maximum: $5,045.6{\mu}g/g$) and proanthocyanidin (maximum: $3,060.6{\mu}g/g$) at high concentrations as their principal pigments, respectively. There were significantly (p<0.05) positive relationships among the pigment contents, polyphenol content, and TAC values in the colored and control rice grains, indicating that the increase in pigment contents also contributed to the increased polyphenol content and TAC values in the colored rice grains. The dry matter and starch degradation characteristics, as represented by c (fractional degradation rate of slowly degradable fraction) and by the effective degradability, of the colored rice grains and the control rice grain were ranked as follows among commonly used grains: wheat>barley${\geq}rice$>maize. The colored rice grains also included the most-digestible starch, since their potential degradable fraction and actual degradability at 48 h incubation were almost 100%. Conclusion: Colored rice grains have high potential to be used as antioxidant sources in addition to starch sources in ruminants.

• 한국기계가공학회지
• /
• 제14권2호
• /
• pp.87-92
• /
• 2015

The injection molding process is widely used in the production of most plastic products. In order to make metal-colored plastic products like those found in modern luxury home alliances, metallic pigments are mixed with a basic resin material for injection molding. However, process control for metal-colored plastic products is extremely difficult due to the non-uniform melt flow of the metallic resin pigments. In this study, the effect of process parameters on the quality of a metal-colored plastic product is evaluated. A rapid mold cooling method using a compressed cryogenic fluid is also proposed to decrease the content of undesired compounds within the plastic product.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2001년도 추계학술발표대회
• /
• pp.315-316
• /
• 2001

In this study various nutritional and environmental parameters such as, initial moisture content, pH. inoculum size, air rate, sample size and nutrient supplement that influence pigment production were evaluated in solid-state cultures. optimum initial moisture content and pH were determined to be 50% and 6.0, respectively. The supplement of the substrate with different carbon, nitrogen, and mineral source reveals a more inhibitive effect as the substrate concentration increase. optimum aeration rate was determined to be 2vvm in flask culture. The maximum amount of red pigment, 3500 OD/g dried fermented rice, was obtained in optimum conditions which is obtained in solid flask culture.

• 한국인쇄학회지
• /
• 제21권1호
• /
• pp.1-10
• /
• 2003

Printing ink is faced various shear stress situation until it transfer to the printed substrate through the press. And in each shear stress condition the ink is needed to keep the appropriate viscosity according to the condition. The change of printing ink viscosity has been explained by well-known through the viscosity profile curve. But actually, the quality of printed paper depends on the ink behavior after transfer the substrates. Like this, to look into the behaviour of the ink on the printed substrate, it is needed the experiment of the ink structure recovering by rheology study. In this study, by controling the $CaCO_3$ content in the ink, after investigating the effect of the ink's structure recovery of the pigment concentration, we intend to predict the printing quality of the ink behvior on the substrate depending on pigment content.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제7권1호
• /
• pp.21-25
• /
• 2002

To maximize and sustain the productivity of Monascus pigments, various environmental and nutritional parameters, such as the initial moisture content, pH, inoculum size, sample size, and nutrient supplement, that influence pigment production were evaluated in solid-state cultures as follows: initial moisture content, $50\%;$ pH, 6.0; inoculum size $1\;\times\;10^4$ spore cells $(grams\;of\;dry\;solid\;substrate)^{-1};$ sample size, 300 g. All supplementary nutrients (carbon, nitrogen, and mineral sources) added has inhibitory effects on the cell growth and red pigment production. In open tray culture the maximum biomass yield and specific productivity of red pigments were 223 mg DCW $(grams\;of\;initial\;dry\;substrate)^{-1}$ and, $47.6\;OD_{500}\;(DCW\;grams)^{-1}h^h{-1}$ respectively.

• 생명과학회지
• /
• 제21권4호
• /
• pp.610-612
• /
• 2011

본 연구는 클로로겐산의 함량을 측정하기 위한 흡광도 방법을 구축하였으며, 구체적으로는 클로로겐산이 $50^{\circ}C$와 글라이신 및 알칼리 조건하에서 녹색반응이 일어난다는 현상을 이용했다. 녹색형성은 일련의 클로로겐산 농도에 의존성을 가졌다. 본 연구에 따른 클로로겐산의 측정방법을 이용하여 블루베리에 함유된 클로로겐산의 함량을 분석하였다(12.42 mg/g d.w). 이러한 방법은 저가의 비용과 빠른 시간으로 많은 시료를 대량으로 쉽게 클로로겐산의 함량은 측정할 수 있는 효과를 가진다.

• 한국세라믹학회지
• /
• 제55권5호
• /
• pp.461-472
• /
• 2018

$Gd_2O_3:Eu/Bi$ nanoparticles were synthesized via spray pyrolysis and applied for the preparation of a luminescent pearl pigment as an anti-counterfeiting material. The luminescence properties were optimized by changing the $Eu^{3+}$ and $Bi^{3+}$ concentration. Ethylene glycol was used as an organic additive to prepare the $Gd_2O_3:Eu/Bi$ nanoparticles. The highest emission intensity was achieved when the total dopant content was 10.0 at.% and the mole fraction of Bi was 0.1. The concentration quenching was mainly due to dipole-dipole interactions between the same activators, and the critical distances were 9.0 and $19.6{\AA}$ for $Eu^{3+}$ and $Bi^{3+}$, respectively. The prepared $Gd_2O_3:Eu/Bi$ powder exhibited an average size of approximately 82.5 nm and a narrow size distribution. Finally, the $Gd_2O_3:Eu/Bi$ nanophosphor coated on the surface of the pearl pigment was confirmed to have good red emission under irradiation from a portable ultraviolet light-emitting diode lamp (365 nm).

• 한국식품저장유통학회지
• /
• 제9권4호
• /
• pp.425-428
• /
• 2002

Genus Monascus(M. pilosus and M purpureus)의 배지(Lin, SP, YM YE, GMIN, SMO, MY, GY, Nishikawa, sucrose, stock culture, Mizutani, modified Lit Toya 및 쌀배지)에 따른 균의 증식도와 색소생성량을 조사하였다. M. pilosus 및 M purpureus의 증식도가 높은 배지는 Mizutani 배지와 Lin 배지 였으며 3$0^{\circ}C$에서 10일간 배양하였을 때 생균체 무게는 각각 24.5~26.9 g/100 mL 및 15.9~17.2 g/100 mL이였고 M. pilosus의 성장률이 높았다. 색소생성량이 높은 배지는 두 균주 다같이 Lin 및 Mizutani 배지였으며 각각 흡광도는 1.2~1.6 및 0.8~l.0이었다. 균주 중에서는 M. pilosus에서 높았다.