• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.50-54
• /
• 2010

In this study, reliability-based design optimizations of airfoils were performed. PARSEC function was used to consider the uncertainty of the aerodynamic shape for the reliability-based shape optimization of airfoils. Among aerodynamic performance. The accuracy of the reliability analysis was compared with other method and it was found that the moment method predicts the probability accurately. Deterministic and reliability-based optimizations were performed for shape of the RAE2822 airfoil and it was demonstrated that reliability-based optimizations the aerodynamic performances under uncertainties of the shape of the airfoil.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.6
• /
• pp.1863-1871
• /
• 2016

This paper presents an application of fractional order controller for the control of multi input multi output twin rotor aerodynamic system. Dynamics of the considered system are highly nonlinear and there exists a significant cross-coupling between the horizontal and vertical axes (pitch & yaw). In this paper, a fractional order model of twin rotor aerodynamic system is identified using input output data from nonlinear system. Based upon identified fractional order model, a fractional order PID controller is designed to control the angular position of level bar of twin rotor aerodynamic system. The parameters of controller are tuned using Nelder-Mead optimization and compared with particle swarm optimization techniques. Simulation results on the nonlinear model show a significant improvement in the performance of fractional order PID controller as compared to a classical PID controller.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.7 s.250
• /
• pp.700-706
• /
• 2006

This study presents a numerical procedure to optimize the shape of dimple surface to enhance turbulent heat transfer in a rectangular channel. The response surface based optimization method is used as an optimization technique with Reynolds-averaged Wavier-Stokes analysis of fluid flow and heat transfer with shear stress transport (SST) turbulence model. The dimple depth-to-dimple print diameter ratio, channel height-to-dimple print diameter ratio, and dimple print diameter-to-pitch ratio are chosen as design variables. The objective function is defined as a linear combination of heat transfer related term and friction loss related term with a weighting factor. full factorial method is used to determine the training points as a mean of design of experiment. The optimum shape shows remarkable performance in comparison with a reference shape.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.647-649
• /
• 2004

When a controller is implemented by a one-chip processor with fixed-point operations, the finite alphabet problem usually occurs since parameters and signals should be taken in a finite set of values. This paper formulates PID finite alphabet PID control problem which combines the PID controller with the finite alphabet problem. We will propose a PID parameter tuning method based on an optimization algorithm under the finite alphabet condition. The PID parameters can be represented by a fixed-point representation, and then the problem is formulated as an optimization with constraints that parameters are taken in the finite set. Some simulation are to be performed to exemplify the performance of the PID parameter tuning method proposed in this paper.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.9
• /
• pp.1266-1272
• /
• 2014

We define the mobile robot navigation problem as an optimization problem to minimize the cost function with the pose error between the goal position and the position of a mobile robot. Using Gauss-Newton method for the optimization, the optimal speeds of the left and right wheels can be found as the solution of the optimization problem. Especially, the rotational speed of wheels of a mobile robot can be directly related to the overall speed of a mobile robot using the Jacobian derived from the kinematic model. When the robot detects the obstacle using sensors, the sub-goal switching method is adopted for the efficient obstacle avoidance during the navigation. The performance was evaluated using the simulation and the simulation results show the validity of the proposed method.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1999.04a
• /
• pp.110-120
• /
• 1999

Topology optimization is used for determining the best layout of structural components to achieve predetermined performance goals. In the present study, we consider that the objective function is to maximize the natural frequency of the structure for a designated mode and the constraint function is to constrain a total material usage. In this paper, using a topology optimization technique based on the homogenized material and the chessboard prevention strategy, we obtain the optimal layout and the reinforcement of an elastic structure. Several examples are presented to show the ability of the topology optimization technique used in this paper to deal with an optimal layout problem for a free vibration structure.

• 한국전산유체공학회:학술대회논문집
• /
• 2010.05a
• /
• pp.187-194
• /
• 2010

Shape optimization of an upper plenum of PBMR type gas cooled nuclear reactor has been performed by using three-dimensional Reynolds-Averaged Navier-Stokes (RANS) analysis and surrogate modeling technique. The objective function is defined as a linear combination of uniformity of flow distribution in the core and pressure drop in the upper plenum and the core. The ratio of thickness of slot to diameter of rising channels, ratio of height of upper plenum to diameter of rising channels, and ratio of eight of the slot at inlet to outlet, are used as design variables for optimization. Design points are selected through Latin-hypercube sampling. The optimal point is determined through surrogate-based optimization method which uses 3-D RANS analyses at design points. The results show that the optimum shape represent remarkably improved performance in flow uniformity and friction loss than the reference shape.

• Journal of computational fluids engineering
• /
• v.15 no.3
• /
• pp.16-23
• /
• 2010

Shape optimization of an upper plenum of a PBMR type gas cooled nuclear reactor has been performed by using three-dimensional Reynolds-Averaged Navier-Stokes (RANS) analysis and surrogate modeling technique. The objective function is defined as a linear combination of uniformity of flow distribution in the core and pressure drop in the upper plenum and the core. The ratio of thickness of slot to diameter of rising channels, ratio of height of upper plenum to diameter of rising channels, and ratio of height of the slot at inlet to outlet, are used as design variables for optimization. Design points are selected through Latin-hypercube sampling. The optimal point is determined through surrogate-based optimization method which uses 3-D RANS analyses at design points. The results show that the optimum shape represent remarkably improved performance in flow uniformity and friction loss than the reference shape.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.6
• /
• pp.1041-1049
• /
• 2003

In this paper, a new local two-point approximation method which is based on the exponential intervening variable is proposed. This new algorithm, called the Two-Point Convex Approximation(TPCA), use the function and design sensitivity information from the current and previous design points of the sequential approximate optimization to generate a sequence of convex, separable subproblems. This paper describes the derivation of the parameters associated with the approximation and the numerical solution procedure. In order to show the numerical performance of the proposed method, a sequential approximate optimizer is developed and applied to solve several typical design problems. These optimization results are compared with those of other optimizers. Numerical results obtained from the test examples demonstrate the effectiveness of the proposed method.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2013.12a
• /
• pp.8-12
• /
• 2013

DNV crane criteria are specially designated for the vessel equipped with lifting crane to cover the risk during the crane operation. Based on the DNV crane criteria, the crane performance shall be decided. The weight control has great importance in the management of vessel's design for crane vessel. To evaluate limitation of lightship weight and the effect of design changes sufficiently, the lightship allowable VCG curve was used. The optimization process was carried out for generation of the lightship allowable VCG curve due to the difficulty coming from the characteristic of DNV crane criteria. This paper includes the introduction to the DNV Crane criteria and optimization process for evaluation in aspect of lightship weight and VCG.