• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 춘계 학술발표회 제20권1호
• /
• pp.125-128
• /
• 2008

오늘날 많은 연구기관에서 구조물 설계에 관한 연구가 수행되고 있는 가운데 내진분야에서 처음으로 구조물에 대한 성능기반설계에 대한 기본개념이 제시되었다. 이후 여러 연구기관에서 성능기반설계를 수행하기 위해 사용자와 설계자 간의 의사소통을 원활히 이루어지게 하기 위해 요구성능에 대한 기준을 정립를 하였다. 성능기반설계는 구조물이 위치하게 될 지역적 특성이나 구조물의 특성에 따라 구조물에 발생될 수 있는 위험에 대한 정확한 분석과 구조물에 대한 사회적 경제적 환경적 영향에 대한 분석을 통하여 구조물에 요구되는 요구성능에 맞추어 구조물을 설계하여 공용기간동안 구조물에 대한 안전을 보장하는 설계방법이다. 구조물에 대한 정확한 요구성능을 파악하기 위해 성능수준 및 성능목표에 대한 정의가 필요하여 본 연구에서 성능기반설계를 수행하기 위해 ATC-40(2002), FEMA-273(1997), Eurocode(1998)에서의 요구성능기준에 관한 기초자료를 조사하였다.

• Earthquakes and Structures
• /
• 제22권1호
• /
• pp.95-107
• /
• 2022

This paper introduces a novel, rigorous, and efficient probabilistic methodology for the performance-based optimal design (PBOD) of semi-active tuned mass damper (SATMD) for seismically excited nonlinear structures. The proposed methodology is consistent with the modern performance-based earthquake engineering framework and aims to design reliable control systems. To this end, an optimization problem has been defined which considers the parameters of control systems as design variables and minimization of the probability of exceeding a targeted structural performance level during the lifetime as an objective function with a constraint on the failure probability of stroke length damage state associated with mass damper mechanism. The effectiveness of the proposed methodology is illustrated through a numerical example of performance analysis of an eight-story nonlinear shear building frame with hysteretic bilinear behavior. The SATMD with variable stiffness and damping have been designed separately with different mass ratios. Their performance has been compared with that of uncontrolled structure and the structure controlled with passive TMD in terms of probabilistic demand curves, response hazard curves, fragility curves, and exceedance probability of performance levels during the lifetime. Numerical results show the effectiveness, simplicity, and reliability of the proposed PBOD method in designing SATMD with variable stiffness and damping for the nonlinear frames where they have reduced the exceedance probability of the structure up to 49% and 44%, respectively.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.793-798
• /
• 2005

The performance functions of a suspension must provide often place conflicting demands upon rail bogie design since design parameters which may be altered to improve performance in one area may simultaneously reduce performance in another area. To determine compromised design parameters, it is need to carry out a number of simulations and trade-off studies. The suspension design system based on computer simulations is presented. The system is composed of analysis solvers and GUI which have functions such as modeling, analysis and sensitivity analysis.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 추계학술대회 논문집
• /
• pp.727-732
• /
• 2009

The objective of this study is to analyze and evaluate design factors relating to sound reduction performance in dry wall system. The main contents of this study are as follows. 1) Analysis and pre-evaluation of sound reduction performance of drywall system ; The sound reduction performance was pre-evaluated by INSUL simulation and these results of analyzing walls were analyzed by screening DOE(design of experiment) for selecting major factors that dominant influence the sound reduction performance. These main factors relating to sound reduction performance can be used for development of 1st grade sound reduction performance drywall system. 2) Design and evaluation of 1st grade sound reduction performance drywall system; The evaluation test of the sound reduction performance gave vaues higher than 1st grade (Rw+C=64). When campared with existing dry wall system, respectivelly, the new system shows performance higher than 8 dB.

• 대한치과기공학회지
• /
• 제42권4호
• /
• pp.394-401
• /
• 2020

Purpose: The present study is an analysis of the extents of class satisfaction of college students who had applied the design thinking technique to capstone design class. Methods: The experimental method involved an analysis of 122 cases of data where advance and post replies were performed for the subject by students who had applied the design thinking technique and students who had not. The students involved had attended the capstone design class as a junior in the Department of Dental Technology at D University. Results: In the satisfaction with performance process of the capstone design class, five questions among nine had a high positive rating, while all eight questions on the satisfaction with performance methods had a high negative rating. Among ten questions on subjective learning outcomes, six showed a high positive rating. After the application of the design thinking class method, all mean values of the group with the application were higher than the group with no application in satisfaction with performance process, satisfaction with performance method, and subjective class outcomes. Hence, the design thinking class did have positive effects on the students' improvement of class. Conclusion: Based on the results of the study, it is implied that the considerations about diverse class composition methods and operation methods capable of improving the students' satisfaction are needed for efficient operation of the capstone design class.

• Earthquakes and Structures
• /
• 제15권2호
• /
• pp.155-164
• /
• 2018

Design of structures subjected to blast loads are usually carried out through nonlinear inelastic dynamic analysis followed by imposing acceptance criteria specified in design codes. In addition to comprehensive aspects of inelastic dynamic analyses, particularly in analysis and design of structures subjected to transient loads, they inherently suffer from convergence and computational cost problems. In this research, a strategy is proposed for design of steel moment resisting frames under far range blast loads. This strategy is inspired from performance based seismic design concepts, which is here developed to blast design. For this purpose, an algorithm is presented to calculate the capacity modification factors of frame members in order to simplify design of these structures subjected to blast loading. The present method provides a simplified design procedure in which the linear dynamic analysis is preformed, instead of the time-consuming nonlinear dynamic analysis. Nonlinear and linear analyses are accomplished in order to establish this design procedure, and consequently the final design procedure is proposed as a strategy requiring only linear structural analysis, while acceptance criteria of nonlinear analysis is implicitly satisfied.

• Earthquakes and Structures
• /
• 제7권1호
• /
• pp.101-117
• /
• 2014

This paper presents a reliability-based analysis on seismic performance of timber-steel hybrid shear wall systems. Such system is composed of steel moment resisting frame and infill wood frame shear wall. The performance criteria of the hybrid system with respect to different seismic hazard levels were determined through a damage assessment process, and the effectiveness of the infill wood shear walls on improving the seismic performance of the hybrid systems was evaluated. Performance curves were obtained by considering different target non-exceedance probabilities, and design charts were further established as a function of seismic weight. Wall drift responses and shear forces in wood-steel bolted connections were used as performance criteria in establishing the performance curves to illustrate the proposed design procedure. It was found that the presence of the infill wood shear walls significantly reduced the non-performance probabilities of the hybrid wall systems. This study provides performance-based seismic evaluations on the timber-steel hybrid shear walls in support of future applications of such hybrid systems in multi-story buildings.

• 복식
• /
• 제55권8호
• /
• pp.99-111
• /
• 2005

The research analyzed the clothing attitude which it follows in type of performance musical instrument and a design preference moral difference. The result which tries to observe the clothing attitude which it follows in type of performance musical instrument and a design preference moral difference, it was visible a difference little by little. When comparison it tries the design which it prefers but consequently most in type of performance musical instrument, the big difference is not born and not to be putting the difference of the preference design which it follows in type of musical instrument specific your neck line, color, and silhouette of the vocal musician or wind music performer. When seeing whole, the clothing attitude regarding a performance luck compared to considered seriously an aesthetic pursuit and a convenient characteristic and harmonious, there design preference is the clothes which have no sleeve, neckline like camisole, black and pastel color, design with lots of decorations, princess silhouette, and they prefer the fabrics which have softness to it. Now, I want to introduce restriction of this research and proposal. First, the fundamental research of performance's clothes is insufficient with restricted point and the literature investigation is difficult, second, it was difficult to stretch the whole market for performers because of limitation for research volunteers. Only few volunteers are from college who are majoring in music.

• 유통과학연구
• /
• 제15권1호
• /
• pp.43-49
• /
• 2017

Purpose - This study is to integrate organizational factors into UCD process. For this research purpose, we investigated the organizational factors which influence people behaviors in the context of user-centred design practice(UCP). And this study presents organizational culture, organizational learning and change management as the organizational factors. Especially, this study is to investigate how change management influences the relationship between the organizational culture/learning and UCD performance. Research design, data, and methodology - Using the survey methodology with a questionnaire, this study distributed the questionnaire to the experienced 112 practitioners of user-centred design practice in 52 Korean small and medium companies. The organizations differed in range and size from medium-scale, which is under 100 of employees, and to small-scale, which is from 100 to 500. Results - Organizational culture and organizational learning have positive effects on user-centred design practice performance as expected. And change management strengthens the positive relationship between organizational learning and user-centred design practice performance but has no effect on the relationship between organizational culture and user-centred design practice performance. Conclusions - This is the first empirical study of investigating and demonstrating some key organizational factors' relationships and UCD performance of an organization, which will support to institutionalize UCD within an organization, providing theoretical foundations.

• 한국유체기계학회 논문집
• /
• 제15권5호
• /
• pp.37-41
• /
• 2012

High-efficiency and low-noise axial flow fan is developed by combining the FanDAS, a computerized axial fan design/performance analysis system, and CFD software(CFX). Based on fan design requirements, FanDAS conducts 3-D blade geometry design, quasi-3D flow/ performance analyses and noise evaluation by using through-flow analysis method and noise models for discrete frequency and broadband noise sources. Through the parametric studies of fan design variables using FandDAS, preliminary and baseline design is achieved for high efficiency and low noise fan, and then can be coupled with a CFD technique such as the CFX code for constructing final and optimized fan design. The FanDAS-CFX coupled system and its design procedure are applied to actual fan development practice. The FanDAS provides an optimized 3-D fan blade geometry, and its predictions on the performance and the noise level of designed fan are well agreed with actual test results.