• Journal of the Korean Society of Tobacco Science
• /
• v.22 no.1
• /
• pp.45-50
• /
• 2000

In order to improve the sowing practice, pelleted seeds of tobacco NC 82(Nicotiana tobacco L.) were manufactured in use of binders at the different levels of viscosity, and their physical properties according to pellet size and biological activity in seed germination were investigated while storage time elapsed. Proper range of the binder viscosity for the pellet formation was 20.3-37.2 m.pas. At the high level of viscosity(45.7 m.pas) took longer time to form the pellet and pelleting was not easy. The high binder viscosity and large pellet size revealed higher level in hardness of the pelleted tobacco seeds, which caused the longer splitting time of pellets in water. High level of binder viscosity(37.2 m.pas) in pelleted seeds led to decrease the biological activity of tobacco seed germination by the storage at 4 t over 30 days. But at the level of 20.3m.pas in binder viscosity, the germination of pelleted seeds was little affected by the long storage time to 120 days.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.10
• /
• pp.79-83
• /
• 1971

To investigate the effects of seed treatments and liming on nodulation and growth of lucerne(Medicago sativa L.) in an upland yellow-brown earth in N.Z. the five levels of seed treatments(Uninoculated, Inoculated, Inoculated plus lime pelleted, Inoculated plus 50/50 phosphate/dolmite pelleted, Inoculated plus ta1c pelleted), and 2 levels of lime applications (0, 25kg/10a) were compared and their interactions were observed, and then the following results were obtained. 1. In oder to obtain the effective nodulation of lucerne on acid soil it is usually necessary to apply lime and inoculate the seed. 2. The coating of inoculated lucerne seed with adequate materials will promote the nodulation. 3. The pelleting of lucerne seed may be a of reducing the need for the heavy liming. 4. The finely grounded lime was the best to use origin upland yellow-brown earth. 5. When the seed were not inoculated or pelleted with inferior material, liming is very effective for the nodulation and growth of lucerne. 6. The pelleting seed will reduce the laborious work and expenditure.

• Journal of Life Science
• /
• v.19 no.4
• /
• pp.526-531
• /
• 2009

This study was conducted to identify the optimum condition for dehydration and storage for maintaining the seed vigor in pelleted carrot seeds. The water content of solid materials of un-pelleted seeds was 4.9% (F.W. basis), and that of pelleted seeds was 24%. When we dehydrated pelleted seeds for 3 hr at $25^{\circ}C$, $35^{\circ}C$, and $45^{\circ}C$, all seeds were dehydrated to 5% - the same level of water content as that before pelleting. Pelleted seeds did not show any significant difference in germination from un-pelleted seeds, and neither was there any significant time or germination difference between pelleted and un-pelleted seeds at the tested dehydration temperatures. However, the $T_{50}$ value of pelleted seeds increased about 3 days larger than that of un-pelleted seeds. Germination speed of pelleted seeds in which the dehydration period was prolonged at $45^{\circ}C$ was delayed compared to those prolonged at $25^{\circ}C$ or $35^{\circ}C$ for the same period. The optimum dehydration condition, which could be applied for large scale in the industry, was dehydration at $35^{\circ}C$ for 3 hr, and the optimum storage temperature which could maintain the seed performance was $5^{\circ}C$.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.5
• /
• pp.535-541
• /
• 1996

A seed pelleting technique was developed for easy handling of small tobacco seeds (variety, NC82) and for direct seeding in temperary planting bed or in field. The mixture of pelleting material, binder and seeds were moulded in cylindrical holes sized 2 mm diameter and 2 mm height in a plastic plate. Bentonite and cellulose powder were good materials to make pellets with CMC as binder, and bentonite formed the hardest pelleted seeds among the materials. The number of the pelleted seeds made with the same weight of the materials was different with materials used and the number of seeds contained in a pelleted seed could be controlled by mixture ratio of materials and seeds. The seedless pellets ranged 6.9 to 16.0% at the ratio of pelleting material and seed for 2~3 seeds in a pellet. The moisture absorption rate at 100% RH and $25^{\circ}C$ was greater in the order of clay < bentonite < cellulose. Germination rates of pelleted seeds with bentonite and cellulose were similar to that of usual seed, but it was significantly lower with clay pelleted seeds.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1997.10a
• /
• pp.80-81
• /
• 1997

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.41 no.6
• /
• pp.678-684
• /
• 1996

Seed pelleting have successfully been used in many crops for better crop estab-lishment and for mechanizing seeding process for small crop seeds in developed countries. In this experiment various pelleting materials and binders were tested to get basic information on the shape, hardness and germination of pelleted seesds of cabbage (cv. Seoul Beachoo) and rice (cv: Ilpoom). PLL-11, paper clay, lime and coal ash were good materials to make smooth shape of the pellets with pel gel and AG-11 as binders, and PLL-ll as material and pelgel and AG-11 as binders were the best among them in consideration of shape and hardness together. The hardness of the pelleted seeds were differed with each other depending on both of the pelleting materials and binders. Pelleted cabbage seeds coated by pelgel as binder with different materials showed lower germination percentge than control in general, but the seeds pelleted by PLL-11 with different binders showed no restraint effects. When the cabbage seed pelleted by PLL-11 with pelgel as binder showed almost same germination percentage as control. The pH and electrical conductivity of the extract from bentonite and zeolite were very higher than other materials tested and germination percentage showed a little lower than control when the cab-bage seed planted on the filter paper damped with the extract. As a result, PLL-11 as pelleting material and pel gel and AG-11 as binder appeared the good materials to make pellets of cabbage seeds and rice in consideration of shape, hardness and germination.

• Journal of Bio-Environment Control
• /
• v.13 no.1
• /
• pp.8-15
• /
• 2004

Seedling mechanization of lettuce is known to be difficult due to the small seed size and the irregular seed shape. The purpose of seed pelleting is to make seedling mechanization possible by enlarging the seed size. After that, it can reduce seedling and thinning labours and can also save seeds. According to the results, there were significant differences on the percent germination and day to 50% final germination in accordance with the pelleting polymer. Among the pelleting polymer, gemination of seeds using polynimyl alcohol (PVA) was generally smooth, and followed by polyvinyl pyrrolidone (PVP), hydroxyethyl cellulose (HEC), methyl cellulose (MC), and wteen 80. The germination rate was also different according to the pelleting particulate matters. Generally, percent germination and speed of seed using the mixture of diatomaceous earth, talc and calcium carbonate were higher and faster than using other polleting materials, respectively. Thus, it should be suitable pelleting particulate matter for the pelleting of lettuce seeds. On the other hands germination of seeds using limestone, calcium oxide and benonite were low. The seed size of lettuce after pelleting was 33 times as large as the raw seed size. During the process of seed pelleting, netrient addition induced the decrement on the germination and the delay of germination speed. Also, there was differences in the germinability of pelleted seeds in accordance with the addition of nutrient sources. MS medium was generally lower than monosodium phosphate in inhibition of seed germination. Germination of pelleted seeds after priming was higher than the seeds without the treatment, and also showed the trend of early germination.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.3
• /
• pp.130-133
• /
• 2006

This study was conducted to select Codonopsis lanceolata seed's new pelleting particulate materials and adhesives. Different adhesives (Polyvinyl alcohol (PVA), Carboxymethyl cellulose (CMC), Polyvinyl pyrrolidone (PVP), Xanthan gum (XG), Arabic gum (AG)) and particulate materials (Illite, Diatomite, Pyrophyllite + Illite + Diatomite (PID), Pyrophyllite + Illite + Talc (PIT), Bentonite + Talc (BT)) were tested for seed pelleting. PID for Codonopsis lanceolata seed pelleting appeared to be the best particulate material. Among the pelleting adhesives, PVP was the best adhesive for seed pelleting, and the optimum concentration for germination of pelleting seed was 1 %. Germination rate of the pelleted seeds treated with PID particulate material and PVP adhesive was higher (86.8%) than those of raw seeds (85.5%). $T_{50}$ and MDG of pelleted Codonopsis lanceolata seed required five and eight days at soil moisture content of 50%, respectively.

• Journal of Animal Science and Technology
• /
• v.47 no.3
• /
• pp.475-480
• /
• 2005

Surface sowing is one of the most important methods to establish and improve grassland. An interest in seed-coating technique for surface sowing has been increased tremendously in the world today. An experiment was conducted to develop a technique for pelleting seeds for pasture production in woodlands. Results showed that pelleting seeds was a better technique than coating seeds because the pelleting reduced coating time of seeds, and it increased the amounts of coated seeds per hour. The pelleting technique was able to minimize damage to seeds through the lower temperature processing and by reducing time for drying, thus, germinating energy, and germination rate of pelleted alfalfa seeds improved. Emergence, establishment, and early growth of alfalfa from pelleted seeds were also improved in woodlands. Based on this study, we could conclude that the seed-pelleting is a very useful technique for the establishment and early growth of alfalfa in woodlands.

• Korean Journal of Medicinal Crop Science
• /
• v.7 no.3
• /
• pp.213-217
• /
• 1999

Seed coating and pelleting techniques have been used in many crops to improve the germination vigor of tiny and light seeds. Cultivated Chinese-foxglove (Rehmannia glutlnosa) has been infected by various types of virus derived from vagetative propagation of rootstock. Seed characteristics and alginate-coated seed germination rate have been investigated to get basic information for healthy seedling production through seed propagation. Chinese-foxglove showed different numbers of seeds per pod from 61 in Seocheon local to 207 in Jiwhang 1 and 1,000grain weight also varied from 70mg of Seocheon local to 130mg of Jiwhang 1. Seeds of Chinese-foxglove has dormancy because that seed collected last year more stimulated than that of this year at germination test. Optimum alginate concentration for pellected seeds germination was 2%.