• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1876-1877
• /
• 2011

In this paper, a winding fault diagnosis method base on MCSA(Motor Current Signature Analysis) for BLDC motor is proposed. This method is programmed by LabVIEW for winding fault diagnosis. For winding fault diagnosis, two types of winding fault(shorted turn at one pole, shorted turn at two pole in same phase) are put intentionally in on phase. The motor current is collected by hole sensor, and transformed by the Park's transform, and then the Park's Vector Pattern are obtained, Usually this pattern is formed an ellipse, so a proper threshold value of distortion ratio(the ratio of the shortest axis and longest axis of ellipse) is suggested for winding faults diagnosis.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.2
• /
• pp.128-136
• /
• 1991

A neural network of multi layer perception type, learned by error back propagation learning rule, is generally used for the verification or clustering of similar type of patterns. When learning is completed, the network has a constant value of output depending on a pattern. This paper shows that the intensity of neuron's out put can be controlled by a function which intensifies the excitatory interconnection coefficients or the inhibitory one between neurons in output layer and those in hidden layer. In this paper the value of factor in the function to control the output is derived from the know values of the neural network after learning is completed And also this paper show that the amount of an increased neuron's output in output layer by arbitary value of the factor is derived. For the applications increased recognition performance of a pattern than has distortion is introduced and the output of partially damaged neurons are first managed and this paper shows that the reduced recognition performance can be recovered.

• Proceedings of the KIEE Conference
• /
• 1998.07f
• /
• pp.1937-1939
• /
• 1998

This paper presents a simple switching method to generate a PWM pattern mostly relevant to signle-phase three-level PWM rectifier. The adopted PWM switching pattern is performed in a manner similar to the space vector PWM method, which is popularly used in the three-phase rectifier and inverter. A set of possible voltages has been selected so that an equation with a time integral considered within a sampling period should be satisfied every sampling time. The simulation result shows that the proposed control scheme is good in some performance criteria such as unity power factor, low harmonic distortion of input current, dynamic response and voltage balancing of two series-connected DC capacitors.

• The KSFM Journal of Fluid Machinery
• /
• v.13 no.3
• /
• pp.37-42
• /
• 2010

This study investigated on details of flow characteristics of a multi-blade fan for domestic ventilation. Experiments and analysis were carried out to describe on flow pattern with variations of cut-off angle near the scroll housing throat, which were performed by PIV measurement for the flow field and by total pressure probes. The stagnation point at cut-off region of the fan moves to the exit of the scroll housing as the cut-off angle increases. The movement of stagnation point and the variation of throat area of the scroll housing influence to the distribution of velocity magnitude at the exit of the fan. Furthermore, a large distortion of the velocity distribution at the scroll exit causes to increase mixing loss along the flow path.

• Journal of Digital Contents Society
• /
• v.6 no.1
• /
• pp.35-39
• /
• 2005

It is significantly important problem in computer what is estimating 3D information from 2D images. However, most of the related works have been interested in the analysis of the changes of 2D image, so that, they need much time to solve the complex equation and expensive device. In this paper, we first actively project the pattern of the sinusoidal wave into the object. Then, we measure the change of the phase from the distortion occurring according to the shape of the object, and we use the change of the phase in order to estimate the depth information. This is our proposal.

• Proceedings of the KIEE Conference
• /
• 2005.11a
• /
• pp.179-182
• /
• 2005

현재 액정 표시장치는 액정의 유전율 이방성 특성에 따라 Positive LC 와 Negative LC로 구분되어 개발 된다. Positive LC에는 TN(Twisted Nematic)모드와 IP(In Plane Switching) 모드가 있다. Negative LC에는 VA(Vertical alignment) 모드가 있다. 데이타 전압을 교류구동 시키므로, LCD Pixel들은 극성반전을 하게 되며, 이때 특정 Pattern에서 화면상에 비정상적인 색깔이 나타난다. 특정 Pattern이란 데이타 전압이 교류구동을 할 때, Vcom Level이 데이타 전압에 의한 Coupling 때문에 왜곡이 발생되고, 이 왜곡에 의하여 레드, 그린, 블루 Pixel의 충전을 차가 발생해서, 화면의 좌우는 적색편향 하게 보이고, 중앙은 녹색편향 발생된다.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.343-346
• /
• 2002

In recent, complex SVPWM (Space Vector PWM) algorithm can be easily implemented by high performance microprocessor and DSP. Various SVPWM techniques are widely studied due to the advantages of low harmonic distortion and high use ratio of D.C. link voltage. Most of various studies for improving of VS-PWM inverter performance are concentrated about switching pattern and zero pulse pattern split algorithms. However, dc link voltage that is determined at rated load and speed conditions is not proper in the low speed and under rated load. In this paper, analysis of current ripple with digitally implemented SVPWM inverter is introduced according to link voltage. The optimal link voltage in the designed inverter system and load condition is provided in order to suppress output voltage error and current ripple. As remaining the effective voltage vector interval per sampling period sufficiently, additional voltage error and current ripple are suppressed. The proposed algorithm is verified through digital simulation and experimental results.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.291-293
• /
• 1997

A new quadrature RF coil is designed for Breast MR Imaging. Quadrature RF coils for MRI have been useful to improve the signal-to-noise ratio (SNR) by "$\sqrt{2}$" using two orthogonal RF coils in combination. A modified Breast Quadrature coil is designed. It is a modified type of the high-pass birdcage coil. To reduce the field distortion, by using current feeding, the field pattern is optimized to achieve a quadrature circularly-polarized field pattern. The coil has been implemented for receive-only mode, and tested by phantom imaging. The experimental results show the utility of the proposed RF coil.

• Proceedings of the KIEE Conference
• /
• 1988.07a
• /
• pp.10-13
• /
• 1988

An isolated-word recognition method using adaptively partitioned multisection codebooks is proposed. Each training utterance was divided into several sections according to its pattern extracted by labeling technique. For each pattern, reference codebooks were generated by clustering the training vectors of the same section. In recognition procedure, input speech was divided into the sections by the same method used in codebook generation procedure, and recognized to the reference word whose codebook represented the smallest average distortion. The proposed method was tested for 100 Korean words and attained recognition rate about 96 percent.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.307-312
• /
• 1994

In this investigation the PFM(Pulse Frequency Modulation} will be used for optimizing PWM inverter pulse pattern. In traditional the pulse frequency of PWM is kept const. But modulated PWM's frequency in this study, the sinusoidal inverter's performance should be improved. The PWM pulsepatterns are definitely controlled so that the time-integral function of the voltage vectors in the space vector notation may show a circular locus. Further, performance index will be minimized because of minimizing distortion of output current. Finally, we will implement itusingsingle-chip microprocessor.